Files
SimpleRemoter/client/EncoderFactory.cpp
T
yuanyuanxianganddeepseek-flash a190c21217 Feature: make remote desktop tuning per client
The tuning switches lived in the master's Advanced menu and were saved
globally, so two hosts could not use different settings. The client already
sends ScreenSettings when a remote desktop starts, so the state belongs
there: the four items now sit in the remote desktop window's system menu,
directly below Screen quality, and are saved per client.

ScreenSettings had a 40-byte Reserved area at offset 56; four bytes became
TuningFlags, keeping the struct at 100 bytes with Capabilities at 96. A new
Capabilities bit marks a value written by a versioned master; old clients,
and new clients never configured, report 0 and are not trusted.

CMD_SCREEN_TUNING now ends with a version byte. A five-byte command comes
from an older master that does not know the server-only adaptive bit: the
client applies those three bits to the session but does not save them. A
fresh client starts at 0, so an old master still gets pre-feature
behaviour; the new master's 0xE default is persisted on its first session.
The per-client master copy stays as the old-client fallback, and the old
global [settings] Tuning* keys are honoured when neither exists, so an
explicit opt-out survives the migration.

Verified on the Debug server with the in-process test client: a fresh
client stored 0xE on first use; toggling VBV wrote 0xF to both sides; after
deleting the master copy and reopening, the menu restored VBV from the
client report.

Co-Authored-By: deepseek-flash
2026-11-07 14:11:47 +01:00

75 lines
2.8 KiB
C++
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
#include "EncoderFactory.h"
#include "common/config.h"
#include "common/logger.h"
#include "X264Encoder.h"
// 合规守护:DISABLE_FFMPEG_FOR_TEST=1 时硬编实现整体移出工程,仅保留 x264 软编路径
#if defined(_WIN64) && !DISABLE_FFMPEG_FOR_TEST
#include "CFFmpegH264Encoder.h"
#include "CFFmpegAV1Encoder.h"
#endif
namespace {
// 与 ScreenCapture::BitRateToCRF 同步:码率越高 CRF 越低(质量更好)。
// 仅 x264 软编路径用,硬编路径直接用 bitrate_kbps 走 CBR。
int BitRateToCRF(int bitRate) {
if (bitRate <= 0) return 23;
if (bitRate >= 3000) return 20;
if (bitRate >= 2000) return 20 + (3000 - bitRate) * 3 / 1000;
if (bitRate >= 800) return 23 + (2000 - bitRate) * 7 / 1200;
return 32;
}
}
std::unique_ptr<VideoEncoderBase> CreateEncoder(const EncoderRequest& req) {
EncoderParams p;
p.width = req.width;
p.height = req.height;
p.fps = req.fps;
#if defined(_WIN64) && !DISABLE_FFMPEG_FOR_TEST
// AV1 硬编路径(仅当客户端声明支持 AV1 解码)
// 硬件门槛高:仅 RTX 40+ / RX 7000+ / Intel Arc 才有 av1 encoder ASIC;
// 没合适硬件时 open() 全部失败,自然 fall through 到下面 H.264 路径。
if (req.encodeLevel >= LEVEL_AV1_HARD) {
auto enc = std::make_unique<CFFmpegAV1Encoder>();
p.rc = RateControl::BITRATE;
p.bitrate_kbps = req.bitrate_kbps;
if (enc->open(p)) {
Mprintf("=> encoder: %s (HW AV1, bitrate=%dk)\n", enc->backendName(), req.bitrate_kbps);
return enc;
}
Mprintf("=> all AV1 HW backends failed, falling back to H.264\n");
}
// H.264 硬编:CFFmpegH264Encoder 内部按 nvenc/qsv/amf/mf 顺序探
if (req.encodeLevel >= LEVEL_H264_HARD) {
auto enc = std::make_unique<CFFmpegH264Encoder>();
p.rc = RateControl::BITRATE;
p.bitrate_kbps = req.bitrate_kbps;
if (enc->open(p)) {
Mprintf("=> encoder: %s (HW, bitrate=%dk)\n", enc->backendName(), req.bitrate_kbps);
return enc;
}
Mprintf("=> all H.264 HW backends failed, falling back to x264\n");
}
#endif
// x264 软编兜底(无硬件 / 全失败 / 虚拟机 / 远程桌面会话场景)
if (req.encodeLevel >= LEVEL_H264_SOFT) {
auto enc = std::make_unique<CX264Encoder>();
p.rc = RateControl::CRF;
p.crf = BitRateToCRF(req.bitrate_kbps);
// capped CRF:由远程桌面对话框「远程桌面调优」控制,默认关、仅限洲际弱网勾选
p.vbv_cap = req.vbv_cap;
if (enc->open(p)) {
Mprintf("=> encoder: %s (SW, crf=%d%s)\n", enc->backendName(), p.crf,
p.vbv_cap ? ", vbv capped" : "");
return enc;
}
}
Mprintf("=> ERROR: no encoder could be opened\n");
return nullptr;
}