5bff9df3fcdaf35734b1db2c90071bd960b165bc
332
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
5bff9df3fc |
Improve: Harden the self-implemented SOCKS5 proxy listener
Follow-up to the HP-Socket replacement: the four items the first pass deliberately left out, plus two defects that the new tests turned up. The listener now binds 127.0.0.1 instead of INADDR_ANY. The dialog only ever points the user (and the Chrome shortcut) at 127.0.0.1, and an unauthenticated SOCKS5 port open on every interface is an open proxy. The SOCKS5 handshake is parsed as a byte stream. The previous code assumed one callback carried exactly one message, which happens to hold for curl and Chrome but not in general: a greeting split across segments was answered twice, and a CONNECT request followed by tunnel data in the same read dropped the trailing bytes. Each connection now keeps a pending buffer and a four-state machine (greeting, request, connecting, tunnel), and bytes that arrive before CONNECT_RESULT are replayed to the client once the tunnel opens, after the SOCKS5 reply. Flow control: the listener takes a PROXYCANRECVPROC callback that is consulted before each recv. The dialog answers it from the main connection's send queue, so a download that outruns the client link pauses the local read instead of growing the server's buffer. A 300MB transfer through the tunnel peaks 150KB above the idle working set. Handshake watchdog: sessions that stall in greeting/request/connecting are dropped after 30 seconds; established tunnels are left alone. Two defects in the log path, both surfaced by the watchdog test. Logging every 32KB chunk produced roughly 9000 posted messages for a 300MB transfer, which starved the UI thread's timers (the first watchdog run never fired) and could overflow the message queue; and every line re-set the whole 256KB text into the read-only edit. Transfers now log cumulative progress once per second and a per-connection total at teardown, panes are refreshed at most every 100ms from a dirty flag, and a failed PostMessage no longer leaks its CString. Localization: the new session-log strings were also added to en_US.ini, zh_TW.ini and de_DE.ini (16 keys each, GBK, kept in the existing FormatL section). Two of the lines were reworded instead of translated as-is: the close notice now says what happened (the client asked to close, or the downlink send failed) rather than printing the protocol token name, and the throughput arrows are now << and >> because CIniParser splits an entry at the first '=', so the old <== and ==> could never have served as keys. Testing: curl IPv4 and hostname tunnels, 4MB and 300MB transfers byte-identical, byte-at-a-time and pipelined handshakes, refused target (REP=5), SOCKS client killed mid-transfer, client process killed mid-transfer (dialog closes, port released), 20 parallel connections, five open/close cycles with no handle or thread growth, and the 30s handshake timeout. The dialog log was checked at runtime with Language=en_US and renders in English only. Co-Authored-By: deepseek-flash |
||
|
|
45e1dd9f6c |
Feature: Implement the proxy mapping listener without HP-Socket
The proxy mapping dialog ("代理映射") depended on HP-Socket: three vendored
SDK headers (4787 lines) plus #pragma comment(lib) lines pulling in four
prebuilt lib/DLL variants, all guarded by ENABLE_HPSOCKET, which has been 0
since the initial commit -- so the feature was dead code that only answered
"This feature is unavailable due to HPSocket disabled" and no build of this
repository ever ran it.
Replace that dependency with a small listener built on blocking sockets and
select, which is the same approach the client's CProxyManager and the
server's own SimpleWebSocket already take. The accept loop polls every
200 ms so Shutdown can return without closing a socket another thread is
selecting on, and each accepted connection gets a relay thread that only
has to recv and hand bytes to the dialog. Connection sockets are closed by
their relay thread alone; Disconnect only raises a stop flag and calls
shutdown() under the same lock the relay thread takes before closesocket,
so a recycled handle is never shut down by mistake. Finished threads are
parked in a graveyard and joined by the accept thread, which keeps the
thread handle count flat across open/close cycles.
ProxyMapDlg keeps the SOCKS5 state machine it had, but now stores its
per-connection state in a map keyed by the connection id instead of
relying on HP-Socket's GetConnectionExtra, and it logs through a posted
window message rather than touching CEdit from worker threads. The two log
panes in IDD_PROXY are ES_READONLY, so EM_REPLACESEL was silently ignored
(the original code had the same latent bug); the dialog now keeps the pane
text itself and writes it with SetWindowText, bounded to 256 KB per pane.
The vcxproj and filters lose the three SDK headers, and the dialog gate in
OnOpenProxyDialog loses its ENABLE_HPSOCKET check.
Tested against a Debug server with a Debug Windows client on the same
host: curl through the listener succeeds over both the IPv4 and the
hostname ATYP paths, a 4 MB transfer arrives byte-identical, a refused
target maps to SOCKS5 reply 5, killing the client mid-transfer closes the
dialog and releases the port, and five open/close cycles leave the server's
handle and thread counts unchanged.
Co-Authored-By: deepseek-flash
|
||
|
|
13c02fe50b |
Feature: Skip already-present targets in copy_files_c2c
The destination writes every chunk unconditionally, so a second call with the same arguments re-sent the whole file and returned exactly the same result as the first. Measured on an 11 MB log: the target's mtime moved and the entry count did not, and the caller had no way to tell a real transfer from a repeat. upload_file and download_file already answer this with overwrite/skipped; copy_files_c2c was the one that did not. The skip decision has to be made on the server, because the receiving end does not check whether the file exists. Before opening the transfer, a default call now lists one level of dst_dir through ListRemoteTopLevelNames - the helper upload_file already uses - and drops the paths whose basename is already there. If everything is dropped the call returns success without creating a transfer id at all, so no host is occupied and nothing is sent. overwrite=true restores the old unconditional behaviour. Name comparison follows the destination filesystem: folded on Windows, exact on POSIX. That needed a foldCase parameter on the helper, defaulted to true so upload_file keeps its behaviour. dst_dir is handed to the listing without its trailing separator, because the client concatenates "%s\*.*" and a trailing one produces "C://*.*", which FindFirstFile rejects. search_file hit the same thing. No protocol change and no client change: the packet layout, the receiver and both client platforms are untouched. Verified against a real server (build 2026-10-29 14:34:33) with a Windows 11 source and both an Ubuntu 24.04 and a Windows 11 destination. A second default call returns file_count=0, skipped=1, an empty transfer_id and skip_check_failed=false with the target's mtime unchanged; overwrite=true advances the mtime (1793276909 -> 1793281657) and reports skipped=0; a call into a non-existent directory creates it and lands the file flat; a Windows destination folds case, so a placeholder SETTINGS.INI makes a later settings.ini skip, while a POSIX destination leaves both files side by side. One documented case does not hold, and the expectation was mine rather than the code's. "Destination occupied by another tool" was supposed to fail the pre-check and still transfer with skip_check_failed=true, but BeginC2CTransfer consults the same m_Pending registry for src_id and dst_id, so the transfer is refused with -32003 before the fallback can carry it. The other door - a directory that can be written but not listed - showed the pre-check succeeding instead of failing: the Linux client reports EACCES as an empty directory rather than TOKEN_FILE_LIST_ERROR, so the call goes on to overwrite. skip_check_failed is therefore a timeout backstop that is hard to reach deliberately; the field stays, and 14.9.2 no longer claims that a busy host reaches the fallback. Section 14.9 of the design doc records the contract, those results, and one wrong turn worth keeping: an earlier round concluded that single-file C2C nested the whole absolute path under dst_dir, and added receiver-side hardening for it. The nesting came from the ad-hoc JSON-RPC test harness, which passed JSON on the command line where the shell folded \\ into \/ before Python parsed it, so the source client received a path with no backslashes left and its basename fallback - which looks for a backslash - returned the whole path. The same file sent through the real MCP client produces a clean basename. That hardening has been reverted; the defect was in the test, not the product. Co-Authored-By: deepseek-flash |
||
|
|
cd10d0cc1b |
Docs: Bring the MCP plan up to date after P10 and P11
The plan was written when the server had 54 tools in eight families, and every batch since then changed the facts it states: P10-B added the three file-write tools, P10-C the input lock, P11 the two session tools and the protocol work. Read as-is, the plan would send the next person looking for work that is already done, so the numbers, the family table and the batch table now describe the 60 tools that actually exist. The family table was rebuilt from the registration sites rather than from the previous table: nine families, and the gating column now separates "appears in tools/list" from "callable", which the old table conflated. That distinction also fixes the default-config figure - 19 tools, not the 20 stated earlier: get_keylog needs McpKeylog, download_file needs McpFileTransfer, and list_network_connections lives in the McpMachine family, so with a default of read-only and every switch off only the nine server-local read tools, eight read tools on the host and the two remark/watch tools remain. Section 5.10's field list for mcp_list_sessions was a guess written before the tool existed; it now carries the eight fields that D.5 actually returns, with the original guess kept so the change is visible. The two stale rows in 5.14 and the outdated header comment in 5.13 are marked done against the commits that did them - |
||
|
|
1c832ff7f2 |
Feature: Add MCP cancellation, progress notifications and dry runs
P11 closes the plan's last batch, entirely on the server side: no client change is required for any of it. Long-running tools now expose a cancellation flag that every wait loop checks in 500 ms slices. A cancelled tool returns through the cleanup branch it already had (late first packets still get absorbed, sub connections still get closed, pending entries still get deleted), so there is no second cleanup path to keep in sync, and the host is released within a second. Three sources set the flag: notifications/cancelled (matched on the exact JSON-RPC id, with a fallback to the display form so a request_id copied out of the session list round-trips), mcp_cancel_session (by request_id, host id or session id), and a failed SSE write when the client has gone away. The dispatcher rewrites a cancel-induced failure to -32800 so callers do not mistake it for a host fault. tools/call requests carrying _meta.progressToken are answered as text/event-stream on the same POST: the tool runs on its own thread and both the notifications/progress events and the final JSON-RPC response go out through one chunked provider. Requests without a token are unchanged. download_file reports files done vs. expected, upload_file reports bytes sent vs. total. Two new local-only tools, mcp_list_sessions and mcp_cancel_session, list and cancel in-flight sessions (calls, pending one-shots, terminal, remote control, file transfer, chat). They are deliberately not gated by the feature switches or readonly mode, since that is the only way out of a stuck request. The -32003 busy message now names the occupier: "Device busy: ... (tool=download_file, elapsed=12s)". power_action gains wait/wait_ms to verify the result against the main connection's presence (went_offline, came_back, elapsed_ms); not seeing the transition is reported as ok, not as a failure. kill_process, operate_window and the four host_control_* tools accept dry_run, which validates the target against one fresh snapshot and returns what would be affected without sending anything. Validation rejections now use -32012; -32008 stays as documented historical alias. One implementation note worth recording: the per-thread call context uses FLS, not thread_local. Any static thread_local in this server crashes the process about a second after start, because some threads come from shellcode/MemoryModule images that never ran PE TLS initialisation. Verified against a real Debug server and a real Windows client over MCP: the smoke test now passes 104 checks with 0 failures, including cancellation releasing the host in under a second, the cancelled request returning -32800, notifications/cancelled returning 202, 63 progress events with exact byte counts for a 64 MB upload, and a cleanly terminated SSE stream. Not exercised in this pass: power_action's wait=true path (it would take the test host down) and the -32006 readonly/switch-off section (every switch was on during the run). Co-Authored-By: deepseek-flash |
||
|
|
3d388f8e45 |
Feature: Add remote_block_input to MCP remote control
A GUI automation run is interrupted the moment a person at the host touches the mouse, and locking the host's keyboard and mouse is the standard answer. The client already implements COMMAND_SCREEN_BLOCK_INPUT and the MFC screen window already sends it, so the tool needs no client change: it puts the same two-byte packet [COMMAND_SCREEN_BLOCK_INPUT][0|1] on the hidden screen sub-connection that remote_open established. The gate is remote_open's own - McpRemoteControl=1 and McpReadonly=0 - because the ability to lock someone out deserves exactly the same door as the ability to drive their desktop, and Linux and Android clients are refused with -32005: they have no branch for this packet at all and would silently ignore it. Locking a host out is only acceptable if every way back in is closed, so the session now carries its own lock state and three paths release it. block=false releases it directly. block=true always carries a deadline (max_block_ms, default 300000, clamped to 1000..3600000) and a watchdog thread started with the MCP server sweeps every 500ms for expired locks, sends the release and records it; the next remote_block_input reports it as auto_unblocked so the model learns that its lock lapsed instead of assuming it is still held. remote_close and the idle reclaim both send block=false before they tear the sub-connection down, because once that connection is gone the server has no channel left and a live client process stays blocked - all three release paths write an audit line, since none of them is something a person can see. The send happens outside the MCP lock, and the watchdog takes the session's busy flag while it releases, so it cannot interleave with an injection or race a close; a failed send keeps the lock marked and retries five seconds later rather than hammering a dead connection every tick, and a session that dies under the watchdog is erased the same way an injection would erase it. Verified against a real Windows client over MCP on a Debug x64 build: block then unblock, block with a 1.5-2s deadline left to expire and reported back as auto_unblocked with the watchdog audit entry at the expected second, block with a ten-minute deadline then remote_close with "(input lock forced off)" in the audit, and the five refusals (missing block, non-boolean block, max_block_ms out of range, unknown session, offline host). The smoke test gained [4d] for those refusals; 54 checks pass. Two limits are worth stating plainly. BlockInput only works when the calling process is elevated (or UIAccess), the client ignores the API's return value, so on an ordinary client the lock silently does nothing and the tool can only promise that the command was delivered - both the tool description and the server instructions say so. And the idle-reclaim release, like the two verified paths, is only exercised at a 300s idle timeout; it shares the same send helper and was reviewed rather than timed out live. Bin/settings.ini was restored byte-exact and the Release instance was left alone. Co-Authored-By: deepseek-flash |
||
|
|
27b5431130 |
Feature: Add the file-write tools behind their own switch
P10-B adds delete_path, move_path and create_folder, and the switch they need. Reusing McpFileTransfer would have been wrong: uploading overwrites a file, deleting destroys a tree, and an operator who wants one may well not want the other. McpFileWrite is therefore a separate key, off by default, wired the way every other switch is - read from settings.ini at startup, reported as get_server_status.switches.file_write, and exposed with its own checkbox in the MCP settings dialog. The tools additionally require readonly to be off: a read-only server has no business modifying a host. No client change was needed: COMMAND_DELETE_FILE, COMMAND_DELETE_DIRECTORY, COMMAND_CREATE_FOLDER and COMMAND_RENAME_FILE already existed in the Windows file manager. The chain reuses the file-manager sub-connection and adds a phase - the main connection asks for the drive list, the sub-connection's first packet hands it to OnDriveList which sends the write command, and the client's TOKEN_*_FINISH ack moves the pending request from phase 0 to 1, where the tool sends COMMAND_LIST_FILES for the parent so the ack and the confirmation share one timeout. Only the IO thread touches the sub-connection; the tool thread just waits on the shared condvar, which keeps the sub-connection's lifetime out of its reach. The confirmation exists because the client answers unconditionally: it ignores the return values of DeleteFile, MoveFile and MakeSureDirectoryPathExists and there is no error token. ok therefore only means "the command arrived", and verified is the real answer - true when the parent listing shows the expected post-state, false when it shows the opposite, null when the listing itself did not come back (timeout or disconnect), since reporting that as false would be a lie. Linux, macOS and Android hosts are refused outright: those clients decode these paths as GBK while the server speaks UTF-8 to them for list_files, so a non-ASCII path would corrupt rather than fail. Paths are validated as UTF-8, converted to GBK exactly once, and reject %VAR%, relative paths, drive and share roots, and - for delete_path and for move_path's source - the Windows, Program Files, ProgramData, $Recycle.Bin and System Volume Information trees. create_folder gets no system-directory ban, because writing there is the same permission upload_file already has. Two defects surfaced while exercising this against a real client: create_folder's wire path has to end with a backslash, because MakeSureDirectoryPathExists treats a non-terminated last component as a file name and only creates the intermediate levels; and ResolveFileOpVerified(LookupInListing(...), isDir, ...) read isDir before the lookup ever set it - argument evaluation order is unspecified and MSVC evaluates right to left - so every create_folder reported verified=false even when the directory existed. Verified on a Debug x64 build against a Windows client over MCP: nested create_folder, upload, rename, delete, delete a tree, the failure shapes (delete with recursive=false on a directory, create_folder onto an existing file name, delete of a non-existent target) and every refusal (drive root, C:\Windows\Temp, C:\Users, %TEMP%, relative, empty, over-long, from==to, offline host, non-numeric id), with a Chinese-named directory created, renamed and deleted end to end; no file-manager window appeared in the server process during any of it. The smoke test gained section [4c], opt-in through -FileWriteDir, which asserts verified and never ok and walks a sandbox through the same path; two runs passed 69 checks with the sandbox removed afterwards. Bin/settings.ini was restored byte-exact and the Release instance was left alone. Co-Authored-By: deepseek-flash |
||
|
|
bb55f52b29 |
Feature: Add instructions, capability reporting and filters to MCP
P10-A is the first batch of the next MCP phase: the server now tells a model
how it expects to be driven instead of leaving the rules to be inferred from
per-tool descriptions.
initialize carries the instructions field that MCP 2025-06-18 defines, in
five sections: where host ids come from, which switch hides which tool, what
each error code implies for the next action, typical orchestrations, and
safety. Every statement was checked against the implementation rather than
derived from the tool descriptions, and four did not survive: the host_*
family only supports name/pid filters in part (named per tool now), read-only
mode does not hide host_set_remark and host_set_watch_level (they touch only
the local host store and are refused with -32006 when called), -32003 is one
lock keyed by device id rather than one per capability, and there is no
"screen stream" tool to pick instead of get_screenshot. The string is built
from u8 literals because the project compiles with /execution-charset:.936.
get_host_detail returns a capabilities object (platform, screenPreview,
remoteControl, fileTransferV2, c2cPaths, registry), each flag tied to a gate
that already exists in the dispatcher, so a model no longer discovers a
host's limits by calling and reading -32005. remoteControl mirrors the two
conditions remote_* actually applies (Windows or Linux, and not
multi-monitor), not the preview bit. Making the flags honest exposed
list_registry rejecting only LNX and MAC, so an APK host passed and then
waited out the timeout; it now uses the same is-Windows predicate the bit is
computed from. That predicate existed as identical local copies in
McpMachine.cpp and McpChat.cpp and now lives in McpInternal.
list_processes and list_windows take an optional name and pid, filtered on
the server before the page window is applied, with total counting matches
and totalAll still reporting the unfiltered count. The two tools get their
own schema builder so list_services does not advertise a filter it would
silently ignore, and the pid descriptions differ because a pid means the
process itself for one tool and its owner for the other.
get_keylog gains set_offline and clear, the two commands the client already
implements on the keyboard sub-connection but nothing on the MCP side ever
sent, plus offlineRecord from the ready packet's byte 1. Both writes are
gated on McpReadonly=0 and validated before COMMAND_KEYBOARD goes out, so a
refused call cannot leave a running keyboard session behind; the tool's
annotations change from read-only to writable and destructive, and the
server instructions gain the matching sentence.
Four capabilities are exposed twice through two different sub-connection
chains, so each pair's descriptions now say which one to reach for first and
when the other is the only option: the host_* trio carries more fields and
filters on the server, the list_* trio is the McpMachine=0 fallback, and
operate_window is the only one that can close a window. No tool was merged:
the split is what lets McpMachine be switched off on its own. search_file's
description drops the stale MAX_PATH-overflow warning (fixed in
|
||
|
|
4a3cded174 |
Docs: Plan the next MCP phase, with its claims checked against the code
Mcp_Next_Plan.md lays out what the MCP surface can still gain and how the
existing tools can be improved: a full client-command coverage matrix, a
file-system write batch, a remote-control gap, and a list of protocol-level
blanks. Every conclusion is tied to a file and line so the next step can be
implemented without re-deriving the analysis.
The first draft was written from a read of the code but not verified against
it. Auditing it turned up four claims that would have sent the work in the
wrong direction, and they are corrected here rather than left to be discovered
during implementation:
- The draft wanted a mode=offline for get_keylog because "the tool only sees a
1-15s live window". That premise is false. CKeyboardManager1 builds its
CircularBuffer from the on-disk record file, and SendData replays the whole
buffer from position zero on every (re)connect, so the existing tool already
returns the persisted history whenever kbrecord=Yes. What is actually missing
is only the on/off switch, the clear command, and reporting the state the
client already sends in TOKEN_KEYBOARD_START byte 1.
- Unlike P7, the file-write tools do not plug into OnSystemReady: their ready
packet is TOKEN_DRIVE_LIST, which lands in OnDriveList, where an empty path
is currently read as "list drives" and consumed. Worse, the three finish
tokens have no case at all in the top-level dispatch, so on the MCP path
(hDlg == NULL) they fall into default: and the sub-connection is never
closed. Appendix C now spells out the three wiring layers that every
sub-connection write tool has to touch.
- -32008 carries two meanings, not four: both remaining sites are argument
validation, and the multi-monitor rejection was already moved to -32005.
Dropping the proposed -32013 removes a whole error-code split.
- The draft put server gate state into get_host_detail, duplicating the
switches object that get_server_status already returns; monitors and most
per-host facts are already there too, so capabilities shrinks to the
client's own ability bits.
It also records what the audit added: delete_path inherits the client's
unbounded wsprintf when recursing (the search path got a length guard in
|
||
|
|
106ac2ff0f |
Fix: Resolve the Desktop, Downloads and home shortcuts on Unix clients
The file manager's remote shortcut buttons send "%USERPROFILE%\Desktop\" and friends, which the Windows client expands with ExpandEnvironmentStringsA. Unix clients had no such expansion, so the literal %USERPROFILE% was taken as a directory name: opendir() failed and the Desktop, Downloads and home buttons listed nothing at all. Add common/UnixPath.h, which expands the variables the server can send (%USERPROFILE%, %HOME%, %HOMEDRIVE%%HOMEPATH%, %USERNAME%) and maps $HOME/Desktop to the localized folder named in ~/.config/user-dirs.dirs (for example ~/桌面), falling back to the plain $HOME/<Name> path when that folder does not exist. Unknown %VAR% tokens are left untouched, so paths that really contain a percent sign behave as before. FileManager and the two Windows-to-Unix converters in FileTransferV2 now share that one conversion. Besides the listing itself, this fixes downloads into a shortcut directory, which used to be created under a literal %USERPROFILE% tree instead of the user's real desktop. Co-Authored-By: deepseek-flash |
||
|
|
6bfa4294cc |
Feature: Switch a Linux client's transport TLS at runtime
The server's TLS menu already wrote the trust anchor into the Windows client's registry and expected a restart. The Linux client grew the same command handling (166/167) but, like Windows, only read the anchor once at startup, so enabling or disabling TLS still meant restarting it. Both handlers now take effect immediately. TlsChannelLinux.cpp no longer initialises through std::call_once. The process-level state (context, enabled, load error) lives behind a mutex and TlsReload() rebuilds it from whatever anchor file is on disk, so TlsEnabled() reflects the new transport as soon as the anchor is written or removed. In-flight sessions survive the swap because SSL_new increments the SSL_CTX reference count; the unit test pins that down by keeping an established TLS connection open across a reload that frees the old context. A reload that hits a bad anchor keeps the previous state and only logs: one bad push should not brick a working client, and the next start is still fail-closed. The pushed PEM is parsed before it is written for the same reason -- a corrupt anchor on disk would lock the client out of the server with no way to correct it remotely. Only a real transport flip (plaintext <-> TLS) asks for a reconnect. An anchor swap alone, as in a certificate rotation, leaves the current session alone and applies to the next connection. The receive thread never closes the socket itself; it sets g_needReconnect and the main heartbeat loop disconnects so the outer reconnect loop can re-handshake, matching how the heartbeat timeout path already works. IOCPClient now latches the transport per connection (m_useTls) at handshake time instead of consulting TlsEnabled() on every send and receive. Without the latch, the second or so between the reload and the reconnect would push plaintext into an established TLS session, or the reverse, producing protocol errors for no reason. RES_TLS (szReserved[19]) is refreshed right before each login, including the resend after a group change, so the TLS column on the server flips with the transport instead of showing the value from process start. The confirmation dialogs now say what each platform does, with translations in en_US, zh_TW and de_DE; the keys carry the literal \n escape the INI parser understands. Ending a sub-connection is not an error. OpenSSL 3 classifies a peer that closes without close_notify as an unexpected-EOF protocol error, so every terminal or file transfer session logged an SSL_read failure on the real servers even though Recv promises 0 for a plain close and neither side sends close_notify. SSL_OP_IGNORE_UNEXPECTED_EOF restores the intended semantics. Verified with the reload unit test (RELOAD-OK, covering the in-flight connection across a context swap, garbage payload rejection and a broken anchor keeping TLS alive), an abrupt-close test (recv now returns 0 instead of SOCKET_ERROR) and end to end against a protocol-faithful fake server that signs MasterSettings with libsign: plaintext login, 166, TLS reconnect with RES_TLS=1, 167, plaintext reconnect with RES_TLS=0. The Linux client, the Debug Windows client and the Debug MFC server all build. The cost is inherent to taking effect immediately: a remote session in progress is dropped when the transport changes, and the MFC server briefly shows the client as a duplicate login until the old connection is reaped and the standby entry is promoted. Co-Authored-By: deepseek-flash Co-Authored-By: Claude Code <noreply@anthropic.com> |
||
|
|
c11df75225 |
Fix: Report the real runtime instead of a timezone skew in host info
The host info popup showed a constant "7h" runtime for every Linux host. szStartTime carries no timezone marker and the two sides disagree: the Windows client sends its own wall clock (client/LoginServer.cpp getProcessTime), while the Linux and Android clients send Beijing time unconditionally (linux/main.cpp and common/commands.h ToPekingTimeAsString hardcode UTC+8). GetElapsedTime then built the base time with CTime as local time and subtracted it from the local clock, so on any server that is not at UTC+8 the start time landed in the future; the absolute value turned that skew into a plausible-looking duration (UTC+1 gives exactly 7h). GetElapsedTime now picks the reference "now" by client type: LNX and APK are compared against the current Beijing time, everything else keeps using the local clock. A start time in the future now clamps to 0 instead of being mirrored, so a clock disagreement shows as unknown rather than as a fake runtime. The Linux client also reported the wrong thing entirely: it sent the current time at login, not the process start time, so the value was always about zero whenever the timezones happened to agree. It now records its own wall clock once at load and reports Beijing time built from it, matching the semantics of the Windows client. An upgrade forks a new process, so the counter restarts after an upgrade as expected. The first implementation read /proc/self/stat starttime plus /proc/stat btime, which looked like the exact equivalent of the Windows call, but btime is computed from the wall clock at boot and never corrected when NTP later steps the clock, so on WSL2 it drifted by 1.8h. Recording the value in the process itself has no such failure mode. Verified against a Debug server with a WSL Ubuntu 24.04 client and a Windows client: the popup now reports "2.3m" for a Linux process started 2.3 minutes earlier (previously 7h), the startup timestamp is the process load time in Beijing time, and the Windows host still reports 14s right after it connects. Co-Authored-By: deepseek-flash |
||
|
|
4d2abf34d0 |
Feature: Support the Tier 1 MCP tools on Linux clients
All of these tools already had a working wire protocol on the Linux
client (SystemManager.h, common/PTYHandler.h, ScreenHandler.h); only the
server-side client-type gates rejected LNX hosts. kill_process,
exec_command, terminal_open/exec/close and remote_open/close/mouse/
keyboard/clipboard now accept LNX and reject only MAC (plus APK where it
applied). No client change, no capability bit.
exec_command and terminal_exec needed platform-aware plumbing because a
POSIX shell understands none of the Windows constructs: the sentinel is
now "PS1=" / the command / "echo __MCP_DONE_<nonce>__$?" over the Linux
PTY, with output decoded as UTF-8. The PS1= line exists because
interactive bash prints its prompt after every line it reads, which
otherwise leaks into stdout; its echo sits ahead of the command echo and
is removed together with it. The Windows ConPTY and legacy non-PTY forms
are unchanged.
The default command whitelist is now platform-specific: identically named
POSIX commands can write files or change system state (find -exec,
sort -o, hostname), so kDefaultCmdWhitelistPosix only lists commands that
stay read-only even with arguments. env is deliberately excluded, since
"env <program>" runs arbitrary programs and would defeat the whitelist
entirely. An explicit McpCmdWhitelist still overrides both platforms. The
forbidden metacharacter set is split the same way: on Linux it covers
& | < > ; backtick and $( / ${ / !, where ! triggers history expansion in
interactive bash. ^ is not a POSIX metacharacter, so read-only commands
like "grep -v ^# /etc/hosts" are accepted on Linux while Windows keeps
rejecting them.
Input injection had to be sent one MSG64 per COMMAND_SCREEN_CONTROL
packet. The protocol allows batching and the Windows client handles it,
but linux/ScreenHandler.h only processes the first message of a packet,
so a batch left key_press stuck down (X11 autorepeat), click
half-pressed and type emitting only its first character. Splitting the
packets is equivalent for Windows, which processes one message at a time
anyway, and keeps already-deployed Linux clients working without an
upgrade.
Verified on a Debug server against a WSL Ubuntu 24.04 client and a
Windows client: exec_command returned real exit codes (0/1/2) with clean
output, -32007/-32008 negatives, and the POSIX-only ^ allowance;
persistent terminals kept cwd and environment, returned 1 for false and
the last exit code for ";" chains, and closed idempotently; kill_process
killed a test process, returned an empty remaining list and skipped
pid 1; remote_open reported 3840x1140, remote_mouse mapped (0.5,0.5) to
(1920,570), xev showed balanced press/release pairs for keys and buttons,
and a Chinese clipboard round-trip came back as UTF-8. The Windows
regression of the same tools was unchanged, including the multi-monitor
gate on remote_open.
Co-Authored-By: deepseek-flash
|
||
|
|
3a158a241c |
Feature: Support upload_file and download_file on Linux and macOS hosts
Both tools used to reject LNX/MAC targets outright. The server now gates on the target client type instead: a POSIX target must pass an absolute POSIX remote path without a backslash or a ".." segment (-32602 otherwise), while Windows targets keep their exact previous behaviour. upload_file needed no new client command; the POSIX receiver already handles COMMAND_SEND_FILE_V2 and derives the destination from the packet name. It now also reports a real receiver_ack: the upload session records dstClientID/transferID, and OnC2CRecvResult matches the 176 acknowledgement from Linux targets, so a destination write failure becomes -32011 and a missing ack (with bytes in flight) becomes -32001. download_file needed two pieces on the POSIX side, both shared by Linux and macOS through common/FileTransferV2.h: a FileCompletePacketV2 per file with a streaming SHA-256 (new self-contained common/sha256_posix.h, since BCrypt is Windows-only) so the server can count completed files and verify digests, and a TOKEN_DOWNLOAD_ERROR reply when the requested paths do not exist or are denied, which the server maps to -32009/-32010 within milliseconds instead of waiting for the stall watchdog. Zero-byte files were lost when uploading to POSIX targets because the worker sends no data chunk for them and the complete packet carries no path, so the receiver had nothing to create. The server now injects a zero-length final chunk for each empty file, only for POSIX targets; Windows targets keep their existing behaviour. Also fixes a download completion edge case found while testing: the client decides entry order, so a directory may arrive after all files (an empty subdirectory, for example), and the directory branch only completed when the directory count alone covered totalFiles. The check is now filesDone + directoryCount >= totalFiles. Verified end to end against a WSL Linux client and a Windows client: upload and download of a tree with a 3 MB binary, a Chinese filename, an empty file and an empty subdirectory all round-trip with matching SHA-256; the documented error paths (-32602, -32009, -32011, -32001) and the Windows upload/download/C2C regressions were exercised as well. Co-Authored-By: deepseek-flash |
||
|
|
4146c73657 |
Feature: Make Linux a copy_files_c2c destination
The C2C file transfer tool required both ends to be Windows clients. A Linux client can already land the files: the Windows source worker builds every entry name by plain string concatenation of dst_dir and the relative path, so a POSIX dst_dir such as /tmp/recv arrives as "/tmp/recv\sub\file", which the POSIX receiver normalizes to "/" and writes below an absolute path. What was missing was the server gate and any way to tell whether the writes succeeded. The server now accepts LNX/MAC destinations instead of rejecting them, and validates dst_dir by destination type: an absolute Windows path for Windows targets, an absolute POSIX path without backslashes for POSIX targets. The paths and dst_dir arguments also reject embedded NULs, and a POSIX dst_dir is converted to CP936 exactly so unencodable characters fail loudly instead of silently becoming '?'. To make receiver_ack meaningful, a Linux client that receives a C2C transfer now reports what it wrote. It tracks the outcome per transferID, counting a directory entry, the last chunk of a file and the completion packet of an empty file as the three ways an item is settled, with done sets so that source retries and the trailing completion packet never double count. When every item is settled it sends one C2CSendResultPacket back on its main connection under the new TOKEN_C2C_RECV_RESULT (176), with the first errno in the win32err field and the mapped FEV2_* status. A dedicated token is used instead of reusing 175 because a host can be the destination of one transfer while being the source of another, and a destination result must never latch the source side's done flag. The server waits up to five seconds for that acknowledgement after the source reports success, and only for destinations advertising the new CLIENT_CAP_C2C_RECV_ACK capability bit (Linux only, macOS reports nothing). A failed acknowledgement becomes -32011 with the status, errno and received file count; a missing acknowledgement stays an error only for transfers that actually moved bytes, since a transfer of empty files alone gives the receiver nothing to learn totalFiles from. Windows destinations are unchanged and skip the wait entirely. Verified on the debug instance: Windows to Linux (WSL Ubuntu 24.04) with subdirectories, an empty directory, a Chinese file name and a 3 MB binary lands with matching SHA-256 and receiver_ack true; a Windows-style dst_dir returns -32602; an unwritable POSIX destination returns -32011; the existing Windows to Windows cases still pass with receiver_ack false and the same latency. Co-Authored-By: deepseek-flash |
||
|
|
4c0e86dcc5 |
Feature: Upgrade a Linux client from the server
The Linux client is a standalone ELF with no in-memory loader and no COMMAND_UPDATE handler, so the server's upgrade menu silently did nothing for an LNX host. It can now push a new binary and have the client replace and restart itself. The server grows an LNX branch next to EXE/DLL/SC. It takes the ELF from an explicit settings.ini LinuxClientPath, then ghost_linux_amd64 in the program directory, then res\ghost_linux, then IDR_LINUX_GHOST, the copy the server has always embedded for the client-build dialog, so a server with nothing on disk can still upgrade; a configured path that cannot be read is an error rather than a silent fallback. Only x86_64 ELF64 is accepted. The payload adds a 32-byte MD5 trailer to the existing [cmd][size:8][payload] layout, which the Windows branches keep unchanged. linux/ghost in the tree is still the build from before this change and is not updated here. It has to be refreshed before release: the embedded default is copied from it at build time, and a stale copy would install a client with no COMMAND_UPDATE handler, which can never be upgraded remotely again. The client verifies the declared size, elf magic, e_machine against its own ELF header and the MD5 before touching anything, so a miscopied or corrupted file never lands on disk. It then writes a same-directory temp file with fsync and 0755 (a running executable cannot be truncated in place), renames it over its own path atomically, keeps the replaced inode as .old, removes the PID file, forks a detached child that waits for the old process to exit and execs the new binary with the original argv, and finally exits with S_CLIENT_UPDATE. Doing the rename and the exec in that order avoids ETXTBSY, double connections under one client id, and a new instance that isAlreadyRunning() would refuse to start. Any failure (unwritable install directory, bad payload, fork) leaves the client running on the old version; the reason goes to the client log and to the server's message log through TOKEN_CLIENT_MSG, which required moving that struct out of the Windows-only block in common/commands.h. The shared client source had also stopped compiling off Windows: the unknown-header diagnostic in IOCPClient::OnServerReceiving printed TlsEnabled() and m_tls.IsReady() unconditionally, but TlsChannel and m_tls only exist on Windows. That diagnostic now keeps the TLS details where the channel exists and prints just the buffer dump everywhere else. Verified end to end in WSL against the Debug server, foreground and -d daemon: the PID changes, the installed file matches the pushed MD5, the host reconnects, and ghost.old holds the previous binary. A read-only install directory reports "cannot create ...: Permission denied" in the server log with the client still online. With an invalid file at ghost_linux_amd64 the server refuses it and names that path, which shows the disk source wins; with nothing on disk the update goes through from the embedded ELF. Co-Authored-By: deepseek-flash |
||
|
|
bfb17d0d25 |
Feature: Draw the remote cursor in the web desktop out of control mode
Screen frames are captured without the pointer composed in (GDI SRCCOPY, DXGI), so browsers only ever knew the cursor's shape index and could show a cursor just in control mode, where the local pointer stands in for the remote one. Both servers now relay the cursor position that every per-frame header already carries: shape changes go out immediately, position changes at most every 50 ms, and an unchanged cursor is re-sent once a second so a viewer that joins while the pointer is idle still learns where it is. The page hides the local pointer and draws the remote cursor at its true position while out of control mode; entering control mode restores exactly the old behaviour (remote-shaped CSS cursor on desktop, touchpad pointer on touch). A server that never sends x/y leaves the page on its previous fallback. The C++ server broadcasts from the per-frame path, so header-only frames keep a static desktop's cursor fresh; the Go hub dedups and throttles before fanning out. Tests cover the throttle/refresh rules and the relayed payload. Co-Authored-By: deepseek-flash |
||
|
|
6236ed1eb4 |
Fix: Make the Go web console wheel scroll correctly
The Go web server's mouse handler read deltaY as an int, so json.Unmarshal rejected the entire mouse message whenever the browser reported a fractional delta (Chrome's smooth scrolling splits one 100px notch into 33.33 + 33.33 + 33.34), and the wheel was dead while clicks and moves kept working. Treating every event as one notch was wrong the other way: it scrolled three to four times too far, and sub-pixel deltas from a touchpad truncated to zero. The server now accumulates the delta in notch units per client and injects WM_MOUSEWHEEL only once a whole notch is reached. The remainder is rounded, not truncated, so a float sum of 99.99px still lands on exactly one notch and the first notch fires halfway through a physical one, like native scrolling. The page forwards e.deltaMode so line and page based deltas convert correctly, and touchpad flings are capped at 20 notches per event. Verified against a live Go server with a connected client: 100px sends one packet, three 33.33px events send one, 53.33px sends one, sub-pixel events accumulate to none, and the wParam is -120 down / +120 up with SendToScreen returning no error. The MFC web console is untouched. Co-Authored-By: deepseek-flash |
||
|
|
c271911fcb |
Feature: Add copy_files_c2c to transfer files between clients directly
Adds the 54th MCP tool, copy_files_c2c, which asks the source client to push a set of files straight to another online client. Previously the only way to move files between two clients was to download them to the server machine and upload them again, so the data crossed the wire twice and needed free disk on the server. With C2C the server only relays packets and never parses or stores the payload. Protocol. Two new ids in common/commands.h: COMMAND_C2C_SEND_FILES (174), carrying the destination directory followed by a NUL-separated path list, and TOKEN_C2C_SEND_RESULT (175), a fixed 45-byte result packet sent back over the same sub-connection the transfer used. Clients advertise support with the LOGIN_INFOR capability bit CLIENT_CAP_C2C_PATHS (0x0008), exposed server side as Context::SupportsC2CPaths(). File transfer V2 already knew how to push to dstClientID, so the destination side needed no change at all; existing V2 receive paths keep working, and older clients simply do not advertise the bit and are rejected with a clear error instead of hanging. Client. OnC2CSendFiles expands environment variables, collects directories recursively, opens its own sub-connection (with sub-connection auth), and runs FileBatchTransferWorkerV2 in a detached thread, then reports the result on that same connection. Every early exit now reports a structured failure rather than staying silent. The worker needs the process-level InitFileUpload call that the receive path performs lazily, and a source client may never have opened a file manager or received an upload, so the initialization is factored into EnsureV2TransferInited() and called from both paths. Server. copy_files_c2c mirrors the existing upload tool: gates, id parsing, capability checks, path validation, then a session keyed on the source host that WaitC2CDone polls until the result packet arrives. The C2C relay branch used to attach a CDlgFileSend progress dialog to the source's sub-connection; NotifyProc then routed every later packet on that connection to the dialog, which parsed the result packet as a V1 file chunk and dropped it, so the tool always timed out even though the files had arrived. IsC2CTransferPending() now suppresses dialog creation for MCP-driven transfers only, leaving manual Ctrl+V transfers untouched. Errors map to -32001 for a source-side transfer failure, -32010 for access denied, -32009 for a missing path and -32002 for an offline destination. Both hosts must be Windows: the destination is restricted too, because the source embeds dst_dir in each V2 chunk name as an absolute Windows path and only the Windows receiver applies it literally. A Linux or macOS receiver never gets a target directory here (the clipboard flow sets one with COMMAND_C2C_PREPARE, which this path does not send), so it would strip the drive letter and write under / instead. Supporting that needs a prepare packet carrying an explicit path plus an upgrade of those clients, so for now the tool rejects them with -32005 rather than writing somewhere wrong. Verified end to end on the Debug build: three files including a non-ASCII name, an empty directory and a 3 MB binary arrived with matching SHA-256 in 3.2 s, a non-existent destination directory was created, and the negative cases returned the documented codes. mcp_smoke.ps1 passes 41/41 with two new assertions and 27/27 in -SkipHost mode. Design notes, error table and limitations are in docs/Mcp_FileTransfer_Design.md section 14 and docs/Mcp_Design.md section 15. Co-Authored-By: deepseek-flash |
||
|
|
27d40f5678 |
Fix: Expose tool payloads in the content text block
List and query tools put only a human summary in content and kept the real payload in structuredContent. Clients that hand just content to the model (WorkBuddy does) therefore never saw a host id: search_hosts answered "1 host matched" and every follow-up tool was out of reach, and guessed ids 1-3100 could never work because host ids are 64-bit snowflake values. BuildResult now appends the serialized structuredContent as a second text block, as the MCP spec recommends for tools with structured output. The append sits in the single result choke point, so every tool in McpServer, McpMachine and McpChat gains it, including future ones; empty action results such as remote_mouse keep their bare "ok". Tools whose text already carries the payload expose only the difference: exec_command and terminal_exec add exit_code, get_keylog adds counters, get_activity_history exposes records without the duplicated raw dump, and the hosts file reader drops its copy of the content. The override rides in a $ key that BuildResult consumes and removes, so responses change only by the extra block. Verified on a Debug instance: list_all_hosts, search_hosts, get_server_status and list_registry return parseable JSON in content[1] with ids intact, and tools/mcp_smoke.ps1 -SkipHost passes 27/27 with four new assertions. Co-Authored-By: deepseek-flash |
||
|
|
a7dd86ff0f |
Feature: Terminate TLS for the MCP endpoint inside YAMA
MCP was served by a plain httplib::Server, so remote clients could only use cleartext HTTP. YAMA now terminates TLS itself: a small front-end owns the MCP port, sniffs the first byte and either runs a Schannel handshake and forwards the decrypted bytes or passes plaintext through, with httplib moving to a loopback-only internal port. No OpenSSL, no frp change, existing local HTTP clients keep working, and an unusable certificate fails closed instead of falling back to cleartext. The identity loader grew the two things a public certificate needs. ECDSA (P-256/P-384/P-521) keys are persisted by importing PKCS#8 with an NCRYPTBUFFER_PKCS_KEY_NAME parameter, the only route MS Software KSP supports for Schannel; RSA keeps its old export-and-repersist path. Fullchains are accepted, and the intermediates are added to the current user's CA store so Schannel, which builds chains only from system stores, actually sends them. The shared handshake also now buffers a full TLS record before the first AcceptSecurityContext, which a partial ClientHello would otherwise poison (SEC_E_UNKNOWN_CREDENTIALS). Session resumption exposed a second trap: when a client resumes a session, ChangeCipherSpec, Finished and the first application record arrive in one segment and AcceptSecurityContext leaves the application record pending in the session. Nothing drained it, because both callers only decrypt when new ciphertext arrives, so the request waited until the peer gave up (the MCP front-end saw no request at all and the client reported "fetch failed (other side closed)"; the device port had the same hole behind its occasional login timeouts). Decrypt now drains pending data on len == 0, and both the front-end and the device port's handshake thread use it before entering their receive loops. Configuration is McpHttps, McpCertPath, McpKeyPath and McpInternalPort, the first three editable in the MCP settings dialog (the certificate rows stay greyed out until HTTPS is enabled and saving rejects missing files). Verified with a real Let's Encrypt ECDSA fullchain (53 tools over TLS, 401 with no or bad token), a local three-level chain whose intermediate was absent from the store, Node 24's fetch on a resumed session (initialize, notifications/initialized and tools/list all complete), and the device port's RSA handshake as a regression check. Details in docs/Mcp_Design.md section 13. Co-Authored-By: deepseek-flash |
||
|
|
b4cb34fea9 |
Fix: Stop MCP tool timeouts from popping MFC dialogs
A sub-connection's first packet doubles as the readiness packet: the file, service, registry, process, log and terminal tools all get answered that way. Once a tool has given up (timeout or failure) its pending entry is gone, so if the client only gets around to sending that first packet afterwards, MessageHandle cannot tell it apart from a human click and opens the matching modeless dialog - a File Manager window appeared while timeouts were being exercised on this machine. The wait paths now record, per device, which first-packet token the abandoned tool would have sent (MarkLateFirstPacketForTool from WaitPending, WaitPendingRegistry, WaitPendingWrite, WaitFileTransferDone and WaitTerminalReady), and every dialog-opening case consumes that marker before falling back to the MFC path. The marker is one-shot, expires after five minutes and is never set on the success path, so normal use is unaffected; the worst case is that a single manual open on a host that just had an MCP timeout is swallowed. ClientMsg packets are dropped with a log line while a tool is pending for that host: new clients still send the legacy popup message alongside the structured failure token, which would otherwise put a modal box on the server UI during an MCP call. Co-Authored-By: deepseek-flash |
||
|
|
1456882f16 |
Docs: Record the structured failure protocol and -32010
Spell out the new token layout and who sends it, add -32010 to the error table, and narrow -32008 to parameter validation now that capability limits report -32005. Document McpToolTimeoutMs as an ini-only key and correct the note about where the list_files 500-entry cap is applied. Update the remote-control design and the test report so P2, P6 and P8 show as fixed with the measured evidence. Co-Authored-By: deepseek-flash |
||
|
|
3b1626f415 |
Feature: Turn client failure reports into branchable MCP errors
Wire the four new failure tokens into MessageHandle and translate them in the tool builders, so the three previously silent failures now return a code an agent can branch on: list_services on a non-elevated client is -32010 in well under a second instead of a 20 s timeout, list_files and list_registry distinguish a missing path or key (-32009) from an empty one, and download_file no longer waits for the stall watchdog when the remote path does not exist. Access denied gets its own code, -32010, and the win32 code is kept in the message for every case. TakeRegError fills both registry wait flags in one packet because a failing client sends no subkey or value packet at all. OnDownloadError sets the session error without cancelling the file-manager sub-connection, which stays owned by ClearFileTransfer. ListRemoteTopLevelNames treats "not found" as "directory not created yet" so uploading into a fresh directory keeps working now that the client reports it. Also converge the error codes that were overloaded: a multi-monitor host is a capability limit, not a parameter mistake, so remote_open reports -32005 instead of -32008. The tool wait timeout moves from a compile-time constant to McpToolTimeoutMs in settings.ini (default 20000, clamped to 1-600 s), which makes it possible to tune without a rebuild. The smoke test gains the three reproducible negatives. Co-Authored-By: deepseek-flash |
||
|
|
315a0855dc |
Feature: Let the client report structured failures for MCP tools
Four new client-to-server tokens carry a win32/LSTATUS code when a command fails instead of returning empty data: TOKEN_SERVICE_ERROR (170), TOKEN_FILE_LIST_ERROR (171), TOKEN_REG_ERROR (172) and TOKEN_DOWNLOAD_ERROR (173). They sit on byte values that were unused, so existing numbering is untouched. The three data paths that used to collapse "failed" and "empty" into the same packet now distinguish them: OpenSCManager failures, directory enumeration failures and RegOpenKeyEx failures all report the code that was actually returned, and UploadToRemoteV2 reports why it found no file to transfer before the transfer sub-connection is ever created. Every failure branch still sends the packet the old server expects (TOKEN_FILE_LIST, the empty TOKEN_REG_PATH/KEY pair, the ClientMsg popup), so a new client talking to an old server degrades to exactly today's behaviour instead of timing out. Success paths are byte-for- byte unchanged. Co-Authored-By: deepseek-flash |
||
|
|
eaa10cc7d3 |
Fix: Make the MCP command sentinel robust and fail stalled downloads fast
Re-verified every finding of the 2026-10-25 MCP test report against the source and then end-to-end on the Debug instance, and fixed the ones that live on the server. P1/P3/P4 share one root cause: the sentinel was appended to the command line, so any command that swallows the rest of its line (rem, cmd /c, if, for) swallowed the sentinel too and the call always timed out. On ConPTY clients the command and the sentinel are now sent as two lines, the sentinel prints %errorlevel% (whose echoed text is a literal template, not digits) so folding echo can no longer be mistaken for the sentinel, and FindSentinel returns the real exit code (9009, 1, 0, ...) instead of 0/1. Old non-PTY clients keep the single-line form, since their echo skipping depends on the write length. ConPTY also returns a rendered screen stream rather than a byte stream, so stripped VT sequences leave duplicate text behind; output cleaning now cuts through the echoed command line, strips the echoed sentinel line and erases any leftover sentinel text by its per-command nonce. StripAnsi no longer leaves the backslash of an OSC terminated by ST. A terminal session destroyed by a timeout used to report the same "not found" text as a typo in the session id; a 600s tombstone now says what happened instead. download_file gets a stall watchdog: no data for 60s fails with a clear message and releases the host, where a missing remote path used to hold the whole host for the full 600s default timeout. Also corrects the get_activity_history annotation (it does reach the remote host), completes the -32007/-32008/-32009 error table, documents the sentinel design in Mcp_Design.md 12.1, and corrects the report's claim that the tools blocked during a transfer are local DB reads -- they are remote machine-manager fetches, and purely server-local tools are unaffected. Co-Authored-By: deepseek-flash |
||
|
|
1c5fab1645 |
Fix: Stop the client dropping chat messages that begin with e
CChatManager::OnReceive opened with the same heartbeat guard the other managers use, `if (szBuffer[0] == TOKEN_HEARTBEAT) return;`, before it looked at the length. TOKEN_HEARTBEAT is 101, which is also the letter e, and this channel carries free text rather than command bytes, so every message starting with e -- "echo", "error", anything -- was silently discarded. The sender never learned: the server's chat dialog had already written the text into its own log, so the two sides disagreed about what was said. The guard is dead code here. Heartbeats travel on the main connection only, as a multi-byte [101][Heartbeat] packet consumed by the main dispatcher; the server never sends one on a chat sub-connection. Delete it and keep the length check that follows. The server keeps prepending a space when the GBK payload starts with 101, because already-deployed clients still carry the guard and losing the message outright is worse than an invisible leading space. Note the same guard, harmless today, still sits in the machine, file, proxy and screen-hide managers. Verified with the Debug instance and a local Debug client: with the server's space temporarily disabled, chat_send "echo test" and "second line" both showed up verbatim in the client dialog (read back with WM_GETTEXT); with the space restored the first arrives as " echo test". Details in docs/Mcp_Chat_Design.md section 5. Co-Authored-By: deepseek-flash |
||
|
|
cc3e11d30d |
Improve: Cover protocol and policy error codes in the MCP smoke test
The suite only exercised the happy paths, so a regression in the negative paths -- unknown method, unknown tool, a missing required argument, an oversized batch or a policy refusal -- would have gone unnoticed. Add those checks alongside a section that reads the switches from get_server_status, picks a feature that is actually turned off and asserts its tool answers -32006; with every switch on it skips rather than guessing, and with -AuditLog it also asserts the refusal shows up as CALL_DENIED. Document the full error-code table in section 12, including which codes mean "retry with different arguments" and which mean "this is a policy decision, retrying is pointless", and note that a batch call never fails as a whole for per-host errors. Verified against the Debug instance with McpKeylog temporarily set to zero: get_keylog refused with -32006 and the audit log gained the matching CALL_DENIED line, 34 checks passing; with the switch restored 32 pass, and 37 with a search path. Co-Authored-By: deepseek-flash |
||
|
|
7c5bf3e73d |
Feature: Filter search_file results by size, mtime and slim fields
Add four optional arguments to search_file that narrow the match list after the client has returned it: min_size and max_size in bytes, modified_after in either YYYY-MM-DD or YYYY-MM-DD HH:MM:SS form, and name_only to keep just path and name per entry. The client still runs the same name-matched recursive search, so these filters cut the response size and the reasoning work on our side, not the scan time on the host -- the summary sentence says so and totalAll keeps the pre-filter count so a too-narrow condition is obvious. Invalid values (negative sizes, an inverted range, a malformed timestamp) are rejected with -32602 before any packet goes out. The timestamp validator only accepted the ten-character form because its shape loop never allowed the two colons, which rejected every nineteen-character value; the loop now whitelists them. Smoke tests cover the unchanged totalAll under a size filter, the slim name_only payload and a rejected timestamp, for 33 checks when the search path is supplied. Design notes are in section 11.4. Co-Authored-By: deepseek-flash |
||
|
|
929065e7be |
Feature: Filter the MCP host lists by group, OS and client type
list_online_hosts and list_all_hosts could only page, so finding "the hosts in this group" or "the Linux ones" meant walking pages or falling back to search_hosts, which has no client type filter and treats online and offline hosts differently. Both tools now accept group, os and client_type. They are substring matches, combined with AND and case-insensitive over ASCII, matching the semantics search_hosts already used, and the shared implementation keeps the two tools from drifting apart. The filter runs before paging, so total counts the matches and totalAll keeps the pre-filter size, and the summary switches to the "matches" wording with a trailing line naming the unfiltered size - a mistyped condition then shows up immediately instead of silently returning nothing. Offline hosts carry no clientType in their stored record, so a client_type filter never matches them; the tool description says so and points at os for that case. Verified on the Debug instance: client_type=exe matches the single EXE host while client_type=lnx matches nothing and still reports totalAll=1; list_all_hosts with group=default matches all 3161 recorded hosts and splits them into 1 online and 3160 offline, and os=zzz matches none. The smoke test gains two checks and passes 28/28. Co-Authored-By: deepseek-flash |
||
|
|
5ce453797c |
Feature: Add a get_server_status tool to the MCP server
Answering "did my rebuild actually take effect" or "why was that tool refused" used to mean reading list_online_hosts and get_audit_log and inferring the rest. A single read-only call now returns the server's own state: brand and version, the exe link time (taken from the file's last write, which unlike __DATE__ reflects the whole build), how long the process has been up, the address and port MCP is actually listening on, every MCP switch, online and offline host counts, the number of sessions in flight per family, and how many source IPs are currently blocked. The bind and port are recorded by Start rather than re-read from the configuration, so the tool reports what the listener really got. Session counters take each subsystem's lock in turn and release it immediately, so the numbers are an estimate of one moment, not a consistent snapshot. Nothing sensitive is exposed: the token and the command whitelist never appear, and the switches are reported as booleans only. The tool is registered as read-only, non-destructive, idempotent and server-local, which brings tools/list to 53 entries. The smoke test gains three checks for it, including one that fails if a token-shaped field ever appears in the output. Verified on the Debug instance: the summary line reports version, uptime and listener correctly, sessions.terminal goes 0 to 1 while a persistent terminal is open and back to 0 after terminal_close, and the smoke test passes 26/26. Co-Authored-By: deepseek-flash |
||
|
|
ae37e812ee |
Feature: Page and filter the MCP audit log tool
get_audit_log used to hand back every entry in the main window's message mirror on each call. The mirror is a 1000-entry ring buffer, so a busy server returned a lot of text the caller never looked at, and there was no way to ask for just the MCP entries or just the ones mentioning a particular subject. The tool now takes the same limit/offset pair as the other list tools and two optional substring filters: type matches the type column and keyword matches the message text, both case-insensitive. Filtering runs before paging, so total counts the matches while totalAll keeps the size of the whole mirror, and the summary line adds the pre-filter count when a filter is in use so a typo is easy to spot. The GBK to UTF-8 conversion moved into the filter loop so the comparison happens between strings in the same encoding, still under the dialog's critical section. The output schema gains total/totalAll/offset/limit/hasMore, and the smoke test now asserts the paging fields, the limit bound and an empty result for a filter that cannot match, bringing it to 23 checks. Verified on the Debug instance: limit=2 returns entries 1-2 then 3-4 with hasMore set, offset=999 reports the out-of-range text, type=mcp matches the "MCP命令执行" entry, type=提示 matches both hint types and keyword=监听 matches the listening-port line. Co-Authored-By: deepseek-flash |
||
|
|
d9a1a9ebcb |
Fix: Record policy refusals in the MCP audit log
Every policy denial - read-only mode, one of the Mcp* switches turned
off, or a host that lacks the required capability - answers -32006. The
audit log only ever showed CALL_FAIL for those, which lumped them
together with parameter errors, offline hosts and timeouts, so after the
fact there was no way to tell "nobody called this" from "it was blocked
by policy".
The hooks all live in one place: the tools/call exit in the HTTP
handler now also reads error.code and error.message from the response it
already parses, and appends a CALL_DENIED event when the code is -32006.
The original CALL_FAIL line is still written, so its statistics keep
their old meaning, and the reason text is the fixed English sentence
each branch already returns - no tool arguments or user input reach the
log. Tool names taken from the request are flattened to a single line
first, both in the denied event and in the existing CALL_OK/CALL_FAIL
lines, so a crafted name cannot forge extra audit rows.
Also refresh the stale note in the design document that still called the
client search MAX_PATH overflow unfixed; the source was fixed in
|
||
|
|
16f23e164c |
Fix: Clear the file transfer session when its sub-connection drops
A file transfer session holds raw pointers to its file-manager and stream sub-connections, but nothing on the offline path looked at them. OfflineProc cleans up terminal, remote-control and chat sessions and skipped file transfers entirely, so a client that disconnected in the middle of a transfer left the session pointing at a context that went back to the connection pool. When the tool thread timed out it called CancelIO on that stale pointer, which could cancel somebody else's connection. Add a context-to-device table next to the sessions, kept under the same mutex and erased by ClearFileTransfer so a recycled pointer is never mistaken for a live one. OfflineProc now calls OnFileTransferContextClosed, which drops both pointers. A dropped stream sub-connection means the transfer cannot complete, so it also fails the session with error 1003 and wakes the waiting thread; the file-manager sub-connection only issues the command and its loss is not treated as a failure of the transfer itself. Verified against the debug client: killing it 1.2 s into a 500 MB download returns "Connection lost: the transfer sub-connection closed" after about 1 s instead of waiting out timeout_ms, and the server stays up. After the client restarts, two consecutive downloads and one upload still work. Co-Authored-By: deepseek-flash |
||
|
|
39f0928de7 |
Fix: Finish a directory-only download instead of waiting for the timeout
The completion check compared filesDone against totalFiles minus directoryCount and only ran on COMMAND_FILE_COMPLETE_V2. The client sends no COMPLETE for directory entries, so a download of an empty directory, or of a tree that holds only subdirectories, had zero expected files and could never satisfy the check. The call sat there until timeout_ms expired (600 s by default) and then reported 1002. Mark the session done as soon as the directory entries account for every entry the client declared. Verified with the debug client: an empty directory returns in 0.2 s with zero files, a tree of nested subdirectories returns in 0.2 s with the directories created, and a directory holding three files still downloads them with the same sizes and hashes as before. Co-Authored-By: deepseek-flash |
||
|
|
8f718d9b39 |
Fix: Stop the client file search from overflowing its path buffers
SearchFilesRecursive built "%s\*.*" and "%s\%s" with wsprintf into char[MAX_PATH] buffers and never checked the lengths. The recursion allows 32 levels, so a search from a drive root accumulates paths well past 260 characters and writes off the end of the stack frame. Debug builds raise Run-Time Check Failure #2 and the dialog blocks the search thread; release builds corrupt the stack silently. Check the length before each build and skip the entry when the full path does not fit, so neither the name nor the recursion below it is recorded. The root directory is checked once at function entry, which also stops an over-long root from being enumerated at all. Apply the same guard to the directory listing paths in both file managers, and bound the search pattern built from the incoming keyword. Zero-initialize the buffers filled by ExpandEnvironmentStringsA so a failed expansion is treated as an empty path instead of reading uninitialized stack. Verified against the debug client with a full C:\ scan (10,000 results, finished, no dialog) and a repeated deep search afterwards. Co-Authored-By: deepseek-flash |
||
|
|
abe7e99a77 |
Feature: Harden the MCP transport and add non-destructive host tools
Cap MCP request bodies at 2 MB, set a 15 s idle read timeout and a 60 s
write timeout, and give httplib an explicit 32-thread pool: long tools
such as chat_wait hold a worker for up to 55 s, and the default pool of
8 to 15 left other callers queued.
Every tool returned by tools/list now carries readOnlyHint,
destructiveHint, idempotentHint and openWorldHint. The table is
per-tool; anything not registered defaults to destructive so a new
write tool cannot silently look harmless. Read-only tools are forced
to destructiveHint=false.
get_host_detail appends the technical fields the host store already
holds (cpuCores, memoryGB, systemBits, programBits, user, isAdmin,
installTime, expiredDate, monitors, exeVersion, clientPath, pid,
publicIp). The JSON writer is pinned to 15 significant digits so
memoryGB renders as 27.8 instead of 27.800000000000001. list hosts
output is unchanged.
Add host_set_remark and host_set_watch_level. Both validate the host
against the store, are refused in readonly mode, repaint the affected
row, and are audited without recording the value written.
Add search_file, which drives the client file-manager search channel
and returns paged results. The root path is normalized before sending:
the client enumerates with wsprintf("%s\*.*"), so a trailing
backslash produced C:\*.* and FindFirstFile failed, returning zero
hits instantly. The client only searches recursively, so non-recursive
requests are filtered server-side by comparing the parent directory.
Collection stops at 5000 records or 4 MB and the client is told to
stop; on timeout the partial results are returned. Search result
packets are never closed early: the sub-connection stays open until
TOKEN_SEARCH_FILE_FINISH, because the client's search thread holds a
pointer into the file manager object.
Batch reads report a skipped counter and are bounded to 50 ids and a
50 s deadline.
Add tools/mcp_smoke.ps1, a read-only end-to-end smoke test that asserts
auth rejection, the payload limit, annotation coverage, paging fields
and the main read tools. It takes the token from the environment and
never prints it.
Document all of the above in docs/Mcp_Design.md section 10, including
the client-side MAX_PATH stack overflow that a deep search_file call
can trigger, together with the workaround of searching shallow
directories.
Co-Authored-By: deepseek-flash
|
||
|
|
ac5b174b5f |
Feature: Add offline hosts, batch reads and MCP hardening
Expose hosts the server already knows about. list_all_hosts enumerates both live contexts and the historical records in the client list, with authStatus as a three-state string instead of a boolean. search_hosts now honours online=false instead of returning an empty list, while the default stays online-only so existing callers see the same results. get_host_detail falls back to the last known record for an offline host rather than failing with -32002. Let read-only tools take an ids array of up to 50 hosts in one call. The batch path reuses the single-host dispatcher and pages per host, so behaviour cannot drift; write tools reject ids with -32602 so a mistake cannot fan out across machines. Add get_keylog behind its own McpKeylog switch. It drives the client's existing keylogger sub-connection, accumulates the streamed text for a bounded window and byte cap, then closes the sub-connection and returns UTF-8 lines. The client pushes its buffered history first, so a result contains both history and fresh keystrokes; the tool description says so. Harden the endpoint. Failed bearer checks are counted per source IP and ten failures within a minute block the IP for fifteen minutes. Auth failures and tool calls append to logs\mcp_audit.log with metadata only: no token, no arguments, no response bodies, and rotation at 5 MB. Loopback sources are audited but never blocked, because the built-in frp tunnel makes every remote request arrive from 127.0.0.1 and banning that address would lock out legitimate clients along with the attacker. Give list-style tools one pagination contract (limit/offset plus total/totalAll/hasMore) and fix the generated schemas so id and ids are genuine alternatives: the stale required:[id] left over from the single-host schema would otherwise reject ids-only calls. Co-Authored-By: deepseek-flash |
||
|
|
cc0e4bbd7a |
Fix: Pass win keys down the hook chain while a chat is locked
During a locked chat the client installs a WH_KEYBOARD_LL hook that swallows Alt+Tab, Alt+F4, Alt+Esc, Ctrl+Esc and the Win keys, so the person sitting at the machine cannot get out of the lock. The hook returned 1 without calling CallNextHookEx. Low-level hooks run last installed first, and this one is installed later than the server's hotkey forwarding hook, so it sits in front of it: returning 1 ended the chain and the forwarding hook never saw those keys. With YAMA running on the same machine as the client, Win shortcuts stopped reaching the remote host for as long as the lock was up. The event is now passed down the chain before it is swallowed. CallNextHookEx hands the event to the other hooks only, not to the system or the shell, so the local shell is still blocked and the lock behaves exactly as before, while the forwarding hook can see the key and act on it. Co-Authored-By: deepseek-flash |
||
|
|
73aa2725b9 |
Fix: Pick an MSBuild instance that has ATL, not the first found
build.ps1 took the first MSBuild.exe matching a hardcoded glob under %ProgramFiles% / %ProgramFiles(x86)%. On a machine that has both a command-line build tools instance and an IDE, that is the build tools one. It ships the v142 compiler, but ATL is a separate optional component there, so the link step failed with LNK1104 on atls.lib while the same sources built cleanly in the IDE whose instance carries ATL. The vswhere lookup meant to cover installations on other drives never ran, because the glob had already matched. Candidates are now validated against VC\Tools\MSVC\*\atlmfc\lib\x86\atls.lib before being accepted, every rejected instance is reported, and the vswhere lookup enumerates all instances and applies the same check, so an installation on another drive is found as well. When no instance carries ATL the first candidate is still used, with a warning, which keeps the previous behaviour and lets MSBuild emit the more specific error. The script is also saved as UTF-8 with BOM: Windows PowerShell 5.1 reads a BOM-less UTF-8 script as ANSI, which turns some Chinese comment characters into a trailing backtick and swallows the following line. This commit also carries the pending build script work: the Go server builder, the -ClientOnly fast path, and the serverd / client debug presets in build.cmd. Skills.md documents the two new presets. Co-Authored-By: deepseek-flash |
||
|
|
37d0297f07 |
Fix: Keep the keylogger thread pumping so the hook chain stays alive
The low-level keyboard hook callback runs only while the thread that installed it pumps messages, but KeyLogger() gated PeekMessage on IsConnected(). With offline recording enabled (kbrecord=Yes) and no keyboard sub-connection, the hook stayed installed while its thread never pumped, so every keystroke on the machine stalled against LowLevelHooksTimeout (300 ms by default) and the hook was eventually dropped by the system. Because the client installs its hook after YAMA installs its own, the client's hook sits in front of YAMA's in the chain, and the starved events broke the key pairs YAMA needs: Win shortcuts and Ctrl+V forwarding stopped working while ordinary typing was unaffected. Pump messages unconditionally; this code is only reached while the hook is installed, and the offline-record path installs it even without a keyboard sub-connection. Co-Authored-By: deepseek-flash |
||
|
|
7160ea8f42 |
Fix: Stop the online-host list header from flickering
The list header is a child window of the list view, and LVS_EX_DOUBLEBUFFER only covers the item area. The list view was created without WS_CLIPCHILDREN, so every whole-list Invalidate or RedrawWindow also erased the header with the class background brush before repainting it. On top of that, AdjustColumnWidths ran on every WM_SIZE and issued an unconditional SetColumnWidth per column, and each call repaints the header. The result was an occasional one-frame blink of the header row: irregular, low frequency, and confined to the header because the item area is double-buffered. Both lists now carry WS_CLIPCHILDREN, RDW_ALLCHILDREN was dropped from the redraw calls that only need the list body (that flag forces child repaints even when they are clipped), and column widths are only set when they actually change. The header still needs its background erase, but only for the strip to the right of the last column: AdjustColumnWidths reserves 20px there and the header's own paint stops at the last column, so that strip is colored by WM_ERASEBKGND alone. Skipping the erase entirely left it black after a minimize/restore cycle, when the window contents are discarded. The header subclass now fills just that strip with COLOR_3DFACE and leaves the column area untouched, which keeps the flicker fix, and the needRefresh branch of OnSize forces an erase-redraw of the header so the strip is repainted on minimize/restore and maximize/normalize. Verified with a standalone probe that mirrors the list setup for the header erase counts, and by rebuilding the app and checking the minimize/restore case reported against the first version of this change. Co-Authored-By: deepseek-flash |
||
|
|
434812f87d |
Fix: Show the instant-message popup on packed clients
Clients packaged as SC_AES/sRDI shellcode run the payload image as raw shellcode inside the loader stub, so the instant-message manager was handed the stub's module handle. The stub's resource section carries no IDD_DIALOG, and Windows rejects resource APIs on manually mapped images, so DialogBoxParamA failed (error 1812 on Windows 11) and the bottom-right popup never appeared after the operator sent a message. The popup now falls back to an embedded compiled dialog template generated from the IDD_DIALOG block in Script.rc and verified byte-for-byte against the resource in the built ghost.exe. When the resource lookup fails, the dialog is created with DialogBoxIndirectParamA instead. Deployments where the resource lookup already works keep the original path unchanged. The incoming text is now terminated at the copied length. The server sends the message body without a trailing NUL, so a message that filled the 1024-byte buffer left SetDlgItemText reading past the end. The title is now set with SetWindowTextW before the window is shown. DialogBoxParamA converts the template's UTF-16 caption through the system ANSI code page, so the Chinese title turned into "???" on 1252 systems (verified locally with a caption containing a character outside CP936). The title follows the UI language: Chinese systems keep the Chinese title, everything else shows "Message". The message body still uses the ANSI path, preserving the existing per-ACP semantics. Co-Authored-By: deepseek-flash |
||
|
|
c99a1c375e |
Feature: Add MCP tools for remote chat with the client user
Add chat_open, chat_send, chat_wait and chat_close to the MCP tool set, behind a new McpChat switch that defaults to off and is independent of the read-only switch. The tools reuse the existing client chat link: the main connection sends COMMAND_CHAT, the client opens a sub-connection with TOKEN_CONN_AUTH and TOKEN_CHAT_START, the server answers with COMMAND_NEXT_CHAT, and both directions then carry raw CP936 text. Sessions are per host and held in shared pointers under their own mutex, so a waiting chat_wait survives a close or a dropped sub-connection, and chat_send is serialised per session. Text is converted strictly between UTF-8 and CP936: invalid UTF-8, characters GBK cannot represent (emoji, accented letters) and messages over the client's 4000-byte buffer are rejected with -32602 instead of being mangled. A one-second settle delay after the sub-connection binds keeps the first message from reaching the client before its chat window exists. The routing hooks run before the host-management hooks in MessageHandle and clear the route in OfflineProc before the context leaves the list. A five-second tombstone absorbs a late TOKEN_CHAT_START after a timeout, so a failed chat_open does not pop the MFC chat dialog. Idle sessions are swept on every tool call, and audit entries record the session id and byte counts only, never message bodies. The settings dialog gains the chat checkbox and the translated labels for all three languages, and the strict UTF-8 to CP936 helpers move from McpMachine.cpp to McpInternal so both tool families can share them. Co-Authored-By: deepseek-flash |
||
|
|
fff7c67af6 |
Fix: Make the remote chat dialog Unicode and loader-independent
Clients packaged as SC_AES/sRDI shellcode run the payload image as raw shellcode inside the loader stub, so the chat manager was handed the stub's module handle. The stub's resource section only carries a manifest, and Windows resource APIs reject manually mapped images outright, so creating IDD_CHAT failed and the chat thread exited before the window ever existed. The chat window now falls back to an embedded compiled dialog template that is byte-identical to the IDD_CHAT resource, and the title-bar icon is rebuilt directly from the module's own resource directory instead of LoadIcon, bypassing the loader on both paths. The PE walking code checks every offset against SizeOfImage and the resource directory size, so a malformed or truncated image returns NULL instead of faulting. Deployments where the resource lookup already works keep the original code path unchanged. The dialog is now created and driven with the wide-character API. The client is still an MBCS build, but an ANSI dialog renders text with the system code page, so GBK chat text turned into mojibake on German and other non-936 systems. Incoming text is converted CP936 to UTF-16 and outgoing text strictly back to CP936; characters GBK cannot represent (emoji, accented letters) are refused with a visible notice instead of silently becoming '?'. Static labels follow the system UI language, and IDD_CHAT now uses the scalable MS Shell Dlg face so font linking can supply CJK glyphs. The window is now positioned explicitly as well. DS_CENTER in the template put it at the work area origin on the three-monitor host: the centred position came out negative there and Windows clamps out-of-range creation coordinates to that origin. It is centred in the work area of the monitor under the cursor instead, falling back to SPI_GETWORKAREA. Teardown no longer leaves a hidden window behind either. The dialog thread blocked in GetMessageW and never saw m_bRun cleared, while the destructor waited for that thread before sending the message that would have destroyed the window, so a close command that never arrived (the sub-connection already gone, or WaitSendIdle timing out before CancelIO) leaked the window, the dialog thread and the manager loop. The destructor now destroys the window first, the loop checks m_bRun before blocking, and it destroys the window itself if it exits first. Co-Authored-By: deepseek-flash |
||
|
|
3ae6298746 |
Fix: Align macOS mouse coordinates with the captured display
The macOS client derived its logical screen size from [NSScreen mainScreen] while it captured CGMainDisplayID. In clamshell mode with an external display the former can still report the disabled built-in panel (1470x956) while the captured frame is 1280x1024, so every injected point was scaled by logical/encode and drifted linearly with the distance from the top left corner, independently on each axis. Take the logical size from CGDisplayBounds of the captured display instead, and report the same bounds in the login resolution. For hosts that still run the old client, the remote desktop dialog gains a per-host mouse calibration in its system menu. The factors are stored by client ID together with the reported resolution and the captured frame size, so they stop applying once the client is upgraded or a different display is captured, and come back automatically when the original display returns. When no calibration has been saved the dialog pre-fills the factors from frame/reported, but only for macOS clients, because the other clients derive their conversion from the captured display itself and a mismatching report there would be misleading. Co-Authored-By: deepseek-flash |
||
|
|
38cd207f5d |
Feature: Add host management and connection management MCP tools
Expose the online-list TLS column through list_online_hosts, search_hosts and get_host_detail. The value comes from the flag the client reports at login, so old clients always read false. Add list_network_connections and kill_network_connection on top of the connection manager sub-connection protocol. The kill path matches the original 110-byte record instead of rebuilding addresses, supports a dry run, refuses UDP/IPv6 targets, and verifies that the quadruple really disappeared instead of assuming success. Add a host_* family backed by the machine manager protocol: ten read tools covering every tab of the host management dialog, and four recoverable write tools for process freeze/thaw, window restore/hide/ maximize/minimize, service start/stop/pause/continue/restart, and scheduled task run/stop. Every write re-reads the snapshot before sending and re-checks afterwards, reporting -32009 for stale targets rather than acting blindly. The family is gated by McpMachine, the risky subset by McpMachineDangerous, and writes additionally require read-only mode to be off. Route managed sub-connections from MessageHandle and OfflineProc, keep the single-in-flight rule by sharing the pending table with a request kind, and move the shared JSON/lock/encoding helpers into McpInternal so both tool families use one implementation. Settings dialog, design docs and en_US/zh_TW/de_DE translations are updated accordingly. Co-Authored-By: deepseek-flash |
||
|
|
6c8336b497 |
Fix: Repair task actions and harden machine management
Scheduled task actions never worked end to end: the server built task packets with Unicode-style lengths in a MultiByte build, the client had no dispatch for the run/stop/delete/create commands, and the directory column was derived by replacing every occurrence of the task name, which misplaced tasks whose name also appeared in a parent folder. Packets are now assembled with narrow strings, the four commands are routed to RunOrStopTask/DelTask/CreateTask, and the folder is taken from the task path suffix only. The task list reply is trimmed to its real length instead of sending the whole 32 KB scratch buffer. On the client side, thawing a process resumed a single thread, the inject output path was copied from a narrow string using a wide-character length, and an empty window list dereferenced a NULL buffer. The service list leaked its enumeration block and one service handle per skipped entry, and the description was copied without a bound. Service start and stop now validate every handle, initialize the status structure, and stop synchronously before the start that follows a restart request, which previously always failed because the service was still in STOP_PENDING. Deleting a process used to test only the low byte of the PID and leaked the process handle on early exits, and a failed path conversion kept the previous process image name. The IE history timestamp wrote minutes and seconds in the wrong order, the favorites reader queried and closed an uninitialized registry key, software enumeration never closed its subkeys, and the task scheduler objects were not released after use. The network state list now frees the module, snapshot, and extended tables on every exit path, uses HeapFree for tables allocated on the process heap, and no longer calls an export that may be missing. Growth failures everywhere keep the original buffer instead of overwriting the pointer, the hosts reader rejects an invalid file size, and the COM task walk releases definitions and folders. Co-Authored-By: deepseek-flash |
||
|
|
c208b7368e |
Fix: Format net-state addresses as narrow strings on the client
The client is a MultiByte build, so the destination buffers are char[]
and _T("%s:%u") expands to an ANSI format that expects a char pointer.
The code nevertheless converted inet_ntoa() output to WCHAR* first, and
the ANSI %s stopped at the zero byte that follows the first wide
character. Every address therefore collapsed to its leading digit, so
192.168.0.55:443 was shown as 1 and 0.0.0.0:80 as 0 in the local and
remote address columns of the network connections tab.
Write the address and port straight into the char buffers with
sprintf_s in all four enumeration paths (legacy and Vista APIs, TCP and
UDP), and drop the now unused char2wchar_t helper.
Co-Authored-By: deepseek-flash
|
||
|
|
15a50db0a7 |
Fix: Keep IPv4 address bytes in network order for connection list
iphlpapi stores the address in network byte order inside the memory of the DWORD, it is not a host-order integer. For 192.168.0.55 the DWORD value on x86 is 0x3700A8C0 while its bytes are C0 A8 00 37, so shifting the value by 24/16/8/0 produced 37 00 A8 C0 and the dialog rendered "55.0.168.192" for both the local and remote address. Copy the DWORD with memcpy instead, which preserves the memory layout that inet_ntop and SetTcpEntry both expect. GetAddr4 is changed the same way, otherwise a forced disconnect would rebuild a wrong address and miss the target connection. Co-Authored-By: deepseek-flash |