The server's TLS menu already wrote the trust anchor into the Windows
client's registry and expected a restart. The Linux client grew the same
command handling (166/167) but, like Windows, only read the anchor once at
startup, so enabling or disabling TLS still meant restarting it. Both
handlers now take effect immediately.
TlsChannelLinux.cpp no longer initialises through std::call_once. The
process-level state (context, enabled, load error) lives behind a mutex and
TlsReload() rebuilds it from whatever anchor file is on disk, so
TlsEnabled() reflects the new transport as soon as the anchor is written or
removed. In-flight sessions survive the swap because SSL_new increments the
SSL_CTX reference count; the unit test pins that down by keeping an
established TLS connection open across a reload that frees the old context.
A reload that hits a bad anchor keeps the previous state and only logs: one
bad push should not brick a working client, and the next start is still
fail-closed. The pushed PEM is parsed before it is written for the same
reason -- a corrupt anchor on disk would lock the client out of the server
with no way to correct it remotely.
Only a real transport flip (plaintext <-> TLS) asks for a reconnect. An
anchor swap alone, as in a certificate rotation, leaves the current session
alone and applies to the next connection. The receive thread never closes
the socket itself; it sets g_needReconnect and the main heartbeat loop
disconnects so the outer reconnect loop can re-handshake, matching how the
heartbeat timeout path already works.
IOCPClient now latches the transport per connection (m_useTls) at handshake
time instead of consulting TlsEnabled() on every send and receive. Without
the latch, the second or so between the reload and the reconnect would push
plaintext into an established TLS session, or the reverse, producing
protocol errors for no reason.
RES_TLS (szReserved[19]) is refreshed right before each login, including
the resend after a group change, so the TLS column on the server flips with
the transport instead of showing the value from process start.
The confirmation dialogs now say what each platform does, with translations
in en_US, zh_TW and de_DE; the keys carry the literal \n escape the INI
parser understands.
Ending a sub-connection is not an error. OpenSSL 3 classifies a peer that
closes without close_notify as an unexpected-EOF protocol error, so every
terminal or file transfer session logged an SSL_read failure on the real
servers even though Recv promises 0 for a plain close and neither side sends
close_notify. SSL_OP_IGNORE_UNEXPECTED_EOF restores the intended semantics.
Verified with the reload unit test (RELOAD-OK, covering the in-flight
connection across a context swap, garbage payload rejection and a broken
anchor keeping TLS alive), an abrupt-close test (recv now returns 0 instead
of SOCKET_ERROR) and end to end against a protocol-faithful fake server that
signs MasterSettings with libsign: plaintext login, 166, TLS reconnect with
RES_TLS=1, 167, plaintext reconnect with RES_TLS=0. The Linux client, the
Debug Windows client and the Debug MFC server all build.
The cost is inherent to taking effect immediately: a remote session in
progress is dropped when the transport changes, and the MFC server briefly
shows the client as a duplicate login until the old connection is reaped
and the standby entry is promoted.
Co-Authored-By: deepseek-flash
Co-Authored-By: Claude Code <noreply@anthropic.com>
The Linux client is a standalone ELF with no in-memory loader and no
COMMAND_UPDATE handler, so the server's upgrade menu silently did nothing
for an LNX host. It can now push a new binary and have the client replace
and restart itself.
The server grows an LNX branch next to EXE/DLL/SC. It takes the ELF from an
explicit settings.ini LinuxClientPath, then ghost_linux_amd64 in the
program directory, then res\ghost_linux, then IDR_LINUX_GHOST, the copy
the server has always embedded for the client-build dialog, so a server
with nothing on disk can still upgrade; a configured path that cannot be
read is an error rather than a silent fallback. Only x86_64 ELF64 is
accepted. The payload adds a 32-byte MD5 trailer to the existing
[cmd][size:8][payload] layout, which the Windows branches keep unchanged.
linux/ghost in the tree is still the build from before this change and is
not updated here. It has to be refreshed before release: the embedded
default is copied from it at build time, and a stale copy would install a
client with no COMMAND_UPDATE handler, which can never be upgraded
remotely again.
The client verifies the declared size, elf magic, e_machine against its own
ELF header and the MD5 before touching anything, so a miscopied or corrupted
file never lands on disk. It then writes a same-directory temp file with
fsync and 0755 (a running executable cannot be truncated in place), renames
it over its own path atomically, keeps the replaced inode as .old, removes
the PID file, forks a detached child that waits for the old process to exit
and execs the new binary with the original argv, and finally exits with
S_CLIENT_UPDATE. Doing the rename and the exec in that order avoids ETXTBSY,
double connections under one client id, and a new instance that
isAlreadyRunning() would refuse to start.
Any failure (unwritable install directory, bad payload, fork) leaves the
client running on the old version; the reason goes to the client log and to
the server's message log through TOKEN_CLIENT_MSG, which required moving
that struct out of the Windows-only block in common/commands.h.
The shared client source had also stopped compiling off Windows: the
unknown-header diagnostic in IOCPClient::OnServerReceiving printed
TlsEnabled() and m_tls.IsReady() unconditionally, but TlsChannel and m_tls
only exist on Windows. That diagnostic now keeps the TLS details where the
channel exists and prints just the buffer dump everywhere else.
Verified end to end in WSL against the Debug server, foreground and -d
daemon: the PID changes, the installed file matches the pushed MD5, the host
reconnects, and ghost.old holds the previous binary. A read-only install
directory reports "cannot create ...: Permission denied" in the server log
with the client still online. With an invalid file at ghost_linux_amd64 the
server refuses it and names that path, which shows the disk source wins;
with nothing on disk the update goes through from the embedded ELF.
Co-Authored-By: deepseek-flash
Adds the 54th MCP tool, copy_files_c2c, which asks the source client to
push a set of files straight to another online client. Previously the only
way to move files between two clients was to download them to the server
machine and upload them again, so the data crossed the wire twice and
needed free disk on the server. With C2C the server only relays packets
and never parses or stores the payload.
Protocol. Two new ids in common/commands.h: COMMAND_C2C_SEND_FILES (174),
carrying the destination directory followed by a NUL-separated path list,
and TOKEN_C2C_SEND_RESULT (175), a fixed 45-byte result packet sent back
over the same sub-connection the transfer used. Clients advertise support
with the LOGIN_INFOR capability bit CLIENT_CAP_C2C_PATHS (0x0008), exposed
server side as Context::SupportsC2CPaths(). File transfer V2 already knew
how to push to dstClientID, so the destination side needed no change at
all; existing V2 receive paths keep working, and older clients simply do
not advertise the bit and are rejected with a clear error instead of
hanging.
Client. OnC2CSendFiles expands environment variables, collects directories
recursively, opens its own sub-connection (with sub-connection auth), and
runs FileBatchTransferWorkerV2 in a detached thread, then reports the
result on that same connection. Every early exit now reports a structured
failure rather than staying silent. The worker needs the process-level
InitFileUpload call that the receive path performs lazily, and a source
client may never have opened a file manager or received an upload, so the
initialization is factored into EnsureV2TransferInited() and called from
both paths.
Server. copy_files_c2c mirrors the existing upload tool: gates, id parsing,
capability checks, path validation, then a session keyed on the source host
that WaitC2CDone polls until the result packet arrives. The C2C relay
branch used to attach a CDlgFileSend progress dialog to the source's
sub-connection; NotifyProc then routed every later packet on that
connection to the dialog, which parsed the result packet as a V1 file
chunk and dropped it, so the tool always timed out even though the files
had arrived. IsC2CTransferPending() now suppresses dialog creation for
MCP-driven transfers only, leaving manual Ctrl+V transfers untouched.
Errors map to -32001 for a source-side transfer failure, -32010 for access
denied, -32009 for a missing path and -32002 for an offline destination.
Both hosts must be Windows: the destination is restricted too, because the
source embeds dst_dir in each V2 chunk name as an absolute Windows path and
only the Windows receiver applies it literally. A Linux or macOS receiver
never gets a target directory here (the clipboard flow sets one with
COMMAND_C2C_PREPARE, which this path does not send), so it would strip the
drive letter and write under / instead. Supporting that needs a prepare
packet carrying an explicit path plus an upgrade of those clients, so for
now the tool rejects them with -32005 rather than writing somewhere wrong.
Verified end to end on the Debug build: three files including a non-ASCII
name, an empty directory and a 3 MB binary arrived with matching SHA-256
in 3.2 s, a non-existent destination directory was created, and the
negative cases returned the documented codes. mcp_smoke.ps1 passes 41/41
with two new assertions and 27/27 in -SkipHost mode. Design notes, error
table and limitations are in docs/Mcp_FileTransfer_Design.md section 14
and docs/Mcp_Design.md section 15.
Co-Authored-By: deepseek-flash
Four new client-to-server tokens carry a win32/LSTATUS code when a
command fails instead of returning empty data: TOKEN_SERVICE_ERROR
(170), TOKEN_FILE_LIST_ERROR (171), TOKEN_REG_ERROR (172) and
TOKEN_DOWNLOAD_ERROR (173). They sit on byte values that were unused,
so existing numbering is untouched.
The three data paths that used to collapse "failed" and "empty" into
the same packet now distinguish them: OpenSCManager failures, directory
enumeration failures and RegOpenKeyEx failures all report the code that
was actually returned, and UploadToRemoteV2 reports why it found no
file to transfer before the transfer sub-connection is ever created.
Every failure branch still sends the packet the old server expects
(TOKEN_FILE_LIST, the empty TOKEN_REG_PATH/KEY pair, the ClientMsg
popup), so a new client talking to an old server degrades to exactly
today's behaviour instead of timing out. Success paths are byte-for-
byte unchanged.
Co-Authored-By: deepseek-flash
CChatManager::OnReceive opened with the same heartbeat guard the other
managers use, `if (szBuffer[0] == TOKEN_HEARTBEAT) return;`, before it
looked at the length. TOKEN_HEARTBEAT is 101, which is also the letter e,
and this channel carries free text rather than command bytes, so every
message starting with e -- "echo", "error", anything -- was silently
discarded. The sender never learned: the server's chat dialog had already
written the text into its own log, so the two sides disagreed about what
was said.
The guard is dead code here. Heartbeats travel on the main connection
only, as a multi-byte [101][Heartbeat] packet consumed by the main
dispatcher; the server never sends one on a chat sub-connection. Delete
it and keep the length check that follows.
The server keeps prepending a space when the GBK payload starts with
101, because already-deployed clients still carry the guard and losing
the message outright is worse than an invisible leading space. Note the
same guard, harmless today, still sits in the machine, file, proxy and
screen-hide managers.
Verified with the Debug instance and a local Debug client: with the
server's space temporarily disabled, chat_send "echo test" and
"second line" both showed up verbatim in the client dialog (read back
with WM_GETTEXT); with the space restored the first arrives as
" echo test". Details in docs/Mcp_Chat_Design.md section 5.
Co-Authored-By: deepseek-flash
SearchFilesRecursive built "%s\*.*" and "%s\%s" with wsprintf into
char[MAX_PATH] buffers and never checked the lengths. The recursion
allows 32 levels, so a search from a drive root accumulates paths well
past 260 characters and writes off the end of the stack frame. Debug
builds raise Run-Time Check Failure #2 and the dialog blocks the search
thread; release builds corrupt the stack silently.
Check the length before each build and skip the entry when the full
path does not fit, so neither the name nor the recursion below it is
recorded. The root directory is checked once at function entry, which
also stops an over-long root from being enumerated at all.
Apply the same guard to the directory listing paths in both file
managers, and bound the search pattern built from the incoming keyword.
Zero-initialize the buffers filled by ExpandEnvironmentStringsA so a
failed expansion is treated as an empty path instead of reading
uninitialized stack.
Verified against the debug client with a full C:\ scan (10,000 results,
finished, no dialog) and a repeated deep search afterwards.
Co-Authored-By: deepseek-flash
During a locked chat the client installs a WH_KEYBOARD_LL hook that
swallows Alt+Tab, Alt+F4, Alt+Esc, Ctrl+Esc and the Win keys, so the person
sitting at the machine cannot get out of the lock. The hook returned 1
without calling CallNextHookEx. Low-level hooks run last installed first,
and this one is installed later than the server's hotkey forwarding hook,
so it sits in front of it: returning 1 ended the chain and the forwarding
hook never saw those keys. With YAMA running on the same machine as the
client, Win shortcuts stopped reaching the remote host for as long as the
lock was up.
The event is now passed down the chain before it is swallowed.
CallNextHookEx hands the event to the other hooks only, not to the system
or the shell, so the local shell is still blocked and the lock behaves
exactly as before, while the forwarding hook can see the key and act on
it.
Co-Authored-By: deepseek-flash
The low-level keyboard hook callback runs only while the thread that
installed it pumps messages, but KeyLogger() gated PeekMessage on
IsConnected(). With offline recording enabled (kbrecord=Yes) and no
keyboard sub-connection, the hook stayed installed while its thread
never pumped, so every keystroke on the machine stalled against
LowLevelHooksTimeout (300 ms by default) and the hook was eventually
dropped by the system. Because the client installs its hook after YAMA
installs its own, the client's hook sits in front of YAMA's in the
chain, and the starved events broke the key pairs YAMA needs: Win
shortcuts and Ctrl+V forwarding stopped working while ordinary typing
was unaffected.
Pump messages unconditionally; this code is only reached while the hook
is installed, and the offline-record path installs it even without a
keyboard sub-connection.
Co-Authored-By: deepseek-flash
Clients packaged as SC_AES/sRDI shellcode run the payload image as raw
shellcode inside the loader stub, so the instant-message manager was
handed the stub's module handle. The stub's resource section carries no
IDD_DIALOG, and Windows rejects resource APIs on manually mapped images,
so DialogBoxParamA failed (error 1812 on Windows 11) and the bottom-right
popup never appeared after the operator sent a message.
The popup now falls back to an embedded compiled dialog template
generated from the IDD_DIALOG block in Script.rc and verified
byte-for-byte against the resource in the built ghost.exe. When the
resource lookup fails, the dialog is created with
DialogBoxIndirectParamA instead. Deployments where the resource lookup
already works keep the original path unchanged.
The incoming text is now terminated at the copied length. The server
sends the message body without a trailing NUL, so a message that filled
the 1024-byte buffer left SetDlgItemText reading past the end.
The title is now set with SetWindowTextW before the window is shown.
DialogBoxParamA converts the template's UTF-16 caption through the
system ANSI code page, so the Chinese title turned into "???" on 1252
systems (verified locally with a caption containing a character outside
CP936). The title follows the UI language: Chinese systems keep the
Chinese title, everything else shows "Message". The message body still
uses the ANSI path, preserving the existing per-ACP semantics.
Co-Authored-By: deepseek-flash
Clients packaged as SC_AES/sRDI shellcode run the payload image as raw
shellcode inside the loader stub, so the chat manager was handed the
stub's module handle. The stub's resource section only carries a
manifest, and Windows resource APIs reject manually mapped images
outright, so creating IDD_CHAT failed and the chat thread exited before
the window ever existed.
The chat window now falls back to an embedded compiled dialog template
that is byte-identical to the IDD_CHAT resource, and the title-bar icon
is rebuilt directly from the module's own resource directory instead of
LoadIcon, bypassing the loader on both paths. The PE walking code checks
every offset against SizeOfImage and the resource directory size, so a
malformed or truncated image returns NULL instead of faulting.
Deployments where the resource lookup already works keep the original
code path unchanged.
The dialog is now created and driven with the wide-character API. The
client is still an MBCS build, but an ANSI dialog renders text with the
system code page, so GBK chat text turned into mojibake on German and
other non-936 systems. Incoming text is converted CP936 to UTF-16 and
outgoing text strictly back to CP936; characters GBK cannot represent
(emoji, accented letters) are refused with a visible notice instead of
silently becoming '?'. Static labels follow the system UI language, and
IDD_CHAT now uses the scalable MS Shell Dlg face so font linking can
supply CJK glyphs.
The window is now positioned explicitly as well. DS_CENTER in the
template put it at the work area origin on the three-monitor host: the
centred position came out negative there and Windows clamps out-of-range
creation coordinates to that origin. It is centred in the work area of
the monitor under the cursor instead, falling back to SPI_GETWORKAREA.
Teardown no longer leaves a hidden window behind either. The dialog
thread blocked in GetMessageW and never saw m_bRun cleared, while the
destructor waited for that thread before sending the message that would
have destroyed the window, so a close command that never arrived (the
sub-connection already gone, or WaitSendIdle timing out before CancelIO)
leaked the window, the dialog thread and the manager loop. The
destructor now destroys the window first, the loop checks m_bRun before
blocking, and it destroys the window itself if it exits first.
Co-Authored-By: deepseek-flash
Scheduled task actions never worked end to end: the server built task
packets with Unicode-style lengths in a MultiByte build, the client had
no dispatch for the run/stop/delete/create commands, and the directory
column was derived by replacing every occurrence of the task name, which
misplaced tasks whose name also appeared in a parent folder. Packets are
now assembled with narrow strings, the four commands are routed to
RunOrStopTask/DelTask/CreateTask, and the folder is taken from the task
path suffix only. The task list reply is trimmed to its real length
instead of sending the whole 32 KB scratch buffer.
On the client side, thawing a process resumed a single thread, the
inject output path was copied from a narrow string using a wide-character
length, and an empty window list dereferenced a NULL buffer. The service
list leaked its enumeration block and one service handle per skipped
entry, and the description was copied without a bound. Service start and
stop now validate every handle, initialize the status structure, and stop
synchronously before the start that follows a restart request, which
previously always failed because the service was still in STOP_PENDING.
Deleting a process used to test only the low byte of the PID and leaked
the process handle on early exits, and a failed path conversion kept the
previous process image name. The IE history timestamp wrote minutes and
seconds in the wrong order, the favorites reader queried and closed an
uninitialized registry key, software enumeration never closed its subkeys,
and the task scheduler objects were not released after use.
The network state list now frees the module, snapshot, and extended
tables on every exit path, uses HeapFree for tables allocated on the
process heap, and no longer calls an export that may be missing. Growth
failures everywhere keep the original buffer instead of overwriting the
pointer, the hosts reader rejects an invalid file size, and the COM task
walk releases definitions and folders.
Co-Authored-By: deepseek-flash
The client is a MultiByte build, so the destination buffers are char[]
and _T("%s:%u") expands to an ANSI format that expects a char pointer.
The code nevertheless converted inet_ntoa() output to WCHAR* first, and
the ANSI %s stopped at the zero byte that follows the first wide
character. Every address therefore collapsed to its leading digit, so
192.168.0.55:443 was shown as 1 and 0.0.0.0:80 as 0 in the local and
remote address columns of the network connections tab.
Write the address and port straight into the char buffers with
sprintf_s in all four enumeration paths (legacy and Vista APIs, TCP and
UDP), and drop the now unused char2wchar_t helper.
Co-Authored-By: deepseek-flash
iphlpapi stores the address in network byte order inside the memory of
the DWORD, it is not a host-order integer. For 192.168.0.55 the DWORD
value on x86 is 0x3700A8C0 while its bytes are C0 A8 00 37, so shifting
the value by 24/16/8/0 produced 37 00 A8 C0 and the dialog rendered
"55.0.168.192" for both the local and remote address.
Copy the DWORD with memcpy instead, which preserves the memory layout
that inet_ntop and SetTcpEntry both expect. GetAddr4 is changed the
same way, otherwise a forced disconnect would rebuild a wrong address
and miss the target connection.
Co-Authored-By: deepseek-flash
Add a third view to the web UI, the screen wall, which shows several
devices at once in one tab with 1x1 / 2x2 / 3x3 / 4x4 / 5x5 layouts and a
device sidebar on the left. Tiles are monitoring-only; clicking one
enlarges that device into the existing single-screen page for control, and
Back returns to the wall. The same device can be added several times: all
tiles of one device share a single decoder and a single stream.
The wall decodes at most 9 streams on desktop and 4 on touch devices.
Tiles beyond the budget keep receiving frames but have their decoder
closed and show the last frame plus a Paused badge; they are promoted
automatically when a live tile goes away. Subscriptions are reference
counted on the client (streams map with owner sets), so a stream is only
connected on the 0 -> 1 transition and disconnected on 1 -> 0, and the
wall and the single-screen page can share one device without tearing the
stream down.
Server side, WebClient now holds a set of watched devices instead of a
single id. A new multiWatch command flag selects set semantics, while
clients without it keep the old replace-all behaviour, so an old frontend
against the new server is unchanged. connect and disconnect responses echo
id and req so the frontend can route them, input commands carry an id and
are resolved against the watch set (dropped when the set has several
devices and no id), and the per-client watch set is capped at 32.
For fast recovery after a pause or when joining late, the server caches
each device's raw IDR payload and replays it on connect and on a new
keyframe command, then asks the client to force a new IDR. The client gets
COMMAND_SCREEN_KEYFRAME_REQ = 169 and an atomic request flag that is only
cleared after an IDR actually came out of the encoder, so a failed capture
or EAGAIN does not lose the request. The frontend retries the keyframe
request up to three times; an old client that ignores the command simply
recovers on the next natural GOP.
Also fix the keyframe cache double wrapping: BroadcastH264Frame used to
cache the full packet header and HandleConnect wrapped it again. The cache
now stores data + 9, len - 9 and every sender wraps it through
BuildFramePacket, and the cache is cleared on cold start and on resolution
change. StopRemoteDesktop is always called outside m_ClientsMutex, with
the ids collected under the lock first.
Co-Authored-By: deepseek-flash
The S_SERVER_EXIT respawn fix previously lived in test.cpp, which a
deployed TestRun.exe cannot pick up without reinstalling. Move the
reconnect decision into ClientDll::IsStoped(): when the master instance
is in S_SERVER_EXIT, report reconnectable immediately instead of waiting
for live shared instances to drain, so the already-deployed loader
reconnects against a hot-loaded DLL.
Shared instances stay connected to their own servers, preserving the
IsSharedRunning contract that the master's state change must not tear
them down.
Also guard the RUNNING_PARALLEL branch so re-entering StartClient on
reconnect spawns parallel instances once instead of duplicating them.
Co-Authored-By: deepseek-v4-pro
Two unrelated fixes bundled here.
1. Client respawn (ClientDll.cpp EasyRun/Run, test.cpp Run): after a host
is shared or transferred to another server, restarting the master
(server A) left the host's main instance stuck, because the respawn
loop waited on IsStoped() (g_bThreadExit && GetCount()==0), which never
becomes true while a still-alive shared instance holds AddCount(1).
S_SERVER_EXIT now triggers an immediate reconnect without waiting for
shared instances; client-exit / update still waits for all instances to
drain. Verified by 100 restart cycles.
2. Web login page (WebService.cpp): the MFC web server only substituted
__BASE_PATH__ in index.html and left __BRAND_NAME__ as a literal token
in the login page title/heading. Substitute it with "SimpleRemoter" to
match the original branding and the Go server's default.
Co-Authored-By: deepseek-v4-pro
Add a per-client TLS transport toggle controlled from the server, using the
presence of the client's trust-anchor certificate in the registry as the
single source of truth (no separate tls_enable flag).
- Client reports its TLS status via a new RES_TLS token (cert present -> 1)
appended to LOGIN_INFOR's reserved field.
- Server online list gains a "TLS" column after the permission column.
- The "experimental features" right-click menu gains "TLS传输" / "取消TLS"
with confirmation and a guard that prompts (instead of sending) when the
server has no TLS certificate ready.
- New COMMAND_TLS_ENABLE / COMMAND_TLS_DISABLE (166/167): the server pushes
its cert PEM into the client registry settings\tls_cert (enable) or deletes
it (disable). The client picks this up on next startup via the existing
ReadTrustAnchor logic, so the switch is non-live by design.
- Icons and en_US/zh_TW/de_DE translations for the new menu items.
Co-Authored-By: deepseek-v4-pro
Cloned miniPC images share the same MachineGuid, so their client_id
collides and only one host appears in the list. Fold the hostname into
the V2 client-ID hash so hosts with distinct names no longer collide.
Already-persisted client IDs are unchanged: they recompute only after
the settings/client_id registry value is cleared.
Server side, when a login reuses an existing client_id but the hostname,
IP, or username differs, emit a WARN diagnostic before assigning the
connection to the standby list. Observation-only, no behavior change.
Co-Authored-By: deepseek-v4-pro
Add optional one-way TLS to the MFC server (server/2015Remote) so the device
port can serve both TLS clients and legacy plaintext clients on the same port,
mirroring the Go server.
Server: on a connection's first bytes, sniff for a TLS ClientHello (0x16 0x03
+ handshake type 0x01). When [tls] Enabled=1 and the identity loads, hand the
socket to a short-lived blocking handshake thread (Option A) running Schannel
AcceptSecurityContext, then decrypt on recv and encrypt on send; plaintext
connections replay the sniffed bytes straight into the existing parse path, so
the plaintext code path is otherwise unchanged. The identity is loaded once
from [tls] CertPath/KeyPath as PEM + CNG (PKCS#8) — the same key pair the Go
server uses — and a missing [tls] section, an empty value, or a load failure
leaves plaintext serving intact and fail-closes any TLS ClientHello.
Also fix two transport-reliability bugs that surfaced end-to-end:
- send path: encrypt only the freshly appended plaintext tail and post a
single IOWrite wake-up guarded by a bSendPending flag, so back-to-back small
sends (terminal resize -> COMMAND_NEXT -> resize) no longer run concurrent
WSASends over the same mutable buffer (client saw DecryptMessage failures,
with WSAGetLastError() = 6001 / ERROR_DECRYPTION_FAILED);
- client Recv: keep the handshake's unconsumed tail bytes in m_raw and drain
them before the next recv, and log the real SECURITY_STATUS on
DecryptMessage failure instead of the stale Winsock error.
Co-Authored-By: deepseek-v4-pro
Add optional one-way TLS on the device port (6543), enabled per client via a
pinned trust anchor, so new clients encrypt their transport while legacy
plaintext clients keep working unchanged.
Server (server/go): sniff each accepted connection and wrap TLS peers
(ClientHello 0x16 0x03 + handshake type 0x01) in crypto/tls with MinVersion
TLS 1.2; everything else stays on the plaintext path. TLS is enabled only when
both YAMA_TLS_CERT and YAMA_TLS_KEY are set, and a cert/key load failure fails
startup loudly rather than silently serving plaintext.
Client (client/, Windows): Schannel one-way TLS. When the trust anchor is
present — registry value Software\<exehash>\settings\tls_cert (REG_SZ holding
the PEM), with fallback to settings.ini [settings] tls_cert or yama-ca.pem
beside the exe — every outbound connection (main + sub-connections) completes
a TLS 1.2 handshake before the app protocol and is strictly pinned to that
anchor via a chain engine with hExclusiveRoot; any handshake/cert failure is
fail-closed (no plaintext downgrade). Send uses EncryptMessage; Recv uses
DecryptMessage and reads plaintext from the stream-mode DATA segment (bufs[1])
rather than the record header.
Co-Authored-By: deepseek-v4-pro
CCaptureVideo::Open now returns S_FALSE when BindVideoFilter cannot bind a capture device, instead of S_OK. CVideoManager records the result in m_bVideoOpened and exits WorkThread before SendBitMapInfor, so a host without a webcam no longer sends a 0x0 BITMAPINFO to the controller.
Co-Authored-By: deepseek-v4-pro
Closing the client-side chat dialog (via the "end chat" button or the title-bar
X) now only hides the window and keeps the session alive, instead of destroying
it. Closing the chat stays server-initiated: the next message from the server
reopens the hidden dialog via the existing SW_RESTORE path in OnReceive, and the
dialog is only truly destroyed on COMMAND_CHAT_CLOSE or connection close.
Co-Authored-By: deepseek-v4-pro
Geographic location (city, country) from the geo APIs is UTF-8, but the client
and several server paths converted or stored it in the system ANSI code page,
turning umlauts ("ö"/"ä") into "?" or GBK mojibake ("B枚blingen"). Keep the
value UTF-8 end to end: the client caches it as UTF-8 and re-queries once after
an upgrade (keyed by __DATE__, the app's version convention), while the server
stores and displays it as UTF-8 in the online list, the activity log, the
client-info export, JSON/email payloads and search.
Also add a confirmation prompt before opening a remote chat from the toolbar,
with German, English and Traditional-Chinese translations.
Co-Authored-By: deepseek-v4-pro
V2 upload to a remote directory picked via the quick-icon shortcuts
(Desktop / Downloads / Home) landed files in a literal "%USERPROFILE%"
folder instead of the real profile. The shortcuts set m_Remote_Path to an
unexpanded "%USERPROFILE%\..." template (FileManagerDlg.cpp
OnRemoteDesktop/Downloads/Home), and the V2 receive path handed that
filename straight to RecvFileChunkV2 (prebuilt FileUpload lib), which writes
it verbatim. V1 upload already expanded env vars in COMMAND_FILE_SIZE
(client/FileManager.cpp ExpandPath), so this is a V2-only regression.
Expand the filename's environment variables in CKernelManager::OnReceive's
COMMAND_SEND_FILE_V2 branch before RecvFileChunkV2, rebuilding the packet
only when the expanded length differs; other packet types pass through
unchanged.
Co-Authored-By: deepseek-v4-pro
The file-transfer speed dialog previously sent a separate CMD_FILE_SPEED
(5 bytes) back-to-back before COMMAND_SCREEN_SPY / COMMAND_LIST_DRIVE when
opening remote desktop or file manager. The IOCP send path batches two
consecutive Send2Client calls into one WSASend of the accumulated
OutCompressedBuffer, so the client received the [FILE_SPEED][SCREEN_SPY]
command stream twice - the root cause of two remote-desktop dialogs popping
up on a single click (introduced in commit 76decec).
Fold the two values into MasterSettings (TransferChunkKb / TransferDurationMs,
uint16 each, before Reserved, sizeof unchanged at 1000) so they reach every
client on login and are broadcast to online clients when the dialog saves.
The client persists them into [transfer] on CMD_MASTERSETTING, guarded by
TransferChunkKb != 0 so older masters keep local defaults. CMD_FILE_SPEED(252)
and its client handler remain for backward compatibility, but the master no
longer sends it.
Update the design doc, the three GBK lang files' prompt entry, and the READMEs.
Co-Authored-By: deepseek-v4-pro
Migrate the SimplePlugins remote drawing-board overlay into the YAMA client
as an "实验功能" right-click submenu entry. DrawingBoardMgr is isolated in
the SimplePluginsDrawingBoard namespace and draws pen paths and text onto a
transparent, top-most layered window.
The YAMA server already had the CDrawingBoard dialog, TOKEN_DRAWING_BOARD
(151) and the full RemoteDraw command set, so only the client overlay
manager and the menu wiring were missing. Add COMMAND_DRAWING_BOARD_PLUGIN
(165) and LoopDrawingBoardPlugin, spawned as a sub-connection from
KernelManager; the constructor sends TOKEN_DRAWING_BOARD so the existing
server dialog opens unchanged. Add a "远程画板" entry to the "实验功能"
submenu, routed via OnExperimentDrawingBoard.
Co-Authored-By: deepseek-v4-pro
Migrate the SimplePlugins privacy-screen (virtual desktop) feature into the
YAMA client as an "实验功能" right-click submenu entry. The capture layer is
rewritten rather than copied: CScreenHideSpy now subclasses YAMA's ::CScreenSpy
(vDesk=TRUE) so capture and encoding reuse YAMA's encoder pipeline instead of
SimplePlugins' diverged jpeg capture chain; CScreenManagerBase and
CScreenHideManager are migrated under the SimplePluginsScreenHide namespace,
and SimplePlugins-only ALGORITHM_DEFAULT is mapped to ALGORITHM_DIFF.
Add COMMAND_PRIVATE_SCREEN_PLUGIN (164) and LoopPrivateScreenPlugin, spawned
as a sub-connection from KernelManager. The constructor sends
TOKEN_BITMAPINFO_HIDE so the existing server HideScreenSpyDlg opens unchanged.
Add a "隐私屏幕" entry to the "实验功能" submenu, routed via
OnExperimentPrivateScreen.
Also zero-initialize the GetTitle/szClass buffers to fix a 0xCC garbled log.
Co-Authored-By: deepseek-v4-pro
Migrate the SimplePlugins file-management feature into the YAMA client as an
experimental feature. The migrated CFileManager, MasterEncoder and Info-Zip
sources live under client/file/ and are isolated in the SimplePluginsFile
namespace to avoid clashing with the native FileManager class.
Add COMMAND_FILE_MANAGER_PLUGIN (163) and LoopFileManagerPlugin, spawned as
a sub-connection from KernelManager. Add an "实验功能" submenu with a
"文件管理" entry above "客户管理" in the online-hosts right-click menu,
routed via OnExperimentFileManager to the existing TOKEN_DRIVE_LIST_PLUGIN
dialog path.
Co-Authored-By: deepseek-v4-pro
Migrate the MachineManager client from SimplePlugins and wire the server toolbar.
Client:
- Add CMachineManager (process/window/net/software/IE history/favorites/service/task/hosts
enumeration plus process injection via yapi.hpp).
- Add COMMAND_MACHINE_MANAGE (162) and spawn the manager on an authenticated
sub-connection in KernelManager.
- Register MachineManager.cpp/.h and yapi.hpp in both client projects.
Server:
- Add the 主机管理 toolbar button (index 18, after 远程交谈) reusing the IDI_MACHINE icon,
plus en/zh_TW/de translations.
Fix:
- Free the IEnumSTATURL strings (su.pwcsUrl/su.pwcsTitle) with CoTaskMemFree, release the
enumerator, and set STATURL.cbSize to stop the IE-history leak reported by VLD.
Co-Authored-By: deepseek-v4-pro
The IDD_DIALOG caption was stored as UTF-8 bytes while the .rc file declares #pragma code_page(936) (GBK), so the resource compiler mis-decoded the caption and the client's bottom-right popup showed a garbled title. Convert the caption to GBK to match the declared code page and the rest of the file.
Co-Authored-By: deepseek-v4-pro
Add a "远程交谈" toolbar button (placed after 连接管理) that sends COMMAND_CHAT(161) to the selected host. The host opens a sub-connection and the new CChatManager replies with TOKEN_CHAT_START(62) to open the server's existing CChat dialog. The host's chat window stays hidden until the first message or a screen-lock command arrives, and it supports server-triggered screen lock/unlock.
Co-Authored-By: deepseek-v4-pro
Add a connection-management feature to YAMA: a toolbar button (after MCP)
opens a dialog listing the managed host's TCP/UDP connections, with
right-click force-disconnect for IPv4 TCP rows.
Client: a new CConnectionsManager enumerates connections via iphlpapi
(GetExtendedTcpTable/GetExtendedUdpTable, IPv4+IPv6) and answers the
refresh and kill commands over a sub-connection.
Server: a new CConnectionsDlg (DialogBase) shows the list with sortable
columns and a right-click menu; the title-bar icon reuses the toolbar's
connection icon (res/connections.ico).
Fix byte order found during review: iphlpapi returns an IPv4 address as a
network-order DWORD and the port's low 16 bits in network order, so
storing them raw made the dialog show reversed IPv4 addresses and ports.
The client now stores addresses as network-order bytes and ports as host
order (ntohs), and reverses the conversion on disconnect.
Co-Authored-By: deepseek-v4-pro
Add a novice-friendly "File Transfer Speed" dialog under the Advanced menu
that controls file-transfer speed in both directions without touching
SimplePlugins. Speed is passed through InitFileUpload's existing
chunkSizeKb/sendDurationMs arguments, so the precompiled library stays
untouched. Seven presets run from ~0.3 MB/s up to a new 10 MB/s tier plus an
unlimited tier; the chosen value is stored in [transfer] ChunkKb/DurationMs.
Upload reads THIS_CFG at the master's InitFileUpload (2015RemoteDlg.cpp:2225)
and takes effect on restart. Download is pushed to the client over a new
CMD_FILE_SPEED (252) command, sent from OnOnlineFileManager and
OnOnlineDesktopManager before each session opens, and read by all four client
InitFileUpload call sites via GetTransferSpeed so the process-global refcount
cannot latch a stale speed. All Chinese strings go through LangManager, with
en_US/zh_TW/de_DE entries added for the tier names, format strings and hint
text.
Co-Authored-By: deepseek-v4-pro
Add a dedicated ShareHostDlg with a "Use Shine protocol" checkbox (default
checked) so the operator can choose Shine (0) or HELL (1) when sharing or
transferring a host. The chosen protocol is appended to the wire payload as a
trailing colon field: "IP:PORT:0/1" for share and "IP:PORT:days:0/1" for
transfer.
The client parses the trailing field from COMMAND_SHARE and
COMMAND_ASSIGN_MASTER, applies it to new connections, and persists it so
auto-share/auto-transfer on restart keeps the same protocol. Old clients
ignore the extra field, and old/missing payloads fall back to -1 (baked-in
HELL), preserving compatibility with existing servers and share_list entries.
Co-Authored-By: deepseek-v4-pro
Implement the P2 upload_file tool to push a local file or directory from the
master to an online Windows host over the existing V2 file-transfer protocol.
The server drives FileBatchTransferWorkerV2 synchronously on the main
connection through a headless callback, reuses the list_files chain for the
overwrite pre-check, and is gated by McpFileTransfer=1 plus McpReadonly=0.
The client main connection never initialized the file-transfer module, so
g_status stayed 0 and RecvFileChunkV2 silently dropped every chunk, truncating
uploads to zero bytes. Add a once-per-process lazy InitFileUpload in the
COMMAND_SEND_FILE_V2 handler that mirrors the FileManager init; the destructor
deliberately does not Uninit so g_status remains 1 across reconnects.
Update the design doc to record the client-side change and correct the
upload_file description to state that sha256 is not returned (V2 has no
receiver-to-sender ACK; integrity is checked client-side and logged only).
Co-Authored-By: deepseek-v4-pro
ProcessCommand chose the MSG record size by testing "ulLength % 28 == 0"
before "% 48 == 0". The two sizes' least common multiple is 336 (7*48 =
12*28), so a 48-byte batch whose record count is a multiple of 7 was
misclassified as 28-byte MSG32 records, shifting every field and garbling
(or silently dropping) injected input.
Check "% 48 == 0" first. The modern controller always emits 48-byte MSG64;
the 28-byte MSG32 path is legacy 32-bit-controller compatibility and is only
reached when 48 does not divide evenly. This is the first feature (MCP
remote_keyboard "type", and the upcoming remote_mouse drag) to emit
multi-record batches, which is what made the latent bug reachable.
Co-Authored-By: deepseek-v4-pro
Add a read-only list_registry MCP tool for querying a remote Windows
host's registry. An empty path returns the five root keys; a path such as
HKEY_LOCAL_MACHINE plus subkeys returns that key's immediate subkeys and
values (name, type, and formatted data).
Client side: enumerate with KEY_READ instead of KEY_ALL_ACCESS and map the
full value-type set (REG_SZ, REG_DWORD, REG_BINARY, REG_EXPAND_SZ,
REG_MULTI_SZ, REG_QWORD, REG_NONE) so unknown types are no longer
mis-reported as REG_SZ. The registry manager now always sends both the
TOKEN_REG_PATH and TOKEN_REG_KEY packets (an empty packet when a part is
empty), making the two-packet reply deterministic for the server.
Server side: add the three-phase flow (COMMAND_REGEDIT, COMMAND_REG_FIND,
then PATH plus KEY) with per-host pending state, parse the fixed-width
wire format with bounds checks, format value data for JSON, and guard
registry paths against exceeding MAX_PATH to protect the client stack.
Co-Authored-By: deepseek-v4-pro
Replacing the old connection on a duplicate login made the client
reconnect in a tight loop. Instead, park the new connection in a standby
list keyed by clientID and promote it into the main host list only after
the old connection is removed by heartbeat timeout or disconnect.
Fix heartbeat attribution so a parked standby refreshes its own
last-heartbeat time rather than the main connection's, otherwise the main
never times out and the standby can never take over. Gate the offline
notification on an actual removal with no promoted standby to avoid a
spurious "host offline" when takeover happens. Skip promoting a standby
already marked removed, and reuse the normal login sign/settings path when
a standby is promoted.
Co-Authored-By: deepseek-v4-pro
Record the client's active-window history (start time, window title, and
dwell duration), newest first, skipping dwellings under 5 seconds and
breaking the timing on idle, capped at 500 entries. Add an "Activity
History" item inside the host's Client Management submenu that requests
the snapshot over the main connection and shows it in a new dialog. The
dialog rebuilds its edit control as a Unicode window so UTF-8 titles
render correctly instead of degrading to "?" through the MBCS ANSI
boundary. The menu item and dialog title go through _TR and are
localized in en_US and zh_TW.
Co-Authored-By: deepseek-v4-pro