The master's voice monitoring menu sends COMMAND_AUDIO; the client opens a
ConnAuth sub-connection with TOKEN_AUDIO_START, the server opens CAudioDlg
and answers COMMAND_NEXT, then audio flows both ways. The protocol matches
the Windows client, so the server needs no changes.
The server's ACM format was read from Audio.cpp and AudioDlg.cpp first:
WAVE_FORMAT_GSM610, 8000 Hz mono, 65-byte blocks of 320 samples (40 ms),
about 1625 B/s. libgsm 1.0.13 (AOSP external/libgsm mirror) is vendored
under cpp/gsm and built with -DSASR -DWAV49 so its MS-GSM packing is
byte-identical to ACM GSM610. Encode and decode use separate gsm states
because frame_index/frame_chain live in the state.
Uplink packets are always exactly 1000 bytes: CAudio::PlayBuffer copies
1000 bytes from the buffer start regardless of packet length, so a short
packet would over-read. Since 1000 is not a multiple of 65, blocks
straddle packets; the stream is continuous and codec state carries over.
AudioMonitor.kt owns AudioRecord (8 kHz/16-bit/mono, 320 samples a read)
and AudioTrack playback of decoded downlink PCM. RECORD_AUDIO is requested
with POST_NOTIFICATIONS before the projection dialog, and CaptureService
adds the microphone FGS type only when held, falling back on failure. An
8-second dialog wait or missing microphone reports a tip to the master
instead of failing silently.
Verified on an Android 15 emulator against the Debug server: dialog
opened, uplink started, server receive counter grew at ~1.6 KB/s.
Downlink playback was not exercised (the test machine has no recording
device); that path is code-reviewed only.
Co-Authored-By: deepseek-flash
The chat tools were Windows-only because the Android client had no
COMMAND_CHAT handler: the server asked for a chat sub-connection and the
command was silently dropped, leaving chat_open to time out. This adds
the full path on the client and the matching server gating.
Client: COMMAND_CHAT on the main connection spawns a chat thread that
opens an authenticated sub-connection, sends TOKEN_CHAT_START and waits
for the server to bind it. Incoming GBK lines are decoded and dispatched
to ChatSession, which drives an in-app chat activity; when accessibility
is available the activity is pulled to the front, otherwise a tappable
notification is posted. Outgoing text is strictly GBK encoded so emoji
and unmappable characters are rejected instead of becoming '?'. When the
server ends the session the activity closes itself, matching the Windows
client's DestroyWindow, and a new session starts from an empty log.
Server: a new CLIENT_CAP_REMOTE_CHAT bit lets the server tell new APKs
from old ones. ResolveHost now accepts Windows and Android hosts and
rejects older APKs up front with -32005 rather than waiting for the
command to expire. Tool platform masks, instructions, the docs matrix
and mcp/tools.json follow the same change.
Verified end to end on the Android 15 emulator: chat_open pops the
activity, Chinese text from the server renders, a device reply reaches
chat_wait, and ending the session from the master closes the activity
instead of leaving a dead window. The committed ghost.apk is stale and
must be rebuilt before release.
Co-Authored-By: deepseek-flash
The server's "uninstall host" action is the single-byte TOKEN_UNINSTALL on
the main connection. Windows clients have handled it for a long time; the
Android client ignored it, so the menu entry silently did nothing there.
Handle it in the Android client the only way Android allows: ask the
system to uninstall the package. The client first replies with COMMAND_BYE
and drops the connection, then opens the package installer's confirmation
dialog through the accessibility service, or posts a notification that
resumes the dialog from MainActivity when accessibility is off. The user
still has to confirm on the device; if they cancel, the client has already
left the server and must be reopened by hand. The manifest gains
REQUEST_DELETE_PACKAGES, without which the installer activity refuses the
request outright.
New APKs advertise CLIENT_CAP_UNINSTALL so the server can reject old
clients instead of sending a command nobody handles. The new MCP tool
uninstall_host is gated on McpManage and McpReadonly=0, rejects Linux and
macOS hosts, and offers the same wait=true verification as power_action,
reporting went_offline once the host disappears from the online list.
Verified on the emulator end to end: the tool returned went_offline after
200 ms, the system dialog appeared, confirming it removed the package.
Co-Authored-By: deepseek-flash
The master now sends COMMAND_UPDATE to Android hosts: it picks a
"Build Client -> Android" APK, checks the ZIP magic and that the package
carries this master's fingerprint, then sends [cmd][size][APK][xxh64].
The client verifies length and hash, writes filesDir/update.apk and
commits a PackageInstaller session, so the system installer still asks
the user to confirm - an app cannot replace itself silently. Write and
hash failures come back over TOKEN_CLIENT_MSG, so the master sees why
nothing happened instead of a silently dropped packet.
Sending the wrong file is what the fingerprint check guards against: a
template without the master id installs fine and then cannot connect
back. "Send anyway" is offered only after spelling that out, and the
client advertises CLIENT_CAP_APK_UPDATE (0x0400) so an old APK gets
"install a new build once by hand" instead of a packet it would discard.
Also report the real versionName/versionCode at login instead of the
hardcoded v1.0.0, add android/tools/verify_update_apk.py (pre-send check
of size, ZIP_STORED libs, ABI, package, versionCode and the decrypted
CONNECT_ADDRESS, which it still locates after BuildDlg rewrote szFlag),
and translate the nine new strings in en_US, zh_TW and de_DE.
Verified on the emulator and against the live release server: generate,
sign, send, install, and the device reconnects and re-grants screen
capture. Language packs are GBK and were appended as bytes.
Co-Authored-By: deepseek-flash