Add a "远程交谈" toolbar button (placed after 连接管理) that sends COMMAND_CHAT(161) to the selected host. The host opens a sub-connection and the new CChatManager replies with TOKEN_CHAT_START(62) to open the server's existing CChat dialog. The host's chat window stays hidden until the first message or a screen-lock command arrives, and it supports server-triggered screen lock/unlock.
Co-Authored-By: deepseek-v4-pro
Add a connection-management feature to YAMA: a toolbar button (after MCP)
opens a dialog listing the managed host's TCP/UDP connections, with
right-click force-disconnect for IPv4 TCP rows.
Client: a new CConnectionsManager enumerates connections via iphlpapi
(GetExtendedTcpTable/GetExtendedUdpTable, IPv4+IPv6) and answers the
refresh and kill commands over a sub-connection.
Server: a new CConnectionsDlg (DialogBase) shows the list with sortable
columns and a right-click menu; the title-bar icon reuses the toolbar's
connection icon (res/connections.ico).
Fix byte order found during review: iphlpapi returns an IPv4 address as a
network-order DWORD and the port's low 16 bits in network order, so
storing them raw made the dialog show reversed IPv4 addresses and ports.
The client now stores addresses as network-order bytes and ports as host
order (ntohs), and reverses the conversion on disconnect.
Co-Authored-By: deepseek-v4-pro
Replace the single-line, semicolon-separated keyword field with a taller
multi-line edit box (with a vertical scrollbar) where each keyword goes on
its own line. The stored format stays semicolon-separated, so existing
notify.ini files remain valid; load/save convert between newlines and
semicolons, trimming each keyword and skipping empty lines.
Also decode the stored matchPattern as UTF-8 when loading the dialog, so
non-ASCII keywords round-trip correctly (matching the CP_UTF8 encoding
used on save).
Co-Authored-By: deepseek-v4-pro
Add a novice-friendly "File Transfer Speed" dialog under the Advanced menu
that controls file-transfer speed in both directions without touching
SimplePlugins. Speed is passed through InitFileUpload's existing
chunkSizeKb/sendDurationMs arguments, so the precompiled library stays
untouched. Seven presets run from ~0.3 MB/s up to a new 10 MB/s tier plus an
unlimited tier; the chosen value is stored in [transfer] ChunkKb/DurationMs.
Upload reads THIS_CFG at the master's InitFileUpload (2015RemoteDlg.cpp:2225)
and takes effect on restart. Download is pushed to the client over a new
CMD_FILE_SPEED (252) command, sent from OnOnlineFileManager and
OnOnlineDesktopManager before each session opens, and read by all four client
InitFileUpload call sites via GetTransferSpeed so the process-global refcount
cannot latch a stale speed. All Chinese strings go through LangManager, with
en_US/zh_TW/de_DE entries added for the tier names, format strings and hint
text.
Co-Authored-By: deepseek-v4-pro
Add P7 management-control tools behind a single McpManage flag (plus
McpReadonly=0): kill_process, operate_window, control_service and
power_action. The write tools run a ready->confirm lifecycle on their
sub-connection, using a new followUp/followUpSent field to tell the two
arrivals of the same TOKEN_*LIST apart; the write command and the follow-up
refresh command go out as two separate Send2Client calls, with a new
WaitSendIdle() (context.h / Server.h) draining the outbound buffer in between
so the same buffer is never WSASend'd concurrently.
McpSettingsDlg gains a "management operations" checkbox (IDC_MCP_MANAGE), the
main toolbar gains an MCP entry button, and en/de/zh-TW strings are synced.
power_action is fire-and-forget over the main connection (no confirmation).
Verified end-to-end against a real Windows 10/VMware client: kill_process
returns remaining:[] and operate_window/control_service return ok:true with
their confirm packet arriving after an HTTP split. Verification surfaced a
prerequisite parser bug, fixed separately in a72e6eb, where HeaderParser
latched m_bShouldUnmask FALSE on HTTP continuation chunks and dropped the
confirm packet.
Co-Authored-By: deepseek-v4-pro
Add a dedicated ShareHostDlg with a "Use Shine protocol" checkbox (default
checked) so the operator can choose Shine (0) or HELL (1) when sharing or
transferring a host. The chosen protocol is appended to the wire payload as a
trailing colon field: "IP:PORT:0/1" for share and "IP:PORT:days:0/1" for
transfer.
The client parses the trailing field from COMMAND_SHARE and
COMMAND_ASSIGN_MASTER, applies it to new connections, and persists it so
auto-share/auto-transfer on restart keeps the same protocol. Old clients
ignore the extra field, and old/missing payloads fall back to -1 (baked-in
HELL), preserving compatibility with existing servers and share_list entries.
Co-Authored-By: deepseek-v4-pro
Add a "屏幕预览质量等级 (Screen Preview Quality Levels)" item to the
"高级 (Advanced)" menu that opens a dialog to edit the six preset
PreviewProfile levels (target encode width and JPEG quality) used by the
double-click single-preview and loop-snapshot floating windows. The dialog
edits a working copy in a full grid with per-field validation and a
restore-defaults button; on OK it persists the values to the [preview] INI
section.
ChooseScreenPreviewParams now reads from GetPreviewProfileCfg instead of the
hardcoded GetScreenPreviewProfile table, so preview requests sent after a
change use the configured parameters. LoadPreviewProfilesFromCfg loads the
saved levels at startup, falling back to the built-in defaults. Added
en_US/de_DE/zh_TW translations for the new menu and dialog strings.
Co-Authored-By: deepseek-v4-pro
Add an "高级 (Advanced)" menu after "其他 (Other)" whose
"远程桌面质量等级 (Remote Desktop Quality Levels)" item opens a dialog to
edit the six preset QualityProfile levels (max FPS, max width, codec
algorithm, bitrate). The dialog edits a working copy in a full grid with
per-field validation and a restore-defaults button; on OK it persists the
values to the [quality] INI section.
The server stays authoritative: LoadQualityProfilesFromCfg loads the saved
levels at startup (falling back to GetQualityProfile defaults), and
ScreenSpyDlg now sends CMD_QUALITY_PROFILES from GetQualityProfileCfg so
new remote-desktop sessions transmit with the configured parameters. Added
en_US/de_DE/zh_TW translations for the menu and dialog strings.
Co-Authored-By: deepseek-v4-pro
Wrap the last untranslated Chinese UI strings so English mode stops showing
raw Chinese. Format strings passed to sprintf/wsprintf and the status-bar
SendMessageTimeout calls now go through _TRF, and the CString/PostMessage
literals plus a few member-initializer and Compare values go through
_TR/_L. Covers the wallet validation message, the SOCKS proxy connection
log lines, the file-manager status bar, and the machine-info progress
messages.
Add the 24 corresponding entries to lang/en_US.ini and lang/zh_TW.ini
(GBK), keeping the escaped-format-string key style. The Yes/No/Desktop/
Recent keys already existed, so the BuildDlg and CFileManagerDlg compare
fixes reuse them.
Co-Authored-By: deepseek-v4-pro
Add two toolbar buttons — get clipboard (letter C) and set clipboard (letter P) —
after the screenshot button and before the minimize button, so clipboard sync stays
reachable in fullscreen mode where the system menu cannot be opened.
The buttons reuse the existing IDM_GET_CLIPBOARD / IDM_SET_CLIPBOARD system-menu
handlers by posting WM_SYSCOMMAND to the parent. The toolbar button count grows
from 16 to 18, and the slide/animation dimensions are widened from 640 to 720.
Letter C/P icons and Simplified-Chinese source strings ("获取剪贴板", "设置剪贴板")
are added, along with English and Traditional-Chinese translations.
Co-Authored-By: deepseek-v4-pro
Add terminal_open / terminal_exec / terminal_close so an AI can hold one
shell session per Windows host and run a sequence of commands with cwd and
environment preserved, instead of the one-shot exec_command.
The persistent terminal is a separate full-command write capability gated by
McpTerminal (default off) plus McpReadonly=0, with no whitelist and full
audit. One device maps to one terminal session via the shared m_TermSessions
map; idle sessions are swept after 300s. terminal_exec rejects commands that
contain & or | (they corrupt the sentinel control-operator chain) as well as
control characters.
Also harden exec_command and terminal_exec against newline/CR injection, fix a
dangling subCtx after an abrupt shell disconnect, and refresh lastActiveAt on
command completion. Add en/zh-TW translations for the new UI strings and a
design document covering both exec_command and the persistent terminal.
Co-Authored-By: deepseek-v4-pro
Add a one-shot exec_command MCP tool that runs a command on a remote
Windows host and returns stdout plus exit code, reusing the Web terminal
link (main-connection COMMAND_SHELL, a shell sub-connection, and a
sentinel command line located via rfind to tolerate ConPTY echo).
The sentinel marker is embedded in the command line ConPTY echoes back,
so it is only treated as hit when it starts a line (preceded by a newline
or the buffer start); this keeps the echoed marker from being mistaken
for the real sentinel when the echo packet arrives before the output.
Execution is gated at Web remote-desktop sensitivity: a read-only mode
(McpReadonly, default on, hides the tool) and a command whitelist
(McpCmdWhitelist) with built-in read-only prefixes. Shell metacharacters
(& | < > ^) are rejected before whitelist matching, and each execution is
recorded in the server audit log.
Extend the MCP settings dialog with the read-only checkbox and a
multi-line whitelist box (commas and newlines both accepted, normalized
to a comma-separated list on save), and add English and Traditional
Chinese mappings for the new UI and audit-log strings.
Co-Authored-By: deepseek-v4-pro
Add an optional MCP server (JSON-RPC 2.0 over Streamable HTTP) exposing
an online-host listing tool, protected by a Bearer token. Disabled by
default; configured via a new "Extensions > MCP Settings" dialog.
- McpServer: httplib + JSON-RPC 2.0 dispatch (initialize/ping/tools/list/tools/call)
- McpSettingsDlg: runtime-created dialog for enable/port/bind/token
- HostJson: extract single-host JSON serialization shared with WebService
- FRP: expose MCP port (union with listening/Web ports) when bound to 0.0.0.0
- i18n: en_US / zh_TW translations
Co-Authored-By: deepseek-v4-pro
Record the client's active-window history (start time, window title, and
dwell duration), newest first, skipping dwellings under 5 seconds and
breaking the timing on idle, capped at 500 entries. Add an "Activity
History" item inside the host's Client Management submenu that requests
the snapshot over the main connection and shows it in a new dialog. The
dialog rebuilds its edit control as a Unicode window so UTF-8 titles
render correctly instead of degrading to "?" through the MBCS ANSI
boundary. The menu item and dialog title go through _TR and are
localized in en_US and zh_TW.
Co-Authored-By: deepseek-v4-pro
- Add "Unban IP" menu item to the log message list (m_CList_Message)
right-click context menu, performing two actions on the extracted IP:
1. Remove the IP from the IPBlacklist singleton and persist to config
2. Scan the entire history host list (m_ClientMap->GetAll()) for all
clients matching the IP with AUTH_FORBIDDEN status, and restore
them to UNAUTHORIZED (0) — requiring re-authorization for safety
- Reuses ExtractFirstIPFromMessage() for dependency-free IPv4 parsing
- Handles the case where an IP is not in the blacklist and has no
matching forbidden clients with a clear "no action needed" message
- Menu item is grayed out when no log entry is selected
- Sync en_US / zh_TW language files with new translation strings
Co-Authored-By: DeepSeek V4 Pro
- Add "Ban IP" menu item to the log message list (m_CList_Message)
right-click context menu, allowing users to extract IPv4 addresses from
selected log entries and add them directly to the IP blacklist
- Reuses ExtractFirstIPFromMessage() from the previous commit for
dependency-free IPv4 parsing with per-segment 0-255 validation
- Checks against whitelist before banning (whitelisted IPs cannot be
banned) and skips IPs already in blacklist with clear feedback
- Immediately persists via THIS_CFG.SetStr to the config ini file;
IPBlacklist singleton takes effect instantly — subsequent connections
from banned IPs are rejected in IOCPServer::OnAccept() which already
calls IsIPBlacklisted() on every new connection
- Menu item is grayed out when no log entry is selected
- Sync en_US / zh_TW language files with new translation strings
Co-Authored-By: DeepSeek V4 Pro
- Add "Online Notify" menu item to the log message list (m_CList_Message)
right-click context menu, allowing users to extract IPv4 addresses from
selected log entries and add them to notification keywords
- Implement ExtractFirstIPFromMessage() for dependency-free IPv4 parsing
with per-segment 0-255 validation, handling diverse log message formats
- Extend NotifyManager::ShouldNotify with IP column (ONLINELIST_IP)
fallback check, ensuring IP keywords match regardless of the user's
configured ColumnIndex setting
- OnMsglogLoginNotify only appends keywords and enables the rule without
overwriting the user's existing ColumnIndex or TriggerType settings
- Menu item is automatically grayed out when PowerShell is unavailable
or no log entry is selected
- Sync en_US / zh_TW language files with new translation strings
Co-Authored-By: DeepSeek V4 Pro
- Add LicenseLimit field to LicenseInfo struct (0 = not set, unlimited)
- Add GetLicenseLimit/SetLicenseLimit: read/write LicenseLimit key in licenses.ini
- Append |lic:N to reserved field in TOKEN_AUTH response only when
LicenseLimit > 0; absent |lic: means no limit (client defaults to 9999),
so super admin authenticating to its own server is never falsely terminated
- Add "Sub-license limit" item in CLicenseDlg right-click menu (1-9999,
empty = clear limit); menu label shows current value in real time
- Limit change takes effect when sub-client re-authenticates
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Increase touch move threshold to prevent accidental drag detection.
Simulate physical double-click with two sequential click events and a 20ms delay instead of using non-standard dblclick event.
Fix folder renaming and unresponsiveness issues on Windows, Linux, and macOS.
