Commit Graph
5 Commits
Author SHA1 Message Date
yuanyuanxianganddeepseek-flash c4021e1fc9 Feature: Ship a built-in TLS certificate so encryption works out of the box
A fresh install used to require openssl before the server could speak TLS:
two empty paths in [tls] meant the identity failed to load and every
ClientHello was refused. TLS is now on by default and, when no custom
certificate is configured, the server generates its own self-signed one the
first time it needs it -- RSA-2048, SHA-256, CN=yama-server, CA:TRUE, valid
for ten years from one day before now. Plaintext clients are untouched, since
the device port still splits plaintext from TLS by sniffing the first six
bytes of a connection.

The certificate and its PKCS#8 private key are stored side by side in the
config under [tls] BuiltinCert / BuiltinKey as single-line base64 DER. Single
line, because the server has two config backends -- the registry for Release,
settings.ini for a Debug master -- and only a line without newlines means the
same read/write code serves both. That in turn required fixing the registry
reader: iniFile::GetStr copied into a 512 byte stack buffer, so a 1.5 KB value
came back as a truncated or empty string. The two-phase dynamic read now lives
in common/iniFile.h as ReadRegistryValueSz / ReadRegistrySz, and the copy that
client/TlsChannel.cpp had been carrying for its own trust anchor is gone. This
also makes the built-in certificate self-checking: Ensure() re-reads what it
just wrote and fails loudly if the round trip did not survive.

Import has to go through NCRYPT_PKCS8_PRIVATE_KEY_BLOB, matching the import
path in BuildIdentityFromDer. NCRYPT_PKCS8_PRIV_KEY_INFO_BLOB, which most
samples reach for, is not implemented by the Microsoft Software KSP and
returns NTE_INVALID_PARAMETER; a probe confirmed it, and the export type that
works is the one the importer already expected. Building an identity is now
split into a file front-end (PEM, fullchain, PKCS#1 hints) and a shared DER
core, so the built-in and file paths cannot drift apart.

That key also exposed a second problem worth fixing here. The identity binds
its private key to the certificate by name -- CRYPT_KEY_PROV_INFO with
pwszContainerName -- and Schannel resolves that name on every handshake
through CryptAcquireCertificatePrivateKey. With the fixed name
"YamaServerTlsKey", two server processes under the same Windows user shared
one key slot: whichever loaded last overwrote it, and the other process's next
handshake picked up a private key that does not match its certificate. That is
exactly the debug-plus-release pairing used here, and defaulting to a built-in
certificate is what makes it reachable, since the debug instance no longer
points at the same PEM as the release instance. The name is now the base name
plus the first six bytes of the certificate's SHA-1 thumbprint, e.g.
YamaServerTlsKey-c0d469eae8a4: different certificates get different keys,
instances sharing one certificate still share one key. MCP picks this up too.
The effective name goes to the trace log so a collision is visible without a
debugger. A stale key from an older build may still sit in the key store under
the old name; nothing references it and it is not deleted automatically, since
a running instance of an older build could be using it.

The trust anchor still has to be pushed. The client pins exactly one root
through an exclusive-root chain engine and checks no host name, so a
self-signed CA:TRUE leaf chains cleanly to itself -- but only if the client is
told about it. That is the existing 启用 TLS / 切换到 WSS command, which now
takes the PEM from ServerTlsIdentity::AnchorPem instead of re-reading the
configured cert file, so it reports the same certificate the server actually
serves for both sources. Losing the stored certificate (cleared registry, new
Windows user) regenerates it, and every client must be re-pushed the anchor.

Two places that used to fall back to [tls] CertPath now skip that fallback
while the built-in certificate is active: the MCP HTTPS front end at startup
and the prefill in its settings dialog. A self-signed certificate cannot pass
validation at a public MCP client, and the retained CertPath is only a
leftover from switching back to a custom certificate, so pretending to use it
would fail later with a worse message. MCP HTTPS with empty paths already
fails closed with a log line.

The TLS dialog gains a 内置证书 checkbox, ticked by default and unticked when
certificate paths are present; ticking it greys out the path rows without
clearing them, and shows either "generated on first use" or the expiry date
read back from the stored certificate. Saving writes four keys -- Enabled,
UseBuiltIn, CertPath, KeyPath -- and an explicit UseBuiltIn keeps the paths
from being used as an implicit switch. Every reader of [tls] Enabled now
defaults to 1, so the menu check, the dialog and the loader agree on a fresh
install. The status bar panes on 无 / 有 grew a third state, 内置, and the
pane width is measured across all three.

Translations were added to en_US, zh_TW and de_DE; skipping the German file
would have left the new dialog text in Chinese there, as de_DE is loaded from
disk rather than embedded.

Verified with the debug server against openssl s_client. Both the generated
built-in certificate (CN=yama-server) and an existing custom one
(CN=localhost) complete a TLS 1.2 handshake with the pinned certificate, and
their log lines show distinct key names, c0d469eae8a4 and 272f2adfb19c. An
unmodified client still runs in plaintext without an anchor, an existing custom
certificate deployment behaves exactly as before, and client and server both
build clean at Debug x64.

Co-Authored-By: deepseek-flash
2026-11-01 15:39:54 +01:00
yuanyuanxianganddeepseek-flash 46f4bf2dfb Fix: Make the WebSocket transport reachable and bounded on every platform
The POSIX clients were built without a connection config - Linux, macOS and
Android all construct IOCPClient without the injected CONNECT_ADDRESS - so
ConnectServer saw protoType -1 and quietly dialled the master port in plain
TCP. Setting protoType to WS in their settings did nothing and logged nothing,
and since CLIENT_CAP_PROTO_SWITCH is Windows-only the server could not move
them either. Give the client a SetDefaultProto() for that construction path
and call it from all three mains before the reconnect loop, with a one-shot
log when neither a conn nor a default protocol is available so the silent
fallback becomes visible next time.

Bound what a peer can make the client read. ReadHeader accepted the 8-byte
extended length and rejected only the sign bit, so a frame length of nearly
2^63 kept the connection streaming into a frame that would never end - alive
but never delivering another packet. Cap single frames at 256 MB, the same
value ServerWsSession already applies to client frames, and drop the
connection past it; real traffic is far below that.

Stop Reset() from writing the receive thread's frame state. Disconnect() can
run from the heartbeat or command thread, not just the receive thread, so
Reset() now only flips the atomic ready flag and a new ResetFrames() clears
m_remaining, m_masked and m_maskPos from Handshake() alone, before the
receive thread starts reading the socket. Those fields keep a single owner
without adding a lock to the receive hot path.

Finish a dead WS session instead of leaving it to the keepalive timer. When
the session had closed but wsState was still WS_Ready, sends were dropped and
nothing woke the pending recv, so a peer that closed and then went quiet held
the context for the 3-minute keepalive. shutdown() the socket there so the
recv returns zero bytes and the normal -2 teardown runs; RemoveStaleContext
would deadlock against the caller's own IoRefCount and can hand back a reused
context.

That shutdown only finishes the connection if a zero-byte read still tears it
down, and on the plain path it no longer did. DispatchPlain answers an empty
buffer with "handled", so a peer's FIN left the connection in CLOSE_WAIT
until keepalive - holding an IOCP context, a pending WSARecv and a rate-limit
slot - where the pre-WS code called ParseReceivedData and tore down at once.
Restore that teardown on the TLS_Plain branch, matching the other two. Checked
against a Debug server: a plain socket that half-closes used to sit in
CLOSE_WAIT with the peer's recv timing out, and now disappears immediately
with recv returning zero.

Two smaller cleanups from the same review. Give the WS upgrade its own prefix
buffer (wsPreClassify) instead of borrowing the TLS sniffer's, which was
serially reused for two state machines and read as if it were one. And stop
deriving the build dialog's protoType from the combo box index: items now
carry the protocol value as item data, keyed off the index AddString returns,
so inserting an option in the middle can no longer write the wrong number into
the generated client without any error. ApplyProtoSwitch loses its bool
return, which contradicted its own side effects and was ignored by every
caller.

Co-Authored-By: deepseek-flash
2026-10-30 19:15:14 +01:00
yuanyuanxiang d4f312c9d8 Feature: Tunnel the device protocol through a reverse proxy over WebSocket 2026-10-30 17:21:42 +01:00
yuanyuanxianganddeepseek-v4-pro 96b9eea70a Feat: One-way TLS transport for the MFC server
Add optional one-way TLS to the MFC server (server/2015Remote) so the device
port can serve both TLS clients and legacy plaintext clients on the same port,
mirroring the Go server.

Server: on a connection's first bytes, sniff for a TLS ClientHello (0x16 0x03
+ handshake type 0x01). When [tls] Enabled=1 and the identity loads, hand the
socket to a short-lived blocking handshake thread (Option A) running Schannel
AcceptSecurityContext, then decrypt on recv and encrypt on send; plaintext
connections replay the sniffed bytes straight into the existing parse path, so
the plaintext code path is otherwise unchanged. The identity is loaded once
from [tls] CertPath/KeyPath as PEM + CNG (PKCS#8) — the same key pair the Go
server uses — and a missing [tls] section, an empty value, or a load failure
leaves plaintext serving intact and fail-closes any TLS ClientHello.

Also fix two transport-reliability bugs that surfaced end-to-end:
- send path: encrypt only the freshly appended plaintext tail and post a
  single IOWrite wake-up guarded by a bSendPending flag, so back-to-back small
  sends (terminal resize -> COMMAND_NEXT -> resize) no longer run concurrent
  WSASends over the same mutable buffer (client saw DecryptMessage failures,
  with WSAGetLastError() = 6001 / ERROR_DECRYPTION_FAILED);
- client Recv: keep the handshake's unconsumed tail bytes in m_raw and drain
  them before the next recv, and log the real SECURITY_STATUS on
  DecryptMessage failure instead of the stale Winsock error.

Co-Authored-By: deepseek-v4-pro
2026-10-15 13:48:27 +02:00
yuanyuanxianganddeepseek-v4-pro ca0d7626d2 Feat: One-way TLS transport for the device port
Add optional one-way TLS on the device port (6543), enabled per client via a
pinned trust anchor, so new clients encrypt their transport while legacy
plaintext clients keep working unchanged.

Server (server/go): sniff each accepted connection and wrap TLS peers
(ClientHello 0x16 0x03 + handshake type 0x01) in crypto/tls with MinVersion
TLS 1.2; everything else stays on the plaintext path. TLS is enabled only when
both YAMA_TLS_CERT and YAMA_TLS_KEY are set, and a cert/key load failure fails
startup loudly rather than silently serving plaintext.

Client (client/, Windows): Schannel one-way TLS. When the trust anchor is
present — registry value Software\<exehash>\settings\tls_cert (REG_SZ holding
the PEM), with fallback to settings.ini [settings] tls_cert or yama-ca.pem
beside the exe — every outbound connection (main + sub-connections) completes
a TLS 1.2 handshake before the app protocol and is strictly pinned to that
anchor via a chain engine with hExclusiveRoot; any handshake/cert failure is
fail-closed (no plaintext downgrade). Send uses EncryptMessage; Recv uses
DecryptMessage and reads plaintext from the stream-mode DATA segment (bufs[1])
rather than the record header.

Co-Authored-By: deepseek-v4-pro
2026-10-14 21:10:21 +02:00