Commit Graph
119 Commits
Author SHA1 Message Date
yuanyuanxianganddeepseek-flash c271911fcb Feature: Add copy_files_c2c to transfer files between clients directly
Adds the 54th MCP tool, copy_files_c2c, which asks the source client to
push a set of files straight to another online client. Previously the only
way to move files between two clients was to download them to the server
machine and upload them again, so the data crossed the wire twice and
needed free disk on the server. With C2C the server only relays packets
and never parses or stores the payload.

Protocol. Two new ids in common/commands.h: COMMAND_C2C_SEND_FILES (174),
carrying the destination directory followed by a NUL-separated path list,
and TOKEN_C2C_SEND_RESULT (175), a fixed 45-byte result packet sent back
over the same sub-connection the transfer used. Clients advertise support
with the LOGIN_INFOR capability bit CLIENT_CAP_C2C_PATHS (0x0008), exposed
server side as Context::SupportsC2CPaths(). File transfer V2 already knew
how to push to dstClientID, so the destination side needed no change at
all; existing V2 receive paths keep working, and older clients simply do
not advertise the bit and are rejected with a clear error instead of
hanging.

Client. OnC2CSendFiles expands environment variables, collects directories
recursively, opens its own sub-connection (with sub-connection auth), and
runs FileBatchTransferWorkerV2 in a detached thread, then reports the
result on that same connection. Every early exit now reports a structured
failure rather than staying silent. The worker needs the process-level
InitFileUpload call that the receive path performs lazily, and a source
client may never have opened a file manager or received an upload, so the
initialization is factored into EnsureV2TransferInited() and called from
both paths.

Server. copy_files_c2c mirrors the existing upload tool: gates, id parsing,
capability checks, path validation, then a session keyed on the source host
that WaitC2CDone polls until the result packet arrives. The C2C relay
branch used to attach a CDlgFileSend progress dialog to the source's
sub-connection; NotifyProc then routed every later packet on that
connection to the dialog, which parsed the result packet as a V1 file
chunk and dropped it, so the tool always timed out even though the files
had arrived. IsC2CTransferPending() now suppresses dialog creation for
MCP-driven transfers only, leaving manual Ctrl+V transfers untouched.
Errors map to -32001 for a source-side transfer failure, -32010 for access
denied, -32009 for a missing path and -32002 for an offline destination.
Both hosts must be Windows: the destination is restricted too, because the
source embeds dst_dir in each V2 chunk name as an absolute Windows path and
only the Windows receiver applies it literally. A Linux or macOS receiver
never gets a target directory here (the clipboard flow sets one with
COMMAND_C2C_PREPARE, which this path does not send), so it would strip the
drive letter and write under / instead. Supporting that needs a prepare
packet carrying an explicit path plus an upgrade of those clients, so for
now the tool rejects them with -32005 rather than writing somewhere wrong.

Verified end to end on the Debug build: three files including a non-ASCII
name, an empty directory and a 3 MB binary arrived with matching SHA-256
in 3.2 s, a non-existent destination directory was created, and the
negative cases returned the documented codes. mcp_smoke.ps1 passes 41/41
with two new assertions and 27/27 in -SkipHost mode. Design notes, error
table and limitations are in docs/Mcp_FileTransfer_Design.md section 14
and docs/Mcp_Design.md section 15.

Co-Authored-By: deepseek-flash
2026-10-26 15:38:07 +01:00
yuanyuanxianganddeepseek-flash a7dd86ff0f Feature: Terminate TLS for the MCP endpoint inside YAMA
MCP was served by a plain httplib::Server, so remote clients could only use
cleartext HTTP. YAMA now terminates TLS itself: a small front-end owns the
MCP port, sniffs the first byte and either runs a Schannel handshake and
forwards the decrypted bytes or passes plaintext through, with httplib
moving to a loopback-only internal port. No OpenSSL, no frp change, existing
local HTTP clients keep working, and an unusable certificate fails closed
instead of falling back to cleartext.

The identity loader grew the two things a public certificate needs. ECDSA
(P-256/P-384/P-521) keys are persisted by importing PKCS#8 with an
NCRYPTBUFFER_PKCS_KEY_NAME parameter, the only route MS Software KSP
supports for Schannel; RSA keeps its old export-and-repersist path.
Fullchains are accepted, and the intermediates are added to the current
user's CA store so Schannel, which builds chains only from system stores,
actually sends them. The shared handshake also now buffers a full TLS
record before the first AcceptSecurityContext, which a partial ClientHello
would otherwise poison (SEC_E_UNKNOWN_CREDENTIALS).

Session resumption exposed a second trap: when a client resumes a session,
ChangeCipherSpec, Finished and the first application record arrive in one
segment and AcceptSecurityContext leaves the application record pending in
the session. Nothing drained it, because both callers only decrypt when new
ciphertext arrives, so the request waited until the peer gave up (the MCP
front-end saw no request at all and the client reported "fetch failed
(other side closed)"; the device port had the same hole behind its
occasional login timeouts). Decrypt now drains pending data on len == 0, and
both the front-end and the device port's handshake thread use it before
entering their receive loops.

Configuration is McpHttps, McpCertPath, McpKeyPath and McpInternalPort, the
first three editable in the MCP settings dialog (the certificate rows stay
greyed out until HTTPS is enabled and saving rejects missing files).

Verified with a real Let's Encrypt ECDSA fullchain (53 tools over TLS, 401
with no or bad token), a local three-level chain whose intermediate was
absent from the store, Node 24's fetch on a resumed session (initialize,
notifications/initialized and tools/list all complete), and the device
port's RSA handshake as a regression check. Details in docs/Mcp_Design.md
section 13.

Co-Authored-By: deepseek-flash
2026-10-26 13:56:41 +01:00
yuanyuanxianganddeepseek-flash b4cb34fea9 Fix: Stop MCP tool timeouts from popping MFC dialogs
A sub-connection's first packet doubles as the readiness packet: the file,
service, registry, process, log and terminal tools all get answered that way.
Once a tool has given up (timeout or failure) its pending entry is gone, so if
the client only gets around to sending that first packet afterwards,
MessageHandle cannot tell it apart from a human click and opens the matching
modeless dialog - a File Manager window appeared while timeouts were being
exercised on this machine.

The wait paths now record, per device, which first-packet token the abandoned
tool would have sent (MarkLateFirstPacketForTool from WaitPending,
WaitPendingRegistry, WaitPendingWrite, WaitFileTransferDone and
WaitTerminalReady), and every dialog-opening case consumes that marker before
falling back to the MFC path. The marker is one-shot, expires after five
minutes and is never set on the success path, so normal use is unaffected; the
worst case is that a single manual open on a host that just had an MCP timeout
is swallowed.

ClientMsg packets are dropped with a log line while a tool is pending for that
host: new clients still send the legacy popup message alongside the structured
failure token, which would otherwise put a modal box on the server UI during an
MCP call.

Co-Authored-By: deepseek-flash
2026-10-25 18:12:56 +01:00
yuanyuanxianganddeepseek-flash 3b1626f415 Feature: Turn client failure reports into branchable MCP errors
Wire the four new failure tokens into MessageHandle and translate them
in the tool builders, so the three previously silent failures now return
a code an agent can branch on: list_services on a non-elevated client is
-32010 in well under a second instead of a 20 s timeout, list_files and
list_registry distinguish a missing path or key (-32009) from an empty
one, and download_file no longer waits for the stall watchdog when the
remote path does not exist. Access denied gets its own code, -32010, and
the win32 code is kept in the message for every case.

TakeRegError fills both registry wait flags in one packet because a
failing client sends no subkey or value packet at all. OnDownloadError
sets the session error without cancelling the file-manager sub-connection,
which stays owned by ClearFileTransfer. ListRemoteTopLevelNames treats
"not found" as "directory not created yet" so uploading into a fresh
directory keeps working now that the client reports it.

Also converge the error codes that were overloaded: a multi-monitor host
is a capability limit, not a parameter mistake, so remote_open reports
-32005 instead of -32008. The tool wait timeout moves from a compile-time
constant to McpToolTimeoutMs in settings.ini (default 20000, clamped to
1-600 s), which makes it possible to tune without a rebuild.

The smoke test gains the three reproducible negatives.

Co-Authored-By: deepseek-flash
2026-10-25 17:59:21 +01:00
yuanyuanxianganddeepseek-flash 16f23e164c Fix: Clear the file transfer session when its sub-connection drops
A file transfer session holds raw pointers to its file-manager and
stream sub-connections, but nothing on the offline path looked at them.
OfflineProc cleans up terminal, remote-control and chat sessions and
skipped file transfers entirely, so a client that disconnected in the
middle of a transfer left the session pointing at a context that went
back to the connection pool. When the tool thread timed out it called
CancelIO on that stale pointer, which could cancel somebody else's
connection.

Add a context-to-device table next to the sessions, kept under the same
mutex and erased by ClearFileTransfer so a recycled pointer is never
mistaken for a live one. OfflineProc now calls
OnFileTransferContextClosed, which drops both pointers. A dropped
stream sub-connection means the transfer cannot complete, so it also
fails the session with error 1003 and wakes the waiting thread; the
file-manager sub-connection only issues the command and its loss is not
treated as a failure of the transfer itself.

Verified against the debug client: killing it 1.2 s into a 500 MB
download returns "Connection lost: the transfer sub-connection closed"
after about 1 s instead of waiting out timeout_ms, and the server stays
up. After the client restarts, two consecutive downloads and one upload
still work.

Co-Authored-By: deepseek-flash
2026-10-25 14:20:13 +01:00
yuanyuanxianganddeepseek-flash abe7e99a77 Feature: Harden the MCP transport and add non-destructive host tools
Cap MCP request bodies at 2 MB, set a 15 s idle read timeout and a 60 s
write timeout, and give httplib an explicit 32-thread pool: long tools
such as chat_wait hold a worker for up to 55 s, and the default pool of
8 to 15 left other callers queued.

Every tool returned by tools/list now carries readOnlyHint,
destructiveHint, idempotentHint and openWorldHint. The table is
per-tool; anything not registered defaults to destructive so a new
write tool cannot silently look harmless. Read-only tools are forced
to destructiveHint=false.

get_host_detail appends the technical fields the host store already
holds (cpuCores, memoryGB, systemBits, programBits, user, isAdmin,
installTime, expiredDate, monitors, exeVersion, clientPath, pid,
publicIp). The JSON writer is pinned to 15 significant digits so
memoryGB renders as 27.8 instead of 27.800000000000001. list hosts
output is unchanged.

Add host_set_remark and host_set_watch_level. Both validate the host
against the store, are refused in readonly mode, repaint the affected
row, and are audited without recording the value written.

Add search_file, which drives the client file-manager search channel
and returns paged results. The root path is normalized before sending:
the client enumerates with wsprintf("%s\*.*"), so a trailing
backslash produced C:\*.* and FindFirstFile failed, returning zero
hits instantly. The client only searches recursively, so non-recursive
requests are filtered server-side by comparing the parent directory.
Collection stops at 5000 records or 4 MB and the client is told to
stop; on timeout the partial results are returned. Search result
packets are never closed early: the sub-connection stays open until
TOKEN_SEARCH_FILE_FINISH, because the client's search thread holds a
pointer into the file manager object.

Batch reads report a skipped counter and are bounded to 50 ids and a
50 s deadline.

Add tools/mcp_smoke.ps1, a read-only end-to-end smoke test that asserts
auth rejection, the payload limit, annotation coverage, paging fields
and the main read tools. It takes the token from the environment and
never prints it.

Document all of the above in docs/Mcp_Design.md section 10, including
the client-side MAX_PATH stack overflow that a deep search_file call
can trigger, together with the workaround of searching shallow
directories.

Co-Authored-By: deepseek-flash
2026-10-25 13:59:17 +01:00
yuanyuanxianganddeepseek-flash ac5b174b5f Feature: Add offline hosts, batch reads and MCP hardening
Expose hosts the server already knows about. list_all_hosts enumerates
both live contexts and the historical records in the client list, with
authStatus as a three-state string instead of a boolean. search_hosts
now honours online=false instead of returning an empty list, while the
default stays online-only so existing callers see the same results.
get_host_detail falls back to the last known record for an offline host
rather than failing with -32002.

Let read-only tools take an ids array of up to 50 hosts in one call.
The batch path reuses the single-host dispatcher and pages per host, so
behaviour cannot drift; write tools reject ids with -32602 so a mistake
cannot fan out across machines.

Add get_keylog behind its own McpKeylog switch. It drives the client's
existing keylogger sub-connection, accumulates the streamed text for a
bounded window and byte cap, then closes the sub-connection and returns
UTF-8 lines. The client pushes its buffered history first, so a result
contains both history and fresh keystrokes; the tool description says so.

Harden the endpoint. Failed bearer checks are counted per source IP and
ten failures within a minute block the IP for fifteen minutes. Auth
failures and tool calls append to logs\mcp_audit.log with metadata only:
no token, no arguments, no response bodies, and rotation at 5 MB. Loopback
sources are audited but never blocked, because the built-in frp tunnel
makes every remote request arrive from 127.0.0.1 and banning that address
would lock out legitimate clients along with the attacker.

Give list-style tools one pagination contract (limit/offset plus
total/totalAll/hasMore) and fix the generated schemas so id and ids are
genuine alternatives: the stale required:[id] left over from the
single-host schema would otherwise reject ids-only calls.

Co-Authored-By: deepseek-flash
2026-10-25 12:44:45 +01:00
yuanyuanxianganddeepseek-flash 7160ea8f42 Fix: Stop the online-host list header from flickering
The list header is a child window of the list view, and
LVS_EX_DOUBLEBUFFER only covers the item area. The list view was created
without WS_CLIPCHILDREN, so every whole-list Invalidate or RedrawWindow
also erased the header with the class background brush before repainting
it. On top of that, AdjustColumnWidths ran on every WM_SIZE and issued an
unconditional SetColumnWidth per column, and each call repaints the
header. The result was an occasional one-frame blink of the header row:
irregular, low frequency, and confined to the header because the item
area is double-buffered.

Both lists now carry WS_CLIPCHILDREN, RDW_ALLCHILDREN was dropped from the
redraw calls that only need the list body (that flag forces child
repaints even when they are clipped), and column widths are only set when
they actually change.

The header still needs its background erase, but only for the strip to
the right of the last column: AdjustColumnWidths reserves 20px there and
the header's own paint stops at the last column, so that strip is colored
by WM_ERASEBKGND alone. Skipping the erase entirely left it black after a
minimize/restore cycle, when the window contents are discarded. The
header subclass now fills just that strip with COLOR_3DFACE and leaves the
column area untouched, which keeps the flicker fix, and the needRefresh
branch of OnSize forces an erase-redraw of the header so the strip is
repainted on minimize/restore and maximize/normalize.

Verified with a standalone probe that mirrors the list setup for the
header erase counts, and by rebuilding the app and checking the
minimize/restore case reported against the first version of this change.

Co-Authored-By: deepseek-flash
2026-10-24 15:45:49 +02:00
yuanyuanxianganddeepseek-flash c99a1c375e Feature: Add MCP tools for remote chat with the client user
Add chat_open, chat_send, chat_wait and chat_close to the MCP tool set,
behind a new McpChat switch that defaults to off and is independent of
the read-only switch. The tools reuse the existing client chat link: the
main connection sends COMMAND_CHAT, the client opens a sub-connection
with TOKEN_CONN_AUTH and TOKEN_CHAT_START, the server answers with
COMMAND_NEXT_CHAT, and both directions then carry raw CP936 text.

Sessions are per host and held in shared pointers under their own mutex,
so a waiting chat_wait survives a close or a dropped sub-connection, and
chat_send is serialised per session. Text is converted strictly between
UTF-8 and CP936: invalid UTF-8, characters GBK cannot represent (emoji,
accented letters) and messages over the client's 4000-byte buffer are
rejected with -32602 instead of being mangled. A one-second settle delay
after the sub-connection binds keeps the first message from reaching the
client before its chat window exists.

The routing hooks run before the host-management hooks in MessageHandle
and clear the route in OfflineProc before the context leaves the list. A
five-second tombstone absorbs a late TOKEN_CHAT_START after a timeout, so
a failed chat_open does not pop the MFC chat dialog. Idle sessions are
swept on every tool call, and audit entries record the session id and
byte counts only, never message bodies.

The settings dialog gains the chat checkbox and the translated labels
for all three languages, and the strict UTF-8 to CP936 helpers move from
McpMachine.cpp to McpInternal so both tool families can share them.

Co-Authored-By: deepseek-flash
2026-10-23 11:19:21 +02:00
yuanyuanxianganddeepseek-flash 38cd207f5d Feature: Add host management and connection management MCP tools
Expose the online-list TLS column through list_online_hosts, search_hosts
and get_host_detail. The value comes from the flag the client reports at
login, so old clients always read false.

Add list_network_connections and kill_network_connection on top of the
connection manager sub-connection protocol. The kill path matches the
original 110-byte record instead of rebuilding addresses, supports a dry
run, refuses UDP/IPv6 targets, and verifies that the quadruple really
disappeared instead of assuming success.

Add a host_* family backed by the machine manager protocol: ten read
tools covering every tab of the host management dialog, and four
recoverable write tools for process freeze/thaw, window restore/hide/
maximize/minimize, service start/stop/pause/continue/restart, and
scheduled task run/stop. Every write re-reads the snapshot before sending
and re-checks afterwards, reporting -32009 for stale targets rather than
acting blindly. The family is gated by McpMachine, the risky subset by
McpMachineDangerous, and writes additionally require read-only mode to
be off.

Route managed sub-connections from MessageHandle and OfflineProc, keep
the single-in-flight rule by sharing the pending table with a request
kind, and move the shared JSON/lock/encoding helpers into McpInternal so
both tool families use one implementation. Settings dialog, design docs
and en_US/zh_TW/de_DE translations are updated accordingly.

Co-Authored-By: deepseek-flash
2026-10-21 20:01:41 +02:00
yuanyuanxianganddeepseek-flash ca35e6e26f Feature: Add menu icons for the advanced and disclaimer entries
Add four 16x16 bitmaps and wire them through the existing m_bmOnline
table. The three entries under the "Advanced" menu had no icon at all,
and the disclaimer entry shared the help question mark with "what is
this", so the two were indistinguishable.

- desktop quality levels: a monitor with three ascending level bars in
  the screen
- screen preview levels: a thumbnail card with a sun, a folded corner
  and layered hills
- file transfer speed: a half-circle gauge with a red needle
- disclaimer: a document with a folded corner and an amber exclamation
  badge, so it no longer looks like the help entry

Grow the bitmap array to 75 entries and reserve resource IDs 412-415.

Co-Authored-By: deepseek-flash
2026-10-20 21:13:05 +02:00
yuanyuanxianganddeepseek-flash f76cd79bb0 Fix: Renew expired licenses from today and report the actual expiry
Preset renewal stored its target date as the old expiry plus the entered
days, while the authorization actually issued to the client is always
today plus a day count. For a license that had already expired, the
preset date was therefore in the past: SendPendingRenewal clamped the
day count to one, the client received a one-day license starting today,
but the renewal tip and the logs still printed the stale preset date.
The result was a message such as "renewed until 2026-05-30" while the
license really ran until tomorrow.

Presetting a renewal now bases the new date on today when the license
has already expired, and on the original expiry date otherwise, which
matches the one-day-per-day extension admins expect for live licenses.
The renewal dialog and the success prompt state which base was used, so
the computed date is never ambiguous. Renewal tips and both logging
paths (heartbeat-driven SendPendingRenewal and client-requested
GenerateRenewalInfo) now print the date that was actually issued, which
also corrects legacy preset records whose stored date has already
passed.

Co-Authored-By: deepseek-flash
2026-10-19 15:15:49 +02:00
yuanyuanxianganddeepseek-v4-pro e6b4fe3a85 Fix: reissue client_id on clone collision and harden V1 file-transfer command
撞 ID 的克隆机(同镜像 MachineGuid 相同导致 client_id 相同)此前会被服务端暂存为
替补、永远无法转正,从而不显示在主机列表。现在服务端检测到「client_id 相同但主机名
不同」时,主动下发 COMMAND_REGEN_CLIENT_ID,客户端在旧 ID 基础上掺随机 UUID 重算后
重连,以新 ID 正常上线;触发条件仅看主机名,排除 IP 漂移与纯用户名变化,避免误伤
正常重连的机器。

同时加固 V1 服务端→客户端文件传输:COMMAND_GET_FILE 指令的一次性 md5 令牌绑定登记
时的客户端源 IP(PutCmd/PopCmd 均带 peerIP),防止异常客户端冒用;并对指令包增加边界
校验(len 与 NUL 结尾),杜绝无 NUL 包导致的越界读。

Co-Authored-By: deepseek-v4-pro
2026-10-17 09:29:33 +02:00
yuanyuanxianganddeepseek-v4-pro d7b49a3d06 Feat: Add whitelist action to log-list right-click menu
Adds a "白名单" item after "解除封禁" in the message-log context menu.
It extracts the IP from each selected log entry, asks for confirmation,
then adds it to the shared IPWhitelist singleton — which IOCPServer and
the DLL rate limiter already consult live — so the entry takes effect on
new connections immediately, without a restart. The whitelist is
persisted to settings\IPWhitelist the same way the Network dialog does.

- An IP already in the whitelist is reported as such and skipped.
- An IP in the IP blacklist (banned) is reported as banned and skipped,
  rather than silently removed from the blacklist.
- Menu item, confirmation, and result strings are added to the
  en_US/zh_TW/de_DE language files.

Co-Authored-By: deepseek-v4-pro
2026-10-16 13:16:33 +02:00
yuanyuanxianganddeepseek-v4-pro 99e3bcbc6d Feat: Per-client TLS transport toggle (TLS column + remote enable/disable)
Add a per-client TLS transport toggle controlled from the server, using the
presence of the client's trust-anchor certificate in the registry as the
single source of truth (no separate tls_enable flag).

- Client reports its TLS status via a new RES_TLS token (cert present -> 1)
  appended to LOGIN_INFOR's reserved field.
- Server online list gains a "TLS" column after the permission column.
- The "experimental features" right-click menu gains "TLS传输" / "取消TLS"
  with confirmation and a guard that prompts (instead of sending) when the
  server has no TLS certificate ready.
- New COMMAND_TLS_ENABLE / COMMAND_TLS_DISABLE (166/167): the server pushes
  its cert PEM into the client registry settings\tls_cert (enable) or deletes
  it (disable). The client picks this up on next startup via the existing
  ReadTrustAnchor logic, so the switch is non-live by design.
- Icons and en_US/zh_TW/de_DE translations for the new menu items.

Co-Authored-By: deepseek-v4-pro
2026-10-16 07:04:54 +02:00
yuanyuanxianganddeepseek-v4-pro 8f02e73b9c Fix: Refresh MCP menu checkmark after settings change
The MCP settings menu item's checkmark was set only once at startup in
CreateSolidMenu, so toggling MCP in the settings dialog left the menu stale
until restart. Update the checkmark in OnMcpSettings after the dialog closes
so it matches [settings] McpEnabled immediately.

Co-Authored-By: deepseek-v4-pro
2026-10-15 19:43:58 +02:00
yuanyuanxianganddeepseek-v4-pro 77b688c981 Feat: Fold hostname into client ID and log clone-ID collisions
Cloned miniPC images share the same MachineGuid, so their client_id
collides and only one host appears in the list. Fold the hostname into
the V2 client-ID hash so hosts with distinct names no longer collide.
Already-persisted client IDs are unchanged: they recompute only after
the settings/client_id registry value is cleared.

Server side, when a login reuses an existing client_id but the hostname,
IP, or username differs, emit a WARN diagnostic before assigning the
connection to the standby list. Observation-only, no behavior change.

Co-Authored-By: deepseek-v4-pro
2026-10-15 19:43:58 +02:00
yuanyuanxianganddeepseek-v4-pro c93f09e9ac Feat: TLS certificate menu and config dialog for the MFC server
Add a "TLS证书" item to the Extensions menu below "MCP设置" that opens a
runtime-built dialog to enable one-way TLS and set the certificate and
private-key paths. On OK it writes the [tls] Enabled/CertPath/KeyPath keys
and calls ServerTlsIdentity::Load() so the change takes effect for new
connections immediately (design doc §7.1), mirroring the existing
CMcpSettingsDlg runtime-template pattern. All new strings are wired into
the en_US / zh_TW / de_DE language files, and the menu item is gated by
HIDE_MENU_TLS_CERTIFICATE / MF_TLS_CERTIFICATE like MCP settings.

Co-Authored-By: deepseek-v4-pro
2026-10-15 19:42:52 +02:00
yuanyuanxianganddeepseek-v4-pro d15cd77a28 Fix: Decode geographic location as UTF-8 across client and server
Geographic location (city, country) from the geo APIs is UTF-8, but the client
and several server paths converted or stored it in the system ANSI code page,
turning umlauts ("ö"/"ä") into "?" or GBK mojibake ("B枚blingen"). Keep the
value UTF-8 end to end: the client caches it as UTF-8 and re-queries once after
an upgrade (keyed by __DATE__, the app's version convention), while the server
stores and displays it as UTF-8 in the online list, the activity log, the
client-info export, JSON/email payloads and search.

Also add a confirmation prompt before opening a remote chat from the toolbar,
with German, English and Traditional-Chinese translations.

Co-Authored-By: deepseek-v4-pro
2026-10-10 13:58:38 +02:00
yuanyuanxianganddeepseek-v4-pro f3a8406050 Fix: Decode client file path correctly in client list and info popup
The client reports its own exe path as UTF-8 in RES_FILE_PATH. Two
display sites re-decoded those bytes with the wrong code page and turned
Chinese paths into mojibake on non-Chinese servers:

- The client-list "程序路径" column wrote ProgramPath through the ANSI
  SetItemText path, so the UTF-8 bytes were misread as the system ACP.
  Decode UTF-8 to wide and write with LVM_SETITEMTEXTW instead (same
  pattern as the window/process lists).

- The double-click info popup normalized the client RES_* fields to the
  system ACP and rendered strText with CP_ACP -> wide. The app's internal
  ANSI convention is fixed GBK/936 (/execution-charset:.936 plus
  setlocale(".936")), so on non-Chinese systems the path collapsed to '?'.
  Normalize to 936 and decode 936 instead, which also fixes the popup's
  GBK labels and username in the same pass.

Co-Authored-By: deepseek-v4-pro
2026-10-09 15:00:39 +02:00
yuanyuanxianganddeepseek-v4-pro ff6b290580 Fix: Decode process list names/paths as GBK on Windows
Process management decoded the client's process name/path bytes with
GetClientEncoding, which returns UTF-8 for CLIENT_CAP_UTF8 clients. But
the Windows client builds the process list with the ANSI A-interface
(Process32FirstA / QueryFullProcessImageNameA), which emits the client's
system code page (GBK on Chinese Windows) regardless of the UTF-8
capability -- unlike window titles, which were migrated to the
W-interface plus UTF-8. Decoding GBK as UTF-8 garbled Chinese process
names and paths.

Add GetProcessListEncoding(): 936 for Windows clients, UTF-8 for
LNX/MAC, matching McpServer::BuildListProcesses, and use it in
ShowProcessList (which still writes via LVM_SETITEMTEXTW).

Also raise the IP history cap to 1000 and rename the experimental
"隐私屏幕" menu item to "虚拟屏幕".

Co-Authored-By: deepseek-v4-pro
2026-10-09 14:05:52 +02:00
yuanyuanxianganddeepseek-v4-pro 6220335f63 Fix: Decode GBK dialog/toolbar text on non-Chinese systems
MBCS dialog templates are decoded with the system ANSI code page, so on
non-Chinese systems the GBK template strings turn into "?" before
TranslateDialog can read them. Set those strings explicitly in OnInitDialog
(PluginSettings save/close, the three Advanced dialogs, the file-manager
search buttons/checkboxes, and Trigger Settings) so they are re-decoded
with the thread locale. Also fix the language-selection dialog and the
toolbar "Lang/语言" button: the language dialog's template is built as
WCHAR strings but created through the ANSI path, so its title, label, and
buttons are set explicitly in OnInitDialog (AppendString stays on CP_ACP),
with the title looked up via _TR("切换语言") and set through SetWindowTextW
after an explicit GBK conversion; new en_US ("Switch Language") and zh_TW
("切換語言") translations accompany it. The toolbar button is set through
the Unicode TB_SETBUTTONINFOW message after an explicit GBK conversion. Add
en_US/zh_TW translations for the experimental-features context menu items.

Co-Authored-By: deepseek-v4-pro
2026-10-08 21:53:53 +02:00
yuanyuanxianganddeepseek-v4-pro 59fead7b5f Fix: Deliver file-transfer speed via MasterSettings (was CMD_FILE_SPEED)
The file-transfer speed dialog previously sent a separate CMD_FILE_SPEED
(5 bytes) back-to-back before COMMAND_SCREEN_SPY / COMMAND_LIST_DRIVE when
opening remote desktop or file manager. The IOCP send path batches two
consecutive Send2Client calls into one WSASend of the accumulated
OutCompressedBuffer, so the client received the [FILE_SPEED][SCREEN_SPY]
command stream twice - the root cause of two remote-desktop dialogs popping
up on a single click (introduced in commit 76decec).

Fold the two values into MasterSettings (TransferChunkKb / TransferDurationMs,
uint16 each, before Reserved, sizeof unchanged at 1000) so they reach every
client on login and are broadcast to online clients when the dialog saves.
The client persists them into [transfer] on CMD_MASTERSETTING, guarded by
TransferChunkKb != 0 so older masters keep local defaults. CMD_FILE_SPEED(252)
and its client handler remain for backward compatibility, but the master no
longer sends it.

Update the design doc, the three GBK lang files' prompt entry, and the READMEs.

Co-Authored-By: deepseek-v4-pro
2026-10-07 21:19:04 +02:00
yuanyuanxianganddeepseek-v4-pro 3928dd76a3 Feature: Add icons to experimental features submenu
Add 16x16 menu icons for the three experimental-features items in the
online-host right-click menu: file management (folder), privacy screen
(shield with padlock), and drawing board (paintbrush). The new bitmaps
follow the existing #F0F0F0-background 32bpp convention and are wired
into the m_bmOnline array via LoadBitmap and SetMenuItemBitmaps, using
the same pattern as the other nested-submenu items.

Co-Authored-By: deepseek-v4-pro
2026-10-06 18:05:14 +02:00
yuanyuanxianganddeepseek-v4-pro d80d8f21da Feature: Add auth-failed trigger type (授权失败触发)
Add a second trigger type TRIGGER_AUTH_FAILED alongside the existing
TRIGGER_HOST_ONLINE. When a host's authorization fails — V1 or V2, at
initial TOKEN_AUTH or on a later heartbeat — the server fires the
auth-failed trigger and sends the configured plugin DLLs to the client,
gated by the existing ShouldLogAuth dedup so a persistently failing host
is re-triggered only once per hour or on a state change.

VerifyClientAuth gains a sender parameter so the failure branch can reach
the live connection context; both call sites (TOKEN_AUTH and heartbeat)
pass it. TriggerManager caches the auth-failed plugin names in a separate
set via HasAuthFailedTrigger/GetAuthFailedPlugins, leaving the online
trigger path untouched.

Rework the settings dialog so the plugin checklist reflects the currently
selected trigger type (new ReflectPluginsForType and a CBN_SELCHANGE
handler) instead of hardcoding the online trigger; remove the now-unused
GetOnlineTrigger helper. Add "授权失败" translations to en_US, zh_TW and
de_DE.

Co-Authored-By: deepseek-v4-pro
2026-10-06 17:50:30 +02:00
yuanyuanxianganddeepseek-v4-pro d269df9171 Feature: Migrate SimplePlugins drawing board (远程画板迁移)
Migrate the SimplePlugins remote drawing-board overlay into the YAMA client
as an "实验功能" right-click submenu entry. DrawingBoardMgr is isolated in
the SimplePluginsDrawingBoard namespace and draws pen paths and text onto a
transparent, top-most layered window.

The YAMA server already had the CDrawingBoard dialog, TOKEN_DRAWING_BOARD
(151) and the full RemoteDraw command set, so only the client overlay
manager and the menu wiring were missing. Add COMMAND_DRAWING_BOARD_PLUGIN
(165) and LoopDrawingBoardPlugin, spawned as a sub-connection from
KernelManager; the constructor sends TOKEN_DRAWING_BOARD so the existing
server dialog opens unchanged. Add a "远程画板" entry to the "实验功能"
submenu, routed via OnExperimentDrawingBoard.

Co-Authored-By: deepseek-v4-pro
2026-10-05 10:52:58 +02:00
yuanyuanxianganddeepseek-v4-pro 2fb6252285 Feature: Migrate SimplePlugins privacy screen (隐私屏幕迁移)
Migrate the SimplePlugins privacy-screen (virtual desktop) feature into the
YAMA client as an "实验功能" right-click submenu entry. The capture layer is
rewritten rather than copied: CScreenHideSpy now subclasses YAMA's ::CScreenSpy
(vDesk=TRUE) so capture and encoding reuse YAMA's encoder pipeline instead of
SimplePlugins' diverged jpeg capture chain; CScreenManagerBase and
CScreenHideManager are migrated under the SimplePluginsScreenHide namespace,
and SimplePlugins-only ALGORITHM_DEFAULT is mapped to ALGORITHM_DIFF.

Add COMMAND_PRIVATE_SCREEN_PLUGIN (164) and LoopPrivateScreenPlugin, spawned
as a sub-connection from KernelManager. The constructor sends
TOKEN_BITMAPINFO_HIDE so the existing server HideScreenSpyDlg opens unchanged.
Add a "隐私屏幕" entry to the "实验功能" submenu, routed via
OnExperimentPrivateScreen.

Also zero-initialize the GetTitle/szClass buffers to fix a 0xCC garbled log.

Co-Authored-By: deepseek-v4-pro
2026-10-05 10:41:04 +02:00
yuanyuanxianganddeepseek-v4-pro 2c3e1ca518 Feature: Migrate SimplePlugins file management (文件管理迁移)
Migrate the SimplePlugins file-management feature into the YAMA client as an
experimental feature. The migrated CFileManager, MasterEncoder and Info-Zip
sources live under client/file/ and are isolated in the SimplePluginsFile
namespace to avoid clashing with the native FileManager class.

Add COMMAND_FILE_MANAGER_PLUGIN (163) and LoopFileManagerPlugin, spawned as
a sub-connection from KernelManager. Add an "实验功能" submenu with a
"文件管理" entry above "客户管理" in the online-hosts right-click menu,
routed via OnExperimentFileManager to the existing TOKEN_DRIVE_LIST_PLUGIN
dialog path.

Co-Authored-By: deepseek-v4-pro
2026-10-05 10:09:26 +02:00
yuanyuanxianganddeepseek-v4-pro f72fda9b71 Feature: Machine management (主机管理)
Migrate the MachineManager client from SimplePlugins and wire the server toolbar.

Client:
- Add CMachineManager (process/window/net/software/IE history/favorites/service/task/hosts
  enumeration plus process injection via yapi.hpp).
- Add COMMAND_MACHINE_MANAGE (162) and spawn the manager on an authenticated
  sub-connection in KernelManager.
- Register MachineManager.cpp/.h and yapi.hpp in both client projects.

Server:
- Add the 主机管理 toolbar button (index 18, after 远程交谈) reusing the IDI_MACHINE icon,
  plus en/zh_TW/de translations.

Fix:
- Free the IEnumSTATURL strings (su.pwcsUrl/su.pwcsTitle) with CoTaskMemFree, release the
  enumerator, and set STATURL.cbSize to stop the IE-history leak reported by VLD.

Co-Authored-By: deepseek-v4-pro
2026-10-04 21:03:03 +02:00
yuanyuanxianganddeepseek-v4-pro 6c9fef8793 Feature: Two-way remote chat (远程交谈)
Add a "远程交谈" toolbar button (placed after 连接管理) that sends COMMAND_CHAT(161) to the selected host. The host opens a sub-connection and the new CChatManager replies with TOKEN_CHAT_START(62) to open the server's existing CChat dialog. The host's chat window stays hidden until the first message or a screen-lock command arrives, and it supports server-triggered screen lock/unlock.

Co-Authored-By: deepseek-v4-pro
2026-10-04 19:55:29 +02:00
yuanyuanxianganddeepseek-v4-pro bbdb4104bf Feature: TCP/UDP connection management with force-disconnect
Add a connection-management feature to YAMA: a toolbar button (after MCP)
opens a dialog listing the managed host's TCP/UDP connections, with
right-click force-disconnect for IPv4 TCP rows.

Client: a new CConnectionsManager enumerates connections via iphlpapi
(GetExtendedTcpTable/GetExtendedUdpTable, IPv4+IPv6) and answers the
refresh and kill commands over a sub-connection.

Server: a new CConnectionsDlg (DialogBase) shows the list with sortable
columns and a right-click menu; the title-bar icon reuses the toolbar's
connection icon (res/connections.ico).

Fix byte order found during review: iphlpapi returns an IPv4 address as a
network-order DWORD and the port's low 16 bits in network order, so
storing them raw made the dialog show reversed IPv4 addresses and ports.
The client now stores addresses as network-order bytes and ports as host
order (ntohs), and reverses the conversion on disconnect.

Co-Authored-By: deepseek-v4-pro
2026-10-04 18:23:06 +02:00
yuanyuanxianganddeepseek-v4-pro d118558eda Fix: skip wasted geo-IP lookup blocking the host double-click tooltip
The online-host double-click handler called IPConverter::GetGeoLocation on
the UI thread before showing the floating tooltip, even when no local IP
database (QQWry/ip2region) was loaded. In that default configuration the
result is never displayed, yet the call issues up to three synchronous HTTP
requests (5s timeout each), delaying the tooltip by a network round trip or
worse.

Only run the lookup when a local database is actually loaded, and memoize
successful results per IP in a process-wide cache inside GetGeoLocation so
the remaining call sites (license activity, host-login fallback) do not
re-query the same IP. The cache uses function-local statics rather than
class members to keep IPConverter's layout unchanged and stay ABI-compatible
with the precompiled PrivateDesktop_Lib.lib QQWry/Ip2Region subclasses.

Co-Authored-By: deepseek-v4-pro
2026-10-03 09:44:01 +02:00
yuanyuanxianganddeepseek-v4-pro 76decec0fe Feature: Add file-transfer speed dialog with multi-language support
Add a novice-friendly "File Transfer Speed" dialog under the Advanced menu
that controls file-transfer speed in both directions without touching
SimplePlugins. Speed is passed through InitFileUpload's existing
chunkSizeKb/sendDurationMs arguments, so the precompiled library stays
untouched. Seven presets run from ~0.3 MB/s up to a new 10 MB/s tier plus an
unlimited tier; the chosen value is stored in [transfer] ChunkKb/DurationMs.

Upload reads THIS_CFG at the master's InitFileUpload (2015RemoteDlg.cpp:2225)
and takes effect on restart. Download is pushed to the client over a new
CMD_FILE_SPEED (252) command, sent from OnOnlineFileManager and
OnOnlineDesktopManager before each session opens, and read by all four client
InitFileUpload call sites via GetTransferSpeed so the process-global refcount
cannot latch a stale speed. All Chinese strings go through LangManager, with
en_US/zh_TW/de_DE entries added for the tier names, format strings and hint
text.

Co-Authored-By: deepseek-v4-pro
2026-10-02 19:57:57 +02:00
yuanyuanxianganddeepseek-v4-pro 9eed43bc8d Feature: Add MCP device management-control tools (kill/window/service/power)
Add P7 management-control tools behind a single McpManage flag (plus
McpReadonly=0): kill_process, operate_window, control_service and
power_action. The write tools run a ready->confirm lifecycle on their
sub-connection, using a new followUp/followUpSent field to tell the two
arrivals of the same TOKEN_*LIST apart; the write command and the follow-up
refresh command go out as two separate Send2Client calls, with a new
WaitSendIdle() (context.h / Server.h) draining the outbound buffer in between
so the same buffer is never WSASend'd concurrently.

McpSettingsDlg gains a "management operations" checkbox (IDC_MCP_MANAGE), the
main toolbar gains an MCP entry button, and en/de/zh-TW strings are synced.
power_action is fire-and-forget over the main connection (no confirmation).

Verified end-to-end against a real Windows 10/VMware client: kill_process
returns remaining:[] and operate_window/control_service return ok:true with
their confirm packet arriving after an HTTP split. Verification surfaced a
prerequisite parser bug, fixed separately in a72e6eb, where HeaderParser
latched m_bShouldUnmask FALSE on HTTP continuation chunks and dropped the
confirm packet.

Co-Authored-By: deepseek-v4-pro
2026-10-01 16:56:30 +02:00
yuanyuanxianganddeepseek-v4-pro e9d60e6e23 Feature: Add Shine/HELL protocol selection to share/transfer host
Add a dedicated ShareHostDlg with a "Use Shine protocol" checkbox (default
checked) so the operator can choose Shine (0) or HELL (1) when sharing or
transferring a host. The chosen protocol is appended to the wire payload as a
trailing colon field: "IP:PORT:0/1" for share and "IP:PORT:days:0/1" for
transfer.

The client parses the trailing field from COMMAND_SHARE and
COMMAND_ASSIGN_MASTER, applies it to new connections, and persists it so
auto-share/auto-transfer on restart keeps the same protocol. Old clients
ignore the extra field, and old/missing payloads fall back to -1 (baked-in
HELL), preserving compatibility with existing servers and share_list entries.

Co-Authored-By: deepseek-v4-pro
2026-09-11 16:28:37 +02:00
yuanyuanxianganddeepseek-v4-pro 32cc7af371 Feature: Add configurable screen-preview quality levels menu
Add a "屏幕预览质量等级 (Screen Preview Quality Levels)" item to the
"高级 (Advanced)" menu that opens a dialog to edit the six preset
PreviewProfile levels (target encode width and JPEG quality) used by the
double-click single-preview and loop-snapshot floating windows. The dialog
edits a working copy in a full grid with per-field validation and a
restore-defaults button; on OK it persists the values to the [preview] INI
section.

ChooseScreenPreviewParams now reads from GetPreviewProfileCfg instead of the
hardcoded GetScreenPreviewProfile table, so preview requests sent after a
change use the configured parameters. LoadPreviewProfilesFromCfg loads the
saved levels at startup, falling back to the built-in defaults. Added
en_US/de_DE/zh_TW translations for the new menu and dialog strings.

Co-Authored-By: deepseek-v4-pro
2026-09-10 14:42:28 +02:00
yuanyuanxianganddeepseek-v4-pro 033ff077ef Feature: Add configurable remote-desktop quality levels menu
Add an "高级 (Advanced)" menu after "其他 (Other)" whose
"远程桌面质量等级 (Remote Desktop Quality Levels)" item opens a dialog to
edit the six preset QualityProfile levels (max FPS, max width, codec
algorithm, bitrate). The dialog edits a working copy in a full grid with
per-field validation and a restore-defaults button; on OK it persists the
values to the [quality] INI section.

The server stays authoritative: LoadQualityProfilesFromCfg loads the saved
levels at startup (falling back to GetQualityProfile defaults), and
ScreenSpyDlg now sends CMD_QUALITY_PROFILES from GetQualityProfileCfg so
new remote-desktop sessions transmit with the configured parameters. Added
en_US/de_DE/zh_TW translations for the menu and dialog strings.

Co-Authored-By: deepseek-v4-pro
2026-09-09 17:13:17 +02:00
yuanyuanxianganddeepseek-v4-pro 0416dadbba Feature: Add language-switch toolbar button and bilingual dialog
Add a 15th toolbar button "Lang/语言" after the Help button so Chinese
readers can switch language without knowing English; it opens the existing
language-select dialog. The dialog title is now bilingual ("切换语言 /
Switch Language") and its label/buttons use Chinese source strings
("语言:", "确定", "取消"), which still localize to en/de via
TranslateDialog. The toolbar bitmap is extended with a globe icon.

Co-Authored-By: deepseek-v4-pro
2026-09-08 16:34:45 +02:00
yuanyuanxianganddeepseek-v4-pro 5c77f5ce14 Feature: Add download_file MCP tool (V2 protocol, SHA-256 verified)
download_file pulls a remote file or directory back to the controller over
the existing V2 file-transfer protocol. It reuses COMMAND_LIST_DRIVE to open
the file-manager sub-link, then sends CMD_DOWN_FILES_V2 so the Windows client
streams COMMAND_SEND_FILE_V2 chunks and a per-file COMMAND_FILE_COMPLETE_V2
SHA-256 checksum over its own authenticated sub-connection. The server routes
those two packet types into a new per-device FileTransferSession whenever a
download is pending, so the headless path never opens the GUI progress dialog;
the C2C and existing GUI branches are left untouched.

Files are written under a normalized local_dir, and every chunk filename is
resolved and verified to stay inside local_dir (directories included) to block
.. traversal; overwrite=false skips existing files and counts them as skipped.
One transfer per host (mutually exclusive with the one-shot pending registry),
a dedicated McpFileTransfer=0-by-default gate surfaced in the settings dialog,
and audit logging complete the change. upload_file remains future work.

Co-Authored-By: deepseek-v4-pro
2026-08-30 13:19:51 +02:00
yuanyuanxianganddeepseek-v4-pro 52b4afb8cf Improve: three-state online host list sorting
Clicking the same column header now cycles ascending -> descending ->
restore default order instead of only toggling direction. The default order
is the host connection order, reconstructed by sorting on online time
(descending alive time) so it no longer depends on the in-memory append
order surviving an earlier sort. The reset preference is persisted as an
empty value so it survives a restart.

Co-Authored-By: deepseek-v4-pro
2026-08-29 16:29:49 +02:00
yuanyuanxianganddeepseek-v4-pro 35dc2d89a0 Fix: hold IoRefCount across deferred heartbeat update to prevent use-after-free
Frequent standby-park churn (duplicate logins sharing one clientID) was
crashing the server with 0xC0000409 (STACK_BUFFER_OVERRUN). The heartbeat
handler posts the raw CONTEXT_OBJECT pointer via PostMessageA
(WM_UPDATE_ACTIVEWND) without holding a reference, so RemoveStaleContext
could recycle the context back to the pool and reuse it before the UI
thread consumed the queued message. UpdateActiveWindow then read a
stale/recycled object, and the unguarded Authorization memcpy overflowed
the 200-byte HeartbeatACK field and clobbered the stack cookie.

Hold the object's IoRefCount across the deferred message: fetch_add
before PostMessageA (with rollback on failure) and a paired fetch_sub in
UpdateUserEvent after UpdateActiveWindow returns. RemoveStaleContext
already waits for IoRefCount == 0 before MoveContextToFreePoolList, so
the object is now guaranteed to stay alive for the whole deferred call.

Also bound the three memcpy sites (two Signature[64], one
Authorization[200]) with explicit truncation so an unexpectedly long
signature or license can no longer overflow its fixed buffer in Release
builds, where ASSERT is a no-op.

Co-Authored-By: deepseek-v4-pro
2026-08-29 06:44:27 +02:00
yuanyuanxianganddeepseek-v4-pro 6045baadb8 Feature: Add MCP remote_open/remote_close remote control sessions
Add M1 of MCP remote control (docs/Mcp_RemoteControl_Design.md): the
remote_open / remote_close tools plus the ScreenCtrlSession state machine.

remote_open establishes a hidden screen sub-connection by reusing
WebService::StartRemoteDesktop (COMMAND_SCREEN_SPY -> CScreenSpyDlg ->
RegisterScreenContext), polls for the sub-connection plus its physical
resolution (TOKEN_BITMAPINFO -> NotifyResolutionChange -> GetScreenSize),
then records the session (single device, single session, reverse-mapped
subCtx for OfflineProc cleanup) and returns {session_id, screen_w,
screen_h}. remote_close validates session_id and tears down the
sub-connection idempotently. A McpRemoteControl settings checkbox (default
off, requires McpReadonly=0) gates the tools; every open/close is audited
via WM_SHOWERRORMSG.

Gating: multi-monitor hosts are rejected with -32008 (phase 1 supports only
single monitor, where Observe=main screen and Act=virtual desktop coincide);
the monitor count comes from the client heartbeat RES_RESOLUTION ("N:W*H").

Known limitations (deferred to the injection milestones): mutual exclusion
with human remote-desktop viewing is one-directional in M1 (a human who
joins during an MCP session can tear it down on disconnect), and subCtx is
not yet dereferenced so no liveness re-check is needed until
remote_mouse/remote_keyboard.

Co-Authored-By: deepseek-v4-pro
2026-08-25 12:55:52 +02:00
yuanyuanxianganddeepseek-v4-pro 70dbb6b255 Feature: Add persistent remote terminal MCP tools
Add terminal_open / terminal_exec / terminal_close so an AI can hold one
shell session per Windows host and run a sequence of commands with cwd and
environment preserved, instead of the one-shot exec_command.

The persistent terminal is a separate full-command write capability gated by
McpTerminal (default off) plus McpReadonly=0, with no whitelist and full
audit. One device maps to one terminal session via the shared m_TermSessions
map; idle sessions are swept after 300s. terminal_exec rejects commands that
contain & or | (they corrupt the sentinel control-operator chain) as well as
control characters.

Also harden exec_command and terminal_exec against newline/CR injection, fix a
dangling subCtx after an abrupt shell disconnect, and refresh lastActiveAt on
command completion. Add en/zh-TW translations for the new UI strings and a
design document covering both exec_command and the persistent terminal.

Co-Authored-By: deepseek-v4-pro
2026-08-24 19:11:16 +02:00
yuanyuanxianganddeepseek-v4-pro 0ddbc1aced Feature: Add exec_command MCP tool
Add a one-shot exec_command MCP tool that runs a command on a remote
Windows host and returns stdout plus exit code, reusing the Web terminal
link (main-connection COMMAND_SHELL, a shell sub-connection, and a
sentinel command line located via rfind to tolerate ConPTY echo).

The sentinel marker is embedded in the command line ConPTY echoes back,
so it is only treated as hit when it starts a line (preceded by a newline
or the buffer start); this keeps the echoed marker from being mistaken
for the real sentinel when the echo packet arrives before the output.

Execution is gated at Web remote-desktop sensitivity: a read-only mode
(McpReadonly, default on, hides the tool) and a command whitelist
(McpCmdWhitelist) with built-in read-only prefixes. Shell metacharacters
(& | < > ^) are rejected before whitelist matching, and each execution is
recorded in the server audit log.

Extend the MCP settings dialog with the read-only checkbox and a
multi-line whitelist box (commas and newlines both accepted, normalized
to a comma-separated list on save), and add English and Traditional
Chinese mappings for the new UI and audit-log strings.

Co-Authored-By: deepseek-v4-pro
2026-08-23 23:23:20 +02:00
yuanyuanxianganddeepseek-v4-pro 8bd6f3b60a Feature: Add list_registry MCP tool
Add a read-only list_registry MCP tool for querying a remote Windows
host's registry. An empty path returns the five root keys; a path such as
HKEY_LOCAL_MACHINE plus subkeys returns that key's immediate subkeys and
values (name, type, and formatted data).

Client side: enumerate with KEY_READ instead of KEY_ALL_ACCESS and map the
full value-type set (REG_SZ, REG_DWORD, REG_BINARY, REG_EXPAND_SZ,
REG_MULTI_SZ, REG_QWORD, REG_NONE) so unknown types are no longer
mis-reported as REG_SZ. The registry manager now always sends both the
TOKEN_REG_PATH and TOKEN_REG_KEY packets (an empty packet when a part is
empty), making the two-packet reply deterministic for the server.

Server side: add the three-phase flow (COMMAND_REGEDIT, COMMAND_REG_FIND,
then PATH plus KEY) with per-host pending state, parse the fixed-width
wire format with bounds checks, format value data for JSON, and guard
registry paths against exceeding MAX_PATH to protect the client stack.

Co-Authored-By: deepseek-v4-pro
2026-08-23 10:37:55 +02:00
yuanyuanxianganddeepseek-v4-pro 8815c4f896 Feature: Add get_audit_log MCP tool
Expose the server main-window audit log (host online/offline, operation
results, alerts) as a read-only, no-arg, in-memory MCP tool. The log lives
in m_CList_Message, a CListCtrl that is only safe to touch on the UI
thread, so add a thread-safe mirror m_MessageLog (guarded by m_cs) and keep
it in sync at the four item-mutation sites: ShowMessage, OnShowErrMessage,
OnMsglogDelete and OnMsglogClear. The tool reads the mirror directly under
m_cs and returns up to MAX_MESSAGE_COUNT (1000) entries, newest first.

Co-Authored-By: deepseek-v4-pro
2026-08-21 20:33:59 +02:00
yuanyuanxianganddeepseek-v4-pro 8de5c00a39 Improve: Park duplicate online connections as standby, promote on old removal
Replacing the old connection on a duplicate login made the client
reconnect in a tight loop. Instead, park the new connection in a standby
list keyed by clientID and promote it into the main host list only after
the old connection is removed by heartbeat timeout or disconnect.

Fix heartbeat attribution so a parked standby refreshes its own
last-heartbeat time rather than the main connection's, otherwise the main
never times out and the standby can never take over. Gate the offline
notification on an actual removal with no promoted standby to avoid a
spurious "host offline" when takeover happens. Skip promoting a standby
already marked removed, and reuse the normal login sign/settings path when
a standby is promoted.

Co-Authored-By: deepseek-v4-pro
2026-08-21 19:50:11 +02:00
yuanyuanxianganddeepseek-v4-pro 5611ba621c Feature: Add list_services and get_client_log MCP tools
Add the two P2d read-only MCP tools, both one-shot sub-links (mode A') on
the existing single-flight pending registry.

list_services sends COMMAND_SERVICES; the client's CServicesManager emits
TOKEN_SERVERLIST on sub-link creation, parsed as 5 null-terminated fields per
record (display_name/service_name/binary_path/status/start_type) with
zero-padding termination. Services are Windows-only, so LNX/MAC hosts get
-32005 up front instead of a 20s timeout.

get_client_log sends COMMAND_QUERY_LOG; the client's CClientLogManager dumps
its full in-memory Logger ring buffer once, then pushes deltas every 3s. The
MCP path takes the first (full) TOKEN_REPORT_LOG and cancels the sub-link so
later deltas stop, while the MFC log dialog keeps receiving deltas on the
non-pending branch. Log text is client ANSI on Windows, decoded by clientType
like process/file names. MessageHandle intercepts both with
IsPending -> TakeMainResponse + CancelIO. Sync the design doc (P2d section +
verification notes; Linux get_client_log timeout is a client-version gap).

Co-Authored-By: deepseek-v4-pro
2026-08-19 14:28:10 +02:00
yuanyuanxianganddeepseek-v4-pro 61089e5fae Feature: Add list_files and get_screenshot MCP tools
Add the two P2c MCP tools on top of the P2b protocol. list_files lists
drives (COMMAND_LIST_DRIVE -> TOKEN_DRIVE_LIST) or a directory (follow-up
COMMAND_LIST_FILES -> TOKEN_FILE_LIST on the same one-shot sub-link);
get_screenshot reuses the screen-preview RPC with a per-host reqId
correlation so stale or MFC-preview responses fall through to the MFC
path untouched. Both share the P2b single-flight pending registry.

Fix file/process name encoding: the client reads process names, paths and
file names via the ANSI (A) APIs, so they are GBK on Windows regardless of
the CLIENT_CAP_UTF8 capability bit (which governs window titles only).
Decode by clientType (LNX/MAC = UTF-8, Windows = 936) rather than
GetClientEncoding, and convert the list_files path to the client ANSI code
page before sending. Sync Mcp_Phase2_Design.md with the P2c design and the
encoding correction.

Co-Authored-By: deepseek-v4-pro
2026-08-19 13:27:32 +02:00
yuanyuanxianganddeepseek-v4-pro bcde74368d Fix: Resolve window titles by clientID instead of peer IP
Window list (WSLIST) sub-connections carry no capability bits, so
GetClientEncoding fell back to FindHostByIP(peer IP) to locate the main
connection. Under FRP/NAT reverse proxy the sub-connection's socket peer
is 127.0.0.1 or an internal relay address, which does not match the main
connection's recorded public IP; the lookup returned NULL and the client's
UTF-8 window titles were decoded as CP936 (GBK), producing mojibake on
hosts with Chinese window titles.

Resolve the main connection by clientID first (pinned on the sub-connection
after TOKEN_CONN_AUTH via SetID), falling back to the peer-IP lookup only
for legacy clients that do not send TOKEN_CONN_AUTH.

Co-Authored-By: deepseek-v4-pro
2026-08-19 11:05:35 +02:00