Commit Graph
5 Commits
Author SHA1 Message Date
yuanyuanxianganddeepseek-flash c271911fcb Feature: Add copy_files_c2c to transfer files between clients directly
Adds the 54th MCP tool, copy_files_c2c, which asks the source client to
push a set of files straight to another online client. Previously the only
way to move files between two clients was to download them to the server
machine and upload them again, so the data crossed the wire twice and
needed free disk on the server. With C2C the server only relays packets
and never parses or stores the payload.

Protocol. Two new ids in common/commands.h: COMMAND_C2C_SEND_FILES (174),
carrying the destination directory followed by a NUL-separated path list,
and TOKEN_C2C_SEND_RESULT (175), a fixed 45-byte result packet sent back
over the same sub-connection the transfer used. Clients advertise support
with the LOGIN_INFOR capability bit CLIENT_CAP_C2C_PATHS (0x0008), exposed
server side as Context::SupportsC2CPaths(). File transfer V2 already knew
how to push to dstClientID, so the destination side needed no change at
all; existing V2 receive paths keep working, and older clients simply do
not advertise the bit and are rejected with a clear error instead of
hanging.

Client. OnC2CSendFiles expands environment variables, collects directories
recursively, opens its own sub-connection (with sub-connection auth), and
runs FileBatchTransferWorkerV2 in a detached thread, then reports the
result on that same connection. Every early exit now reports a structured
failure rather than staying silent. The worker needs the process-level
InitFileUpload call that the receive path performs lazily, and a source
client may never have opened a file manager or received an upload, so the
initialization is factored into EnsureV2TransferInited() and called from
both paths.

Server. copy_files_c2c mirrors the existing upload tool: gates, id parsing,
capability checks, path validation, then a session keyed on the source host
that WaitC2CDone polls until the result packet arrives. The C2C relay
branch used to attach a CDlgFileSend progress dialog to the source's
sub-connection; NotifyProc then routed every later packet on that
connection to the dialog, which parsed the result packet as a V1 file
chunk and dropped it, so the tool always timed out even though the files
had arrived. IsC2CTransferPending() now suppresses dialog creation for
MCP-driven transfers only, leaving manual Ctrl+V transfers untouched.
Errors map to -32001 for a source-side transfer failure, -32010 for access
denied, -32009 for a missing path and -32002 for an offline destination.
Both hosts must be Windows: the destination is restricted too, because the
source embeds dst_dir in each V2 chunk name as an absolute Windows path and
only the Windows receiver applies it literally. A Linux or macOS receiver
never gets a target directory here (the clipboard flow sets one with
COMMAND_C2C_PREPARE, which this path does not send), so it would strip the
drive letter and write under / instead. Supporting that needs a prepare
packet carrying an explicit path plus an upgrade of those clients, so for
now the tool rejects them with -32005 rather than writing somewhere wrong.

Verified end to end on the Debug build: three files including a non-ASCII
name, an empty directory and a 3 MB binary arrived with matching SHA-256
in 3.2 s, a non-existent destination directory was created, and the
negative cases returned the documented codes. mcp_smoke.ps1 passes 41/41
with two new assertions and 27/27 in -SkipHost mode. Design notes, error
table and limitations are in docs/Mcp_FileTransfer_Design.md section 14
and docs/Mcp_Design.md section 15.

Co-Authored-By: deepseek-flash
2026-10-26 15:38:07 +01:00
yuanyuanxianganddeepseek-flash 16f23e164c Fix: Clear the file transfer session when its sub-connection drops
A file transfer session holds raw pointers to its file-manager and
stream sub-connections, but nothing on the offline path looked at them.
OfflineProc cleans up terminal, remote-control and chat sessions and
skipped file transfers entirely, so a client that disconnected in the
middle of a transfer left the session pointing at a context that went
back to the connection pool. When the tool thread timed out it called
CancelIO on that stale pointer, which could cancel somebody else's
connection.

Add a context-to-device table next to the sessions, kept under the same
mutex and erased by ClearFileTransfer so a recycled pointer is never
mistaken for a live one. OfflineProc now calls
OnFileTransferContextClosed, which drops both pointers. A dropped
stream sub-connection means the transfer cannot complete, so it also
fails the session with error 1003 and wakes the waiting thread; the
file-manager sub-connection only issues the command and its loss is not
treated as a failure of the transfer itself.

Verified against the debug client: killing it 1.2 s into a 500 MB
download returns "Connection lost: the transfer sub-connection closed"
after about 1 s instead of waiting out timeout_ms, and the server stays
up. After the client restarts, two consecutive downloads and one upload
still work.

Co-Authored-By: deepseek-flash
2026-10-25 14:20:13 +01:00
yuanyuanxianganddeepseek-flash 39f0928de7 Fix: Finish a directory-only download instead of waiting for the timeout
The completion check compared filesDone against totalFiles minus
directoryCount and only ran on COMMAND_FILE_COMPLETE_V2. The client
sends no COMPLETE for directory entries, so a download of an empty
directory, or of a tree that holds only subdirectories, had zero
expected files and could never satisfy the check. The call sat there
until timeout_ms expired (600 s by default) and then reported 1002.

Mark the session done as soon as the directory entries account for
every entry the client declared. Verified with the debug client: an
empty directory returns in 0.2 s with zero files, a tree of nested
subdirectories returns in 0.2 s with the directories created, and a
directory holding three files still downloads them with the same
sizes and hashes as before.

Co-Authored-By: deepseek-flash
2026-10-25 14:16:46 +01:00
yuanyuanxianganddeepseek-v4-pro 6bcd593b6d Feature: Add upload_file MCP tool (V2 protocol, main-connection upload)
Implement the P2 upload_file tool to push a local file or directory from the
master to an online Windows host over the existing V2 file-transfer protocol.
The server drives FileBatchTransferWorkerV2 synchronously on the main
connection through a headless callback, reuses the list_files chain for the
overwrite pre-check, and is gated by McpFileTransfer=1 plus McpReadonly=0.

The client main connection never initialized the file-transfer module, so
g_status stayed 0 and RecvFileChunkV2 silently dropped every chunk, truncating
uploads to zero bytes. Add a once-per-process lazy InitFileUpload in the
COMMAND_SEND_FILE_V2 handler that mirrors the FileManager init; the destructor
deliberately does not Uninit so g_status remains 1 across reconnects.

Update the design doc to record the client-side change and correct the
upload_file description to state that sha256 is not returned (V2 has no
receiver-to-sender ACK; integrity is checked client-side and logged only).

Co-Authored-By: deepseek-v4-pro
2026-08-31 22:43:16 +02:00
yuanyuanxianganddeepseek-v4-pro 5c77f5ce14 Feature: Add download_file MCP tool (V2 protocol, SHA-256 verified)
download_file pulls a remote file or directory back to the controller over
the existing V2 file-transfer protocol. It reuses COMMAND_LIST_DRIVE to open
the file-manager sub-link, then sends CMD_DOWN_FILES_V2 so the Windows client
streams COMMAND_SEND_FILE_V2 chunks and a per-file COMMAND_FILE_COMPLETE_V2
SHA-256 checksum over its own authenticated sub-connection. The server routes
those two packet types into a new per-device FileTransferSession whenever a
download is pending, so the headless path never opens the GUI progress dialog;
the C2C and existing GUI branches are left untouched.

Files are written under a normalized local_dir, and every chunk filename is
resolved and verified to stay inside local_dir (directories included) to block
.. traversal; overwrite=false skips existing files and counts them as skipped.
One transfer per host (mutually exclusive with the one-shot pending registry),
a dedicated McpFileTransfer=0-by-default gate surfaced in the settings dialog,
and audit logging complete the change. upload_file remains future work.

Co-Authored-By: deepseek-v4-pro
2026-08-30 13:19:51 +02:00