Adds the 54th MCP tool, copy_files_c2c, which asks the source client to
push a set of files straight to another online client. Previously the only
way to move files between two clients was to download them to the server
machine and upload them again, so the data crossed the wire twice and
needed free disk on the server. With C2C the server only relays packets
and never parses or stores the payload.
Protocol. Two new ids in common/commands.h: COMMAND_C2C_SEND_FILES (174),
carrying the destination directory followed by a NUL-separated path list,
and TOKEN_C2C_SEND_RESULT (175), a fixed 45-byte result packet sent back
over the same sub-connection the transfer used. Clients advertise support
with the LOGIN_INFOR capability bit CLIENT_CAP_C2C_PATHS (0x0008), exposed
server side as Context::SupportsC2CPaths(). File transfer V2 already knew
how to push to dstClientID, so the destination side needed no change at
all; existing V2 receive paths keep working, and older clients simply do
not advertise the bit and are rejected with a clear error instead of
hanging.
Client. OnC2CSendFiles expands environment variables, collects directories
recursively, opens its own sub-connection (with sub-connection auth), and
runs FileBatchTransferWorkerV2 in a detached thread, then reports the
result on that same connection. Every early exit now reports a structured
failure rather than staying silent. The worker needs the process-level
InitFileUpload call that the receive path performs lazily, and a source
client may never have opened a file manager or received an upload, so the
initialization is factored into EnsureV2TransferInited() and called from
both paths.
Server. copy_files_c2c mirrors the existing upload tool: gates, id parsing,
capability checks, path validation, then a session keyed on the source host
that WaitC2CDone polls until the result packet arrives. The C2C relay
branch used to attach a CDlgFileSend progress dialog to the source's
sub-connection; NotifyProc then routed every later packet on that
connection to the dialog, which parsed the result packet as a V1 file
chunk and dropped it, so the tool always timed out even though the files
had arrived. IsC2CTransferPending() now suppresses dialog creation for
MCP-driven transfers only, leaving manual Ctrl+V transfers untouched.
Errors map to -32001 for a source-side transfer failure, -32010 for access
denied, -32009 for a missing path and -32002 for an offline destination.
Both hosts must be Windows: the destination is restricted too, because the
source embeds dst_dir in each V2 chunk name as an absolute Windows path and
only the Windows receiver applies it literally. A Linux or macOS receiver
never gets a target directory here (the clipboard flow sets one with
COMMAND_C2C_PREPARE, which this path does not send), so it would strip the
drive letter and write under / instead. Supporting that needs a prepare
packet carrying an explicit path plus an upgrade of those clients, so for
now the tool rejects them with -32005 rather than writing somewhere wrong.
Verified end to end on the Debug build: three files including a non-ASCII
name, an empty directory and a 3 MB binary arrived with matching SHA-256
in 3.2 s, a non-existent destination directory was created, and the
negative cases returned the documented codes. mcp_smoke.ps1 passes 41/41
with two new assertions and 27/27 in -SkipHost mode. Design notes, error
table and limitations are in docs/Mcp_FileTransfer_Design.md section 14
and docs/Mcp_Design.md section 15.
Co-Authored-By: deepseek-flash
List and query tools put only a human summary in content and kept the real
payload in structuredContent. Clients that hand just content to the model
(WorkBuddy does) therefore never saw a host id: search_hosts answered "1 host
matched" and every follow-up tool was out of reach, and guessed ids 1-3100
could never work because host ids are 64-bit snowflake values.
BuildResult now appends the serialized structuredContent as a second text
block, as the MCP spec recommends for tools with structured output. The append
sits in the single result choke point, so every tool in McpServer, McpMachine
and McpChat gains it, including future ones; empty action results such as
remote_mouse keep their bare "ok".
Tools whose text already carries the payload expose only the difference:
exec_command and terminal_exec add exit_code, get_keylog adds counters,
get_activity_history exposes records without the duplicated raw dump, and the
hosts file reader drops its copy of the content. The override rides in a $
key that BuildResult consumes and removes, so responses change only by the
extra block.
Verified on a Debug instance: list_all_hosts, search_hosts, get_server_status
and list_registry return parseable JSON in content[1] with ids intact, and
tools/mcp_smoke.ps1 -SkipHost passes 27/27 with four new assertions.
Co-Authored-By: deepseek-flash
Wire the four new failure tokens into MessageHandle and translate them
in the tool builders, so the three previously silent failures now return
a code an agent can branch on: list_services on a non-elevated client is
-32010 in well under a second instead of a 20 s timeout, list_files and
list_registry distinguish a missing path or key (-32009) from an empty
one, and download_file no longer waits for the stall watchdog when the
remote path does not exist. Access denied gets its own code, -32010, and
the win32 code is kept in the message for every case.
TakeRegError fills both registry wait flags in one packet because a
failing client sends no subkey or value packet at all. OnDownloadError
sets the session error without cancelling the file-manager sub-connection,
which stays owned by ClearFileTransfer. ListRemoteTopLevelNames treats
"not found" as "directory not created yet" so uploading into a fresh
directory keeps working now that the client reports it.
Also converge the error codes that were overloaded: a multi-monitor host
is a capability limit, not a parameter mistake, so remote_open reports
-32005 instead of -32008. The tool wait timeout moves from a compile-time
constant to McpToolTimeoutMs in settings.ini (default 20000, clamped to
1-600 s), which makes it possible to tune without a rebuild.
The smoke test gains the three reproducible negatives.
Co-Authored-By: deepseek-flash
The suite only exercised the happy paths, so a regression in the
negative paths -- unknown method, unknown tool, a missing required
argument, an oversized batch or a policy refusal -- would have gone
unnoticed. Add those checks alongside a section that reads the switches
from get_server_status, picks a feature that is actually turned off and
asserts its tool answers -32006; with every switch on it skips rather
than guessing, and with -AuditLog it also asserts the refusal shows up
as CALL_DENIED.
Document the full error-code table in section 12, including which codes
mean "retry with different arguments" and which mean "this is a policy
decision, retrying is pointless", and note that a batch call never
fails as a whole for per-host errors.
Verified against the Debug instance with McpKeylog temporarily set to
zero: get_keylog refused with -32006 and the audit log gained the
matching CALL_DENIED line, 34 checks passing; with the switch restored
32 pass, and 37 with a search path.
Co-Authored-By: deepseek-flash
Add four optional arguments to search_file that narrow the match list
after the client has returned it: min_size and max_size in bytes,
modified_after in either YYYY-MM-DD or YYYY-MM-DD HH:MM:SS form, and
name_only to keep just path and name per entry. The client still runs
the same name-matched recursive search, so these filters cut the
response size and the reasoning work on our side, not the scan time on
the host -- the summary sentence says so and totalAll keeps the
pre-filter count so a too-narrow condition is obvious. Invalid values
(negative sizes, an inverted range, a malformed timestamp) are rejected
with -32602 before any packet goes out.
The timestamp validator only accepted the ten-character form because
its shape loop never allowed the two colons, which rejected every
nineteen-character value; the loop now whitelists them.
Smoke tests cover the unchanged totalAll under a size filter, the slim
name_only payload and a rejected timestamp, for 33 checks when the
search path is supplied. Design notes are in section 11.4.
Co-Authored-By: deepseek-flash
list_online_hosts and list_all_hosts could only page, so finding "the
hosts in this group" or "the Linux ones" meant walking pages or falling
back to search_hosts, which has no client type filter and treats online
and offline hosts differently.
Both tools now accept group, os and client_type. They are substring
matches, combined with AND and case-insensitive over ASCII, matching the
semantics search_hosts already used, and the shared implementation keeps
the two tools from drifting apart. The filter runs before paging, so
total counts the matches and totalAll keeps the pre-filter size, and the
summary switches to the "matches" wording with a trailing line naming
the unfiltered size - a mistyped condition then shows up immediately
instead of silently returning nothing.
Offline hosts carry no clientType in their stored record, so a
client_type filter never matches them; the tool description says so and
points at os for that case.
Verified on the Debug instance: client_type=exe matches the single EXE
host while client_type=lnx matches nothing and still reports totalAll=1;
list_all_hosts with group=default matches all 3161 recorded hosts and
splits them into 1 online and 3160 offline, and os=zzz matches none. The
smoke test gains two checks and passes 28/28.
Co-Authored-By: deepseek-flash
Answering "did my rebuild actually take effect" or "why was that tool
refused" used to mean reading list_online_hosts and get_audit_log and
inferring the rest. A single read-only call now returns the server's own
state: brand and version, the exe link time (taken from the file's last
write, which unlike __DATE__ reflects the whole build), how long the
process has been up, the address and port MCP is actually listening on,
every MCP switch, online and offline host counts, the number of sessions
in flight per family, and how many source IPs are currently blocked.
The bind and port are recorded by Start rather than re-read from the
configuration, so the tool reports what the listener really got. Session
counters take each subsystem's lock in turn and release it immediately,
so the numbers are an estimate of one moment, not a consistent snapshot.
Nothing sensitive is exposed: the token and the command whitelist never
appear, and the switches are reported as booleans only.
The tool is registered as read-only, non-destructive, idempotent and
server-local, which brings tools/list to 53 entries. The smoke test gains
three checks for it, including one that fails if a token-shaped field
ever appears in the output.
Verified on the Debug instance: the summary line reports version, uptime
and listener correctly, sessions.terminal goes 0 to 1 while a persistent
terminal is open and back to 0 after terminal_close, and the smoke test
passes 26/26.
Co-Authored-By: deepseek-flash
get_audit_log used to hand back every entry in the main window's message
mirror on each call. The mirror is a 1000-entry ring buffer, so a busy
server returned a lot of text the caller never looked at, and there was
no way to ask for just the MCP entries or just the ones mentioning a
particular subject.
The tool now takes the same limit/offset pair as the other list tools
and two optional substring filters: type matches the type column and
keyword matches the message text, both case-insensitive. Filtering runs
before paging, so total counts the matches while totalAll keeps the size
of the whole mirror, and the summary line adds the pre-filter count when
a filter is in use so a typo is easy to spot. The GBK to UTF-8
conversion moved into the filter loop so the comparison happens between
strings in the same encoding, still under the dialog's critical section.
The output schema gains total/totalAll/offset/limit/hasMore, and the
smoke test now asserts the paging fields, the limit bound and an empty
result for a filter that cannot match, bringing it to 23 checks.
Verified on the Debug instance: limit=2 returns entries 1-2 then 3-4
with hasMore set, offset=999 reports the out-of-range text, type=mcp
matches the "MCP命令执行" entry, type=提示 matches both hint types and
keyword=监听 matches the listening-port line.
Co-Authored-By: deepseek-flash
Cap MCP request bodies at 2 MB, set a 15 s idle read timeout and a 60 s
write timeout, and give httplib an explicit 32-thread pool: long tools
such as chat_wait hold a worker for up to 55 s, and the default pool of
8 to 15 left other callers queued.
Every tool returned by tools/list now carries readOnlyHint,
destructiveHint, idempotentHint and openWorldHint. The table is
per-tool; anything not registered defaults to destructive so a new
write tool cannot silently look harmless. Read-only tools are forced
to destructiveHint=false.
get_host_detail appends the technical fields the host store already
holds (cpuCores, memoryGB, systemBits, programBits, user, isAdmin,
installTime, expiredDate, monitors, exeVersion, clientPath, pid,
publicIp). The JSON writer is pinned to 15 significant digits so
memoryGB renders as 27.8 instead of 27.800000000000001. list hosts
output is unchanged.
Add host_set_remark and host_set_watch_level. Both validate the host
against the store, are refused in readonly mode, repaint the affected
row, and are audited without recording the value written.
Add search_file, which drives the client file-manager search channel
and returns paged results. The root path is normalized before sending:
the client enumerates with wsprintf("%s\*.*"), so a trailing
backslash produced C:\*.* and FindFirstFile failed, returning zero
hits instantly. The client only searches recursively, so non-recursive
requests are filtered server-side by comparing the parent directory.
Collection stops at 5000 records or 4 MB and the client is told to
stop; on timeout the partial results are returned. Search result
packets are never closed early: the sub-connection stays open until
TOKEN_SEARCH_FILE_FINISH, because the client's search thread holds a
pointer into the file manager object.
Batch reads report a skipped counter and are bounded to 50 ids and a
50 s deadline.
Add tools/mcp_smoke.ps1, a read-only end-to-end smoke test that asserts
auth rejection, the payload limit, annotation coverage, paging fields
and the main read tools. It takes the token from the environment and
never prints it.
Document all of the above in docs/Mcp_Design.md section 10, including
the client-side MAX_PATH stack overflow that a deep search_file call
can trigger, together with the workaround of searching shallow
directories.
Co-Authored-By: deepseek-flash