Adds "Advanced -> Remote desktop tuning" with three independently
checkable items, all enabled by default:
x264 bitrate cap (VBV) TUNING_X264_VBV 0x1
GDI capture: no slice delay TUNING_GDI_NO_SLEEP 0x2
Send pacing FPS floor TUNING_PACE_FPS_FLOOR 0x4
Unticking an item clears its bit and restores the pre-commit behaviour
exactly, so the escape hatch is one click per measure -- no rebuild, no
config edit. Each bit is independent; a problem with one does not force
turning all three off.
Plumbing
--------
Menu state -> [settings] Tuning* -> CMy2015RemoteDlg::GetScreenTuningFlags()
-> CScreenSpyDlg::SendScreenTuning() (right after TOKEN_BITMAPINFO)
-> CMD_SCREEN_TUNING = 178 [cmd:1][flags:4 LE]
-> CScreenManager::OnReceive -> m_nTuningFlags -> ScreenCapture::SetTuningFlags
Why it is safe to send to old clients: CScreenManager::OnReceive has no
default branch in its switch, so an unknown command falls straight out
(verified). 178 was unassigned (177 = COMMAND_SET_PROTO, 199 =
TOKEN_DECRYPT), and the enum re-anchors explicitly so nothing auto-
increments onto it.
Flags are sent even when all-zero on purpose: the client's flag lives in
CScreenManager, which survives closing and reopening the remote desktop
window on the same connection. Without the zero send, unticking the menu
would leave the previous flags in effect.
Per-measure notes
-----------------
VBV: capped CRF (peak = target, 0.5s buffer, init 0.9). The hardware
paths already cap via rc_max_rate (1.5x, 1s buffer); this is tighter and
only affects x264. After an IDR the buffer drains and takes up to 0.5s
to refill, so a brief quality dip follows every keyframe -- if that shows
up, relaxing to 1.5x/1s would match NVENC/QSV.
GDI: keeps the 50-line BitBlt slicing (large single BitBlts hit driver
limits) and only drops the 5ms sleep between slices -- 1080p is 22 slices
= a forced 110ms per frame against a 50ms budget at 20fps.
Pacing: clamps s0 to 2x the base interval instead of 4x (2fps -> 4fps),
taken as max(2x base, 1000/MaxFPS) so it never exceeds the configured
MaxFPS. The growth/decay code itself is untouched. This one works against
the loop's own congestion signal, so it is the first to untick if a bad
link feels laggier rather than smoother.
SetTuningFlags only rebuilds the encoder when TUNING_ENCODER_BITS
(currently just VBV) changes -- the GDI and pacing bits are read live by
the capture and send threads, and rebuilding for them would drop an IDR
and visibly flash the picture.
Defaults: the on-by-default value lives in the third argument of
THIS_CFG.GetInt(), which only applies when the key is absent. A machine
that already has an explicit 0 keeps it, so the flip is not retroactive
and a test machine can end up with a mixed state.
Verified on the Debug build: with no Tuning* keys all three items start
checked; unticking VBV alone leaves the other two checked and survives a
restart; en_US/de_DE/zh_TW translations all resolve. Not yet measured end
to end on a real remote desktop session.
Screen frames are captured without the pointer composed in (GDI SRCCOPY,
DXGI), so browsers only ever knew the cursor's shape index and could show a
cursor just in control mode, where the local pointer stands in for the remote
one. Both servers now relay the cursor position that every per-frame header
already carries: shape changes go out immediately, position changes at most
every 50 ms, and an unchanged cursor is re-sent once a second so a viewer that
joins while the pointer is idle still learns where it is.
The page hides the local pointer and draws the remote cursor at its true
position while out of control mode; entering control mode restores exactly the
old behaviour (remote-shaped CSS cursor on desktop, touchpad pointer on touch).
A server that never sends x/y leaves the page on its previous fallback.
The C++ server broadcasts from the per-frame path, so header-only frames keep a
static desktop's cursor fresh; the Go hub dedups and throttles before fanning
out. Tests cover the throttle/refresh rules and the relayed payload.
Co-Authored-By: deepseek-flash
The macOS client derived its logical screen size from [NSScreen mainScreen]
while it captured CGMainDisplayID. In clamshell mode with an external display
the former can still report the disabled built-in panel (1470x956) while the
captured frame is 1280x1024, so every injected point was scaled by
logical/encode and drifted linearly with the distance from the top left
corner, independently on each axis. Take the logical size from
CGDisplayBounds of the captured display instead, and report the same bounds
in the login resolution.
For hosts that still run the old client, the remote desktop dialog gains a
per-host mouse calibration in its system menu. The factors are stored by
client ID together with the reported resolution and the captured frame size,
so they stop applying once the client is upgraded or a different display is
captured, and come back automatically when the original display returns.
When no calibration has been saved the dialog pre-fills the factors from
frame/reported, but only for macOS clients, because the other clients derive
their conversion from the captured display itself and a mismatching report
there would be misleading.
Co-Authored-By: deepseek-flash
Add keyboard-shortcut (Ctrl+C / Ctrl+X / Ctrl+V) text clipboard transfer
between the browser and the remote desktop, reusing the clipboard protocol
that already exists in the native viewer (COMMAND_SCREEN_GET_CLIPBOARD=24,
COMMAND_SCREEN_SET_CLIPBOARD=25, TOKEN_CLIPBOARD_TEXT=118) so the client
needs no change.
Local -> remote: pressing Ctrl+V reads the browser clipboard, pushes it to
the remote clipboard (UTF-8 -> GBK, matching the client's CF_TEXT/ANSI
handling) and then synthesizes a remote Ctrl+V so the pasted text is the
newly delivered one.
Remote -> local: Ctrl+C or Ctrl+X is forwarded to the remote as usual and,
after a short delay, the remote clipboard is pulled back and written to the
browser clipboard for a later local Ctrl+V.
Both the MFC and Go servers get the same three clipboard signaling paths
(clipboard_set, clipboard_get, clipboard_text) so the shared single-page
frontend behaves identically on either backend.
Co-Authored-By: deepseek-v4-pro
Add an "高级 (Advanced)" menu after "其他 (Other)" whose
"远程桌面质量等级 (Remote Desktop Quality Levels)" item opens a dialog to
edit the six preset QualityProfile levels (max FPS, max width, codec
algorithm, bitrate). The dialog edits a working copy in a full grid with
per-field validation and a restore-defaults button; on OK it persists the
values to the [quality] INI section.
The server stays authoritative: LoadQualityProfilesFromCfg loads the saved
levels at startup (falling back to GetQualityProfile defaults), and
ScreenSpyDlg now sends CMD_QUALITY_PROFILES from GetQualityProfileCfg so
new remote-desktop sessions transmit with the configured parameters. Added
en_US/de_DE/zh_TW translations for the menu and dialog strings.
Co-Authored-By: deepseek-v4-pro
When an online host has a remark set in the client list, use it in place of
the IP in the remote desktop ("远程桌面控制") and virtual screen ("远程虚拟屏幕")
dialog titles, falling back to the IP when no remark is present.
Add a GetTitleHostName() helper to both dialogs. CScreenSpyDlg resolves the
remark through its parent dialog's client map, while CHideScreenSpyDlg uses
the global g_2015RemoteDlg pointer; each falls back to m_IPAddress when the
host has no remark.
Co-Authored-By: deepseek-v4-pro
The view-mode "forbidden" cursor was applied with SetClassLongPtr(GCLP_HCURSOR),
which mutates the cursor for the whole window class instead of the single dialog
instance. Opening a second remote-desktop dialog without remote control overwrote
that shared class cursor with IDC_NO, so the already-controlled dialog also began
showing the forbidden icon even though it remained operable.
Move the view-mode cursor decision into OnSetCursor, which Windows routes per
window, and remove the now-unused class-cursor assignments. Remote-control mode
and the remote cursor-shape path are left unchanged.
Also drop the dead m_hRemoteCursor member and the leftover GetIconInfo block
(which leaked hbmMask/hbmColor in ScreenSpyDlg), plus the now-unreferenced
m_bMouseTracking flag.
Co-Authored-By: deepseek-v4-pro
Two changes to reduce unnecessary CScreenSpy restarts when connecting:
1. Client (ScreenManager.cpp): Initialize CScreenSpy with bitrate from
the locally-saved quality profile, so CMD_QUALITY_LEVEL arriving from
the server (same bitrate as default) hits SetBitRate(3000)==3000 and
skips the restart instead of comparing against the hard-coded 0.
Also fixes QualityLevel init to use the already-computed `quality`
variable (which honours the QUALITY_DISABLED override when algo!=NUL)
rather than re-reading the cfg key a second time.
2. Server (ScreenSpyDlg.cpp): Only send CMD_SCREEN_SIZE strategy=2 when
the session is in QUALITY_ADAPTIVE mode and a cached maxWidth exists.
Fixed quality levels already carry resolution via CMD_QUALITY_PROFILES,
so unconditionally sending CMD_SCREEN_SIZE caused a second restart when
the screen spy was still rebuilding from the first one.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Server: clamp web session adaptive quality to H264-only levels (>=Good) in EvaluateQuality and ApplyQualityLevel; Ultra/High (DIFF/RGB565) caused the browser to freeze ~1 min into a session
- Server: move session-type detection to the top of ScreenSpyDlg::OnInitDialog and skip SetWindowPlacement/EnterFullScreen for hidden web sessions, eliminating the MFC dialog flash on web-triggered opens
- Linux client: default QualityLevel from QUALITY_ADAPTIVE to QUALITY_GOOD to match Windows/macOS so the server's adaptive controller doesn't auto-upgrade to non-H264 algorithms
- Web: clear the floating quick-action toolbar on fullscreen exit so its row of buttons (RDP reset / Mouse / Close) doesn't stay pinned to the top of the page
- Web: route F11 to the remote in control mode instead of toggling local fullscreen
- Web: route Esc to the remote in control mode via the Keyboard Lock API instead of exiting native fullscreen
Fixed two bugs when closing ScreenSpyDlg with file transfer dialogs:
1. Access violation (0xC0000005): CDlgFileSend self-destructs via
PostNcDestroy (delete this) when closed, leaving dangling pointers
in m_FileRecvDlgs map.
2. Double-free: Original code called DestroyWindow() then delete,
but DestroyWindow already triggers delete this via PostNcDestroy.
Solution:
- Store {HWND, pointer} pairs instead of raw pointers
- Check HWND validity with IsWindow() before accessing pointer
- Use SendMessage(WM_CLOSE) to let dialog self-destruct safely
- Always erase map entries to prevent accumulation of invalid data
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>