Commit Graph
9 Commits
Author SHA1 Message Date
yuanyuanxianganddeepseek-flash 951b4072e5 Feature: Embed the master's TLS certificate in generated clients
When the server has TLS enabled, the builder can now bake its certificate into
the client it produces, so a distributed client speaks TLS on its very first
connection instead of waiting for the anchor to be pushed after a plaintext
login. The dialog gets a checkbox (IDC_CHECK_TLS_ANCHOR) that is only enabled
for payloads and protocols where an embedded anchor makes sense; the choice is
remembered even when the control flips to disabled and back, so switching
protocols cannot silently undo a deliberate opt-out. Every label variant stays
short enough to fit the 196 DLU field, including the German ones. A template
that predates the anchor block no longer aborts generation: it warns, clears
the checkbox and produces a plain client, so a master upgraded without
rebuilding the ghost/ServerDll resources does not block every build.

The certificate lands in a fixed 4 KiB block (magic, version, length, FNV-1a
hash, master address, PEM) carved out of the payload at build time. The client
reads its trust anchor from four sources in order: the tls_disabled marker,
the certificate the server pushed into the registry, a PEM file next to the
executable, and finally the embedded block.

The embedded block only applies to a connection whose target matches the
master recorded at generation time, compared as an address set: an exact
string match when only one address is configured, or an intersection of
resolved IPv4 addresses otherwise. A transferred, shared or parallel instance
falls back to the old plaintext first-connect path instead of pinning itself
to a certificate it can never verify. That decision is made per connection,
not per process: shared and parallel instances are threads inside a single
client process, so a process-wide flag let whichever instance connected first
decide for all of them, and the first load of the TLS state cached that answer
for good. The TLS layer now keeps two cached states (embedded anchor allowed,
and not allowed), picks one per handshake, and reports the anchor source of
that handshake for the login capability bit. Matching by resolved address also
keeps parallel mode working, where the connection goes to the single IP the
domain pool selected while the configured master is a domain or a list.

Server side, generated and updated payloads get the block written in place;
the client reports the capability bit on login so the console can tell which
hosts are already TLS-only on first connect. Loading the anchor decodes every
PEM block in the chain rather than just the leaf, and an anchor that exists
but fails to load keeps the old fail-closed behaviour. A pushed anchor only
reconnects when the transport of the live connection actually changes, judged
against that connection's own target rather than the process-wide switch.

This was verified end to end against a freshly generated client with an empty
registry: the first connection was a TLS 1.2 ClientHello 0.2 s after start,
and a four-certificate fullchain loaded all four blocks. Re-verified after the
per-connection rework with the anchor block patched into a debug client: with
a matching master the first bytes are a ClientHello, with a foreign master the
client logs the skip and sends plaintext, and a domain master resolves to the
IP it connects to and still matches. A master domain that no longer resolves
falls back to plaintext within a second and is not looked up again for a
minute, instead of stalling every reconnect on a DNS timeout while holding the
lock the certificate verification needs.

Co-Authored-By: deepseek-flash
2026-11-01 20:40:02 +01:00
yuanyuanxianganddeepseek-v4-pro e6b4fe3a85 Fix: reissue client_id on clone collision and harden V1 file-transfer command
撞 ID 的克隆机(同镜像 MachineGuid 相同导致 client_id 相同)此前会被服务端暂存为
替补、永远无法转正,从而不显示在主机列表。现在服务端检测到「client_id 相同但主机名
不同」时,主动下发 COMMAND_REGEN_CLIENT_ID,客户端在旧 ID 基础上掺随机 UUID 重算后
重连,以新 ID 正常上线;触发条件仅看主机名,排除 IP 漂移与纯用户名变化,避免误伤
正常重连的机器。

同时加固 V1 服务端→客户端文件传输:COMMAND_GET_FILE 指令的一次性 md5 令牌绑定登记
时的客户端源 IP(PutCmd/PopCmd 均带 peerIP),防止异常客户端冒用;并对指令包增加边界
校验(len 与 NUL 结尾),杜绝无 NUL 包导致的越界读。

Co-Authored-By: deepseek-v4-pro
2026-10-17 09:29:33 +02:00
yuanyuanxianganddeepseek-v4-pro 99e3bcbc6d Feat: Per-client TLS transport toggle (TLS column + remote enable/disable)
Add a per-client TLS transport toggle controlled from the server, using the
presence of the client's trust-anchor certificate in the registry as the
single source of truth (no separate tls_enable flag).

- Client reports its TLS status via a new RES_TLS token (cert present -> 1)
  appended to LOGIN_INFOR's reserved field.
- Server online list gains a "TLS" column after the permission column.
- The "experimental features" right-click menu gains "TLS传输" / "取消TLS"
  with confirmation and a guard that prompts (instead of sending) when the
  server has no TLS certificate ready.
- New COMMAND_TLS_ENABLE / COMMAND_TLS_DISABLE (166/167): the server pushes
  its cert PEM into the client registry settings\tls_cert (enable) or deletes
  it (disable). The client picks this up on next startup via the existing
  ReadTrustAnchor logic, so the switch is non-live by design.
- Icons and en_US/zh_TW/de_DE translations for the new menu items.

Co-Authored-By: deepseek-v4-pro
2026-10-16 07:04:54 +02:00
yuanyuanxianganddeepseek-v4-pro 77b688c981 Feat: Fold hostname into client ID and log clone-ID collisions
Cloned miniPC images share the same MachineGuid, so their client_id
collides and only one host appears in the list. Fold the hostname into
the V2 client-ID hash so hosts with distinct names no longer collide.
Already-persisted client IDs are unchanged: they recompute only after
the settings/client_id registry value is cleared.

Server side, when a login reuses an existing client_id but the hostname,
IP, or username differs, emit a WARN diagnostic before assigning the
connection to the standby list. Observation-only, no behavior change.

Co-Authored-By: deepseek-v4-pro
2026-10-15 19:43:58 +02:00
yuanyuanxianganddeepseek-v4-pro d15cd77a28 Fix: Decode geographic location as UTF-8 across client and server
Geographic location (city, country) from the geo APIs is UTF-8, but the client
and several server paths converted or stored it in the system ANSI code page,
turning umlauts ("ö"/"ä") into "?" or GBK mojibake ("B枚blingen"). Keep the
value UTF-8 end to end: the client caches it as UTF-8 and re-queries once after
an upgrade (keyed by __DATE__, the app's version convention), while the server
stores and displays it as UTF-8 in the online list, the activity log, the
client-info export, JSON/email payloads and search.

Also add a confirmation prompt before opening a remote chat from the toolbar,
with German, English and Traditional-Chinese translations.

Co-Authored-By: deepseek-v4-pro
2026-10-10 13:58:38 +02:00
yuanyuanxiang 5a20355547 Improve: AuthKernel use the machine id as client identify id 2026-06-06 14:54:42 +02:00
yuanyuanxiang 70354e244c Improve: Add adaptive screen algorithm option and set to default
Fix: send Windows client path/username as UTF-8 (consistent with CLIENT_CAP_UTF8), keep client ID stable across upgrade
2026-05-09 23:13:24 +02:00
yuanyuanxiang 2c5b5ad628 Improve: client/server - stable client ID via MachineGuid+path (V2) 2026-05-06 21:32:06 +02:00
yuanyuanxiang 5a325a202b Init: Migrate SimpleRemoter (Since v1.3.1) to Gitea 2026-04-19 22:55:21 +02:00