Commit Graph
9 Commits
Author SHA1 Message Date
yuanyuanxiangandQoder 51747dc0ea Feature: Add on-demand TLS transport with hot-switch to the Android client
Reuse the Linux OpenSSL TlsChannel implementation (platform guard widened
to __linux__); the trust anchor lives in the app-private filesDir, injected
via TlsSetAnchorDir in nativeInit before the connection thread starts.
COMMAND_TLS_ENABLE/DISABLE save/remove the anchor, hot-reload and reconnect
only when the transport actually changes, so the master menu takes effect
within seconds without restarting the app. Login reports RES_TLS, refreshed
before each re-login. The reconnect flag is consumed before the drop check
and cleared before reconnecting so a switch racing a disconnect cannot
cause an extra reconnect/login cycle.

Cross-compile OpenSSL 3.5.0 per ABI with build_openssl_android.sh (NDK
clang + MSYS2 perl/make), integrated into build_android_libs.ps1
(-OpenSslOnly). Static libs and per-ABI headers are tracked like the
existing libzstd/libsign prebuilts; --exclude-libs keeps OpenSSL symbols
private to libyama.so, isolated from the Java-layer Conscrypt.

Co-Authored-By: Qoder <noreply@qoder.com>
2026-11-11 11:56:32 +01:00
yuanyuanxianganddeepseek-flash 36618b0ad0 Feature: Install Android APK updates pushed from the master
The master now sends COMMAND_UPDATE to Android hosts: it picks a
"Build Client -> Android" APK, checks the ZIP magic and that the package
carries this master's fingerprint, then sends [cmd][size][APK][xxh64].
The client verifies length and hash, writes filesDir/update.apk and
commits a PackageInstaller session, so the system installer still asks
the user to confirm - an app cannot replace itself silently. Write and
hash failures come back over TOKEN_CLIENT_MSG, so the master sees why
nothing happened instead of a silently dropped packet.

Sending the wrong file is what the fingerprint check guards against: a
template without the master id installs fine and then cannot connect
back. "Send anyway" is offered only after spelling that out, and the
client advertises CLIENT_CAP_APK_UPDATE (0x0400) so an old APK gets
"install a new build once by hand" instead of a packet it would discard.

Also report the real versionName/versionCode at login instead of the
hardcoded v1.0.0, add android/tools/verify_update_apk.py (pre-send check
of size, ZIP_STORED libs, ABI, package, versionCode and the decrypted
CONNECT_ADDRESS, which it still locates after BuildDlg rewrote szFlag),
and translate the nine new strings in en_US, zh_TW and de_DE.

Verified on the emulator and against the live release server: generate,
sign, send, install, and the device reconnects and re-grants screen
capture. Language packs are GBK and were appended as bytes.

Co-Authored-By: deepseek-flash
2026-11-11 00:53:29 +01:00
yuanyuanxianganddeepseek-flash 2cbed0dcdf Fix: Report process uptime and harden the login reserved list
The "启动信息" elapsed time was computed by subtracting a client-formatted
wall-clock string from the master's own local time. Windows clients send their
local time, Linux/Android/macOS send Beijing time, so a host whose clock runs
ahead of the master (UTC+8 clients on a UTC+1 master, a fast CMOS clock) gave a
negative difference that was clamped to 0s — permanently, for that host.

Add RES_UPTIME to the login reserved list: the client reports its process
uptime in seconds, a difference between two readings of the same clock, so
timezone and clock skew cancel out. The master adds the connection's alive
time to get the current value, and keeps the old string path as the fallback
for clients that do not send the field. That fallback now also treats MAC as
Beijing time, which was simply missed.

AddReserved() now goes through one bounds-checked append. The separator used
to be written without any length check (an overflow aborts the client, which
installs no invalid parameter handler), and an over-long value now leaves an
empty slot instead of dropping its separator, so positional lookups cannot
shift.

Verified with an ASan/UBSan test over the encoding boundaries and Debug builds
of the client and the master. The Linux/Android/macOS clients only append the
same field at the end of the list; they were not compiled here.

Co-Authored-By: deepseek-flash
2026-11-08 21:49:20 +01:00
yuanyuanxianganddeepseek-flash 46f4bf2dfb Fix: Make the WebSocket transport reachable and bounded on every platform
The POSIX clients were built without a connection config - Linux, macOS and
Android all construct IOCPClient without the injected CONNECT_ADDRESS - so
ConnectServer saw protoType -1 and quietly dialled the master port in plain
TCP. Setting protoType to WS in their settings did nothing and logged nothing,
and since CLIENT_CAP_PROTO_SWITCH is Windows-only the server could not move
them either. Give the client a SetDefaultProto() for that construction path
and call it from all three mains before the reconnect loop, with a one-shot
log when neither a conn nor a default protocol is available so the silent
fallback becomes visible next time.

Bound what a peer can make the client read. ReadHeader accepted the 8-byte
extended length and rejected only the sign bit, so a frame length of nearly
2^63 kept the connection streaming into a frame that would never end - alive
but never delivering another packet. Cap single frames at 256 MB, the same
value ServerWsSession already applies to client frames, and drop the
connection past it; real traffic is far below that.

Stop Reset() from writing the receive thread's frame state. Disconnect() can
run from the heartbeat or command thread, not just the receive thread, so
Reset() now only flips the atomic ready flag and a new ResetFrames() clears
m_remaining, m_masked and m_maskPos from Handshake() alone, before the
receive thread starts reading the socket. Those fields keep a single owner
without adding a lock to the receive hot path.

Finish a dead WS session instead of leaving it to the keepalive timer. When
the session had closed but wsState was still WS_Ready, sends were dropped and
nothing woke the pending recv, so a peer that closed and then went quiet held
the context for the 3-minute keepalive. shutdown() the socket there so the
recv returns zero bytes and the normal -2 teardown runs; RemoveStaleContext
would deadlock against the caller's own IoRefCount and can hand back a reused
context.

That shutdown only finishes the connection if a zero-byte read still tears it
down, and on the plain path it no longer did. DispatchPlain answers an empty
buffer with "handled", so a peer's FIN left the connection in CLOSE_WAIT
until keepalive - holding an IOCP context, a pending WSARecv and a rate-limit
slot - where the pre-WS code called ParseReceivedData and tore down at once.
Restore that teardown on the TLS_Plain branch, matching the other two. Checked
against a Debug server: a plain socket that half-closes used to sit in
CLOSE_WAIT with the peer's recv timing out, and now disappears immediately
with recv returning zero.

Two smaller cleanups from the same review. Give the WS upgrade its own prefix
buffer (wsPreClassify) instead of borrowing the TLS sniffer's, which was
serially reused for two state machines and read as if it were one. And stop
deriving the build dialog's protoType from the combo box index: items now
carry the protocol value as item data, keyed off the index AddString returns,
so inserting an option in the middle can no longer write the wrong number into
the generated client without any error. ApplyProtoSwitch loses its bool
return, which contradicted its own side effects and was ignored by every
caller.

Co-Authored-By: deepseek-flash
2026-10-30 19:15:14 +01:00
yuanyuanxiang d7408ad4df Feat: Client build dialog support building Android application 2026-06-25 17:48:45 +02:00
yuanyuanxiangandClaude Sonnet 4.6 5296e534ed Fix: Android client stops service when server sends BYE (delete client)
ConnectionThread now calls CaptureService.onNativeExit() via JNI on exit
when g_bExit == S_CLIENT_EXIT (server-initiated). The Java side posts
stopSelf() on the service handler. Guard: instance is null in the
user-initiated teardown path (onDestroy nulls it before nativeStop),
so onNativeExit is a no-op in that case.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-06-25 17:38:01 +02:00
yuanyuanxiangandClaude Sonnet 4.6 5a1430e904 Feat: Android client device grouping with persistent group name
- szPCName sent as "model/groupName" format matching Linux client
- CMD_SET_GROUP handler updates g_SETTINGS.szGroupName in memory
- Group name persisted to filesDir/yama_group; survives process restart
- LoadGroupName() at startup overrides build-time patch value if file exists

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-06-25 17:38:01 +02:00
yuanyuanxiang 218ee4f43d Feat: TV remote control via D-pad focus navigation using AccessibilityService 2026-06-24 22:31:14 +02:00
yuanyuanxiang 45553ec5b6 Feat: Android client Phase 0-3 full implementation 2026-06-21 23:00:05 +02:00