The proxy mapping dialog ("代理映射") depended on HP-Socket: three vendored
SDK headers (4787 lines) plus #pragma comment(lib) lines pulling in four
prebuilt lib/DLL variants, all guarded by ENABLE_HPSOCKET, which has been 0
since the initial commit -- so the feature was dead code that only answered
"This feature is unavailable due to HPSocket disabled" and no build of this
repository ever ran it.
Replace that dependency with a small listener built on blocking sockets and
select, which is the same approach the client's CProxyManager and the
server's own SimpleWebSocket already take. The accept loop polls every
200 ms so Shutdown can return without closing a socket another thread is
selecting on, and each accepted connection gets a relay thread that only
has to recv and hand bytes to the dialog. Connection sockets are closed by
their relay thread alone; Disconnect only raises a stop flag and calls
shutdown() under the same lock the relay thread takes before closesocket,
so a recycled handle is never shut down by mistake. Finished threads are
parked in a graveyard and joined by the accept thread, which keeps the
thread handle count flat across open/close cycles.
ProxyMapDlg keeps the SOCKS5 state machine it had, but now stores its
per-connection state in a map keyed by the connection id instead of
relying on HP-Socket's GetConnectionExtra, and it logs through a posted
window message rather than touching CEdit from worker threads. The two log
panes in IDD_PROXY are ES_READONLY, so EM_REPLACESEL was silently ignored
(the original code had the same latent bug); the dialog now keeps the pane
text itself and writes it with SetWindowText, bounded to 256 KB per pane.
The vcxproj and filters lose the three SDK headers, and the dialog gate in
OnOpenProxyDialog loses its ENABLE_HPSOCKET check.
Tested against a Debug server with a Debug Windows client on the same
host: curl through the listener succeeds over both the IPv4 and the
hostname ATYP paths, a 4 MB transfer arrives byte-identical, a refused
target maps to SOCKS5 reply 5, killing the client mid-transfer closes the
dialog and releases the port, and five open/close cycles leave the server's
handle and thread counts unchanged.
Co-Authored-By: deepseek-flash
MCP was served by a plain httplib::Server, so remote clients could only use
cleartext HTTP. YAMA now terminates TLS itself: a small front-end owns the
MCP port, sniffs the first byte and either runs a Schannel handshake and
forwards the decrypted bytes or passes plaintext through, with httplib
moving to a loopback-only internal port. No OpenSSL, no frp change, existing
local HTTP clients keep working, and an unusable certificate fails closed
instead of falling back to cleartext.
The identity loader grew the two things a public certificate needs. ECDSA
(P-256/P-384/P-521) keys are persisted by importing PKCS#8 with an
NCRYPTBUFFER_PKCS_KEY_NAME parameter, the only route MS Software KSP
supports for Schannel; RSA keeps its old export-and-repersist path.
Fullchains are accepted, and the intermediates are added to the current
user's CA store so Schannel, which builds chains only from system stores,
actually sends them. The shared handshake also now buffers a full TLS
record before the first AcceptSecurityContext, which a partial ClientHello
would otherwise poison (SEC_E_UNKNOWN_CREDENTIALS).
Session resumption exposed a second trap: when a client resumes a session,
ChangeCipherSpec, Finished and the first application record arrive in one
segment and AcceptSecurityContext leaves the application record pending in
the session. Nothing drained it, because both callers only decrypt when new
ciphertext arrives, so the request waited until the peer gave up (the MCP
front-end saw no request at all and the client reported "fetch failed
(other side closed)"; the device port had the same hole behind its
occasional login timeouts). Decrypt now drains pending data on len == 0, and
both the front-end and the device port's handshake thread use it before
entering their receive loops.
Configuration is McpHttps, McpCertPath, McpKeyPath and McpInternalPort, the
first three editable in the MCP settings dialog (the certificate rows stay
greyed out until HTTPS is enabled and saving rejects missing files).
Verified with a real Let's Encrypt ECDSA fullchain (53 tools over TLS, 401
with no or bad token), a local three-level chain whose intermediate was
absent from the store, Node 24's fetch on a resumed session (initialize,
notifications/initialized and tools/list all complete), and the device
port's RSA handshake as a regression check. Details in docs/Mcp_Design.md
section 13.
Co-Authored-By: deepseek-flash
Add chat_open, chat_send, chat_wait and chat_close to the MCP tool set,
behind a new McpChat switch that defaults to off and is independent of
the read-only switch. The tools reuse the existing client chat link: the
main connection sends COMMAND_CHAT, the client opens a sub-connection
with TOKEN_CONN_AUTH and TOKEN_CHAT_START, the server answers with
COMMAND_NEXT_CHAT, and both directions then carry raw CP936 text.
Sessions are per host and held in shared pointers under their own mutex,
so a waiting chat_wait survives a close or a dropped sub-connection, and
chat_send is serialised per session. Text is converted strictly between
UTF-8 and CP936: invalid UTF-8, characters GBK cannot represent (emoji,
accented letters) and messages over the client's 4000-byte buffer are
rejected with -32602 instead of being mangled. A one-second settle delay
after the sub-connection binds keeps the first message from reaching the
client before its chat window exists.
The routing hooks run before the host-management hooks in MessageHandle
and clear the route in OfflineProc before the context leaves the list. A
five-second tombstone absorbs a late TOKEN_CHAT_START after a timeout, so
a failed chat_open does not pop the MFC chat dialog. Idle sessions are
swept on every tool call, and audit entries record the session id and
byte counts only, never message bodies.
The settings dialog gains the chat checkbox and the translated labels
for all three languages, and the strict UTF-8 to CP936 helpers move from
McpMachine.cpp to McpInternal so both tool families can share them.
Co-Authored-By: deepseek-flash
Expose the online-list TLS column through list_online_hosts, search_hosts
and get_host_detail. The value comes from the flag the client reports at
login, so old clients always read false.
Add list_network_connections and kill_network_connection on top of the
connection manager sub-connection protocol. The kill path matches the
original 110-byte record instead of rebuilding addresses, supports a dry
run, refuses UDP/IPv6 targets, and verifies that the quadruple really
disappeared instead of assuming success.
Add a host_* family backed by the machine manager protocol: ten read
tools covering every tab of the host management dialog, and four
recoverable write tools for process freeze/thaw, window restore/hide/
maximize/minimize, service start/stop/pause/continue/restart, and
scheduled task run/stop. Every write re-reads the snapshot before sending
and re-checks afterwards, reporting -32009 for stale targets rather than
acting blindly. The family is gated by McpMachine, the risky subset by
McpMachineDangerous, and writes additionally require read-only mode to
be off.
Route managed sub-connections from MessageHandle and OfflineProc, keep
the single-in-flight rule by sharing the pending table with a request
kind, and move the shared JSON/lock/encoding helpers into McpInternal so
both tool families use one implementation. Settings dialog, design docs
and en_US/zh_TW/de_DE translations are updated accordingly.
Co-Authored-By: deepseek-flash
Add a "TLS证书" item to the Extensions menu below "MCP设置" that opens a
runtime-built dialog to enable one-way TLS and set the certificate and
private-key paths. On OK it writes the [tls] Enabled/CertPath/KeyPath keys
and calls ServerTlsIdentity::Load() so the change takes effect for new
connections immediately (design doc §7.1), mirroring the existing
CMcpSettingsDlg runtime-template pattern. All new strings are wired into
the en_US / zh_TW / de_DE language files, and the menu item is gated by
HIDE_MENU_TLS_CERTIFICATE / MF_TLS_CERTIFICATE like MCP settings.
Co-Authored-By: deepseek-v4-pro
Add optional one-way TLS to the MFC server (server/2015Remote) so the device
port can serve both TLS clients and legacy plaintext clients on the same port,
mirroring the Go server.
Server: on a connection's first bytes, sniff for a TLS ClientHello (0x16 0x03
+ handshake type 0x01). When [tls] Enabled=1 and the identity loads, hand the
socket to a short-lived blocking handshake thread (Option A) running Schannel
AcceptSecurityContext, then decrypt on recv and encrypt on send; plaintext
connections replay the sniffed bytes straight into the existing parse path, so
the plaintext code path is otherwise unchanged. The identity is loaded once
from [tls] CertPath/KeyPath as PEM + CNG (PKCS#8) — the same key pair the Go
server uses — and a missing [tls] section, an empty value, or a load failure
leaves plaintext serving intact and fail-closes any TLS ClientHello.
Also fix two transport-reliability bugs that surfaced end-to-end:
- send path: encrypt only the freshly appended plaintext tail and post a
single IOWrite wake-up guarded by a bSendPending flag, so back-to-back small
sends (terminal resize -> COMMAND_NEXT -> resize) no longer run concurrent
WSASends over the same mutable buffer (client saw DecryptMessage failures,
with WSAGetLastError() = 6001 / ERROR_DECRYPTION_FAILED);
- client Recv: keep the handshake's unconsumed tail bytes in m_raw and drain
them before the next recv, and log the real SECURITY_STATUS on
DecryptMessage failure instead of the stale Winsock error.
Co-Authored-By: deepseek-v4-pro
Add a connection-management feature to YAMA: a toolbar button (after MCP)
opens a dialog listing the managed host's TCP/UDP connections, with
right-click force-disconnect for IPv4 TCP rows.
Client: a new CConnectionsManager enumerates connections via iphlpapi
(GetExtendedTcpTable/GetExtendedUdpTable, IPv4+IPv6) and answers the
refresh and kill commands over a sub-connection.
Server: a new CConnectionsDlg (DialogBase) shows the list with sortable
columns and a right-click menu; the title-bar icon reuses the toolbar's
connection icon (res/connections.ico).
Fix byte order found during review: iphlpapi returns an IPv4 address as a
network-order DWORD and the port's low 16 bits in network order, so
storing them raw made the dialog show reversed IPv4 addresses and ports.
The client now stores addresses as network-order bytes and ports as host
order (ntohs), and reverses the conversion on disconnect.
Co-Authored-By: deepseek-v4-pro
iOS WebKit lacks Media Source Extensions with WebM/Opus, so remote audio
was silent on iPhone Safari/Chrome even though audio frames kept flowing.
Add a Web Audio API fallback path that decodes Opus packets with the
`opus-decoder` WASM library and schedules them onto an AudioContext.
The decoder bundle is now self-hosted — served at /static/opus-decoder.min.js
by both the Go and C++ servers — instead of pulled from a CDN, which was
unreachable from some networks.
Gotcha fixed during bring-up: the unscoped `opus-decoder` build's
`OpusDecoder.decodeFrame` is synchronous and returns {channelData,
samplesDecoded, sampleRate, errors} directly, not a Promise, so it must be
called in try/catch rather than via .then().
Also remove the on-screen diagnostic overlay (audio toast + frame counter)
used while debugging the phone without a console; diagnostics now go to
console.* only.
Co-Authored-By: deepseek-v4-pro
Add a dedicated ShareHostDlg with a "Use Shine protocol" checkbox (default
checked) so the operator can choose Shine (0) or HELL (1) when sharing or
transferring a host. The chosen protocol is appended to the wire payload as a
trailing colon field: "IP:PORT:0/1" for share and "IP:PORT:days:0/1" for
transfer.
The client parses the trailing field from COMMAND_SHARE and
COMMAND_ASSIGN_MASTER, applies it to new connections, and persists it so
auto-share/auto-transfer on restart keeps the same protocol. Old clients
ignore the extra field, and old/missing payloads fall back to -1 (baked-in
HELL), preserving compatibility with existing servers and share_list entries.
Co-Authored-By: deepseek-v4-pro
Add an optional MCP server (JSON-RPC 2.0 over Streamable HTTP) exposing
an online-host listing tool, protected by a Bearer token. Disabled by
default; configured via a new "Extensions > MCP Settings" dialog.
- McpServer: httplib + JSON-RPC 2.0 dispatch (initialize/ping/tools/list/tools/call)
- McpSettingsDlg: runtime-created dialog for enable/port/bind/token
- HostJson: extract single-host JSON serialization shared with WebService
- FRP: expose MCP port (union with listening/Web ports) when bound to 0.0.0.0
- i18n: en_US / zh_TW translations
Co-Authored-By: deepseek-v4-pro
Record the client's active-window history (start time, window title, and
dwell duration), newest first, skipping dwellings under 5 seconds and
breaking the timing on idle, capped at 500 entries. Add an "Activity
History" item inside the host's Client Management submenu that requests
the snapshot over the main connection and shows it in a new dialog. The
dialog rebuilds its edit control as a Unicode window so UTF-8 titles
render correctly instead of degrading to "?" through the MBCS ANSI
boundary. The menu item and dialog title go through _TR and are
localized in en_US and zh_TW.
Co-Authored-By: deepseek-v4-pro
Server sends COMMAND_SCREEN_PREVIEW_REQ when user double-clicks an
active (non-Locked/Inactive) host that advertises CLIENT_CAP_SCREEN_PREVIEW.
Client BitBlts primary screen, encodes to JPEG via GDI+ and replies. The
existing STATIC tooltip is replaced with a self-drawn CPreviewTipWnd
showing the thumbnail above the host info text, with wide-character
rendering so the popup also works on non-Chinese servers.
- Quality tiers reuse QualityProfile pattern: PreviewProfile + 6 levels
driven by GetTargetQualityLevel (FRP-aware), with 4K/ultrawide auto
upscale on Ultra/High tiers up to min(screenWidth/4, 1280).
- Client limits to 1 in-flight capture via atomic counter to defend
against flood/DoS; Send2Server is already mutex-serialized.
- Server validates responses by reqId only (single in-flight tip);
4s arrival timeout marks "preview unavailable" without blocking the
text fallback path.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>