The Linux client now answers COMMAND_SCREEN_PREVIEW_REQ, so a host with
an X11 desktop gets a thumbnail when it is double-clicked in the online
list, a frame in the list's Preview column, and an image from the MCP
get_screenshot tool. Previously only Windows clients advertised the
capability and Linux hosts showed "预览不可用" after a four second wait.
The client does not encode JPEG. Stock desktops ship libjpeg.so.8 whose
struct layout is the distribution's ABI (JPEG_LIB_VERSION 80), while the
in-tree jpeglib.h is libjpeg-turbo 3.1.1 (62), and libturbojpeg is not
installed by default; dlopening the system library against that header
fails with "Wrong JPEG library version: library is 80, caller expects
62". Instead the client sends raw pixels in a new screen preview format,
SCREEN_PREVIEW_FMT_BGRX: top-down rows of B,G,R,X with no row padding,
already scaled to the requested width. The server re-encodes to JPEG at
the single ingress point, so the preview popup, the list thumbnail cache
and the MCP tool keep consuming JPEG only.
Capture follows the path ScreenHandler already uses: root window copied
into an offscreen pixmap with an IncludeInferiors GC, then XGetImage,
which avoids BadMatch under compositing window managers. The X11 type
declarations and the dlopen loader moved out of ScreenHandler.h into
linux/X11Loader.h so both users share one dlsym table. The full-size
image is never materialized: a box filter reads straight from the
XImage rows (honouring bytes_per_line) into the output buffer, scales to
maxWidth without upscaling, and clamps the height to 1080 so a portrait
4K desktop cannot produce a 26 MB packet. Rows and columns come out
even, which they are for JPEG anyway.
The capability bit is now honest about the runtime. LOGIN_INFOR grows
DefaultCaps()/SetCaps(), and the client recomputes the bits before every
login and re-login: CLIENT_CAP_SCREEN_PREVIEW is set only when DISPLAY is
present and the X server actually opens. A headless host therefore gets
-32005 "Host does not support screen preview" from MCP instead of a
timeout, and a host whose session appears after boot picks it up on the
next reconnect. Requests are handled on a detached worker thread behind
a single-flight guard (matching the Windows client), so a slow XGetImage
never stalls the receive thread and a burst of requests degrades to "no
preview" rather than queueing. If the worker thread cannot be created,
the guard is released again, so one failure cannot leave every later
request rejected as busy until the client restarts.
The MCP design note claimed the capability was declared by Windows only,
and the get_screenshot tool description said the same; both now say what
the code does (Windows always, Linux when a display is reachable).
Server side, NormalizeScreenPreviewPacket runs in MessageHandle before
the MCP handoff and the PostMessage to the UI thread. It validates that
width/height are within the values the server itself can ask for and
that bytes equals width*height*4, converts with a stack Gdiplus::Bitmap
over the packet's own pixels (no copy, and no DEBUG_NEW trouble), and
rewrites the header to JPEG. The encoder output is read back by seeking
the stream rather than GlobalSize, so the packet carries no heap-block
padding after the EOI marker. Malformed packets are dropped; failure
statuses pass through untouched so the existing code can report them.
Tested against a Debug server with the WSL Ubuntu 24.04 build as the
client. get_screenshot returned valid JPEGs at max_width 480 (480x142,
1.7 KB) and 1920 (1920x570, 17.9 KB), repeatably; the list showed a
thumbnail for the GUI client and N/A for a second copy started without
DISPLAY, which also answered -32005. The box filter and the BGRX to JPEG
conversion were checked separately with quadrant fixtures: the browser
over the synthetic B,G,R,X buffer recovers red/green/blue/white in the
right channels and the downscale averages, handles non-integer ratios
and row padding, and rejects 24bpp and upscaling. The captured frames
come out black under WSLg because Xwayland keeps no root pixmap there;
that is the compositor, not this code, and Xorg sessions capture
normally.
Co-Authored-By: deepseek-flash
The C2C file transfer tool required both ends to be Windows clients. A Linux
client can already land the files: the Windows source worker builds every
entry name by plain string concatenation of dst_dir and the relative path, so
a POSIX dst_dir such as /tmp/recv arrives as "/tmp/recv\sub\file", which the
POSIX receiver normalizes to "/" and writes below an absolute path. What was
missing was the server gate and any way to tell whether the writes succeeded.
The server now accepts LNX/MAC destinations instead of rejecting them, and
validates dst_dir by destination type: an absolute Windows path for Windows
targets, an absolute POSIX path without backslashes for POSIX targets. The
paths and dst_dir arguments also reject embedded NULs, and a POSIX dst_dir is
converted to CP936 exactly so unencodable characters fail loudly instead of
silently becoming '?'.
To make receiver_ack meaningful, a Linux client that receives a C2C transfer
now reports what it wrote. It tracks the outcome per transferID, counting a
directory entry, the last chunk of a file and the completion packet of an
empty file as the three ways an item is settled, with done sets so that
source retries and the trailing completion packet never double count. When
every item is settled it sends one C2CSendResultPacket back on its main
connection under the new TOKEN_C2C_RECV_RESULT (176), with the first errno in
the win32err field and the mapped FEV2_* status. A dedicated token is used
instead of reusing 175 because a host can be the destination of one transfer
while being the source of another, and a destination result must never latch
the source side's done flag.
The server waits up to five seconds for that acknowledgement after the source
reports success, and only for destinations advertising the new
CLIENT_CAP_C2C_RECV_ACK capability bit (Linux only, macOS reports nothing).
A failed acknowledgement becomes -32011 with the status, errno and received
file count; a missing acknowledgement stays an error only for transfers that
actually moved bytes, since a transfer of empty files alone gives the
receiver nothing to learn totalFiles from. Windows destinations are unchanged
and skip the wait entirely.
Verified on the debug instance: Windows to Linux (WSL Ubuntu 24.04) with
subdirectories, an empty directory, a Chinese file name and a 3 MB binary
lands with matching SHA-256 and receiver_ack true; a Windows-style dst_dir
returns -32602; an unwritable POSIX destination returns -32011; the existing
Windows to Windows cases still pass with receiver_ack false and the same
latency.
Co-Authored-By: deepseek-flash
The Linux client is a standalone ELF with no in-memory loader and no
COMMAND_UPDATE handler, so the server's upgrade menu silently did nothing
for an LNX host. It can now push a new binary and have the client replace
and restart itself.
The server grows an LNX branch next to EXE/DLL/SC. It takes the ELF from an
explicit settings.ini LinuxClientPath, then ghost_linux_amd64 in the
program directory, then res\ghost_linux, then IDR_LINUX_GHOST, the copy
the server has always embedded for the client-build dialog, so a server
with nothing on disk can still upgrade; a configured path that cannot be
read is an error rather than a silent fallback. Only x86_64 ELF64 is
accepted. The payload adds a 32-byte MD5 trailer to the existing
[cmd][size:8][payload] layout, which the Windows branches keep unchanged.
linux/ghost in the tree is still the build from before this change and is
not updated here. It has to be refreshed before release: the embedded
default is copied from it at build time, and a stale copy would install a
client with no COMMAND_UPDATE handler, which can never be upgraded
remotely again.
The client verifies the declared size, elf magic, e_machine against its own
ELF header and the MD5 before touching anything, so a miscopied or corrupted
file never lands on disk. It then writes a same-directory temp file with
fsync and 0755 (a running executable cannot be truncated in place), renames
it over its own path atomically, keeps the replaced inode as .old, removes
the PID file, forks a detached child that waits for the old process to exit
and execs the new binary with the original argv, and finally exits with
S_CLIENT_UPDATE. Doing the rename and the exec in that order avoids ETXTBSY,
double connections under one client id, and a new instance that
isAlreadyRunning() would refuse to start.
Any failure (unwritable install directory, bad payload, fork) leaves the
client running on the old version; the reason goes to the client log and to
the server's message log through TOKEN_CLIENT_MSG, which required moving
that struct out of the Windows-only block in common/commands.h.
The shared client source had also stopped compiling off Windows: the
unknown-header diagnostic in IOCPClient::OnServerReceiving printed
TlsEnabled() and m_tls.IsReady() unconditionally, but TlsChannel and m_tls
only exist on Windows. That diagnostic now keeps the TLS details where the
channel exists and prints just the buffer dump everywhere else.
Verified end to end in WSL against the Debug server, foreground and -d
daemon: the PID changes, the installed file matches the pushed MD5, the host
reconnects, and ghost.old holds the previous binary. A read-only install
directory reports "cannot create ...: Permission denied" in the server log
with the client still online. With an invalid file at ghost_linux_amd64 the
server refuses it and names that path, which shows the disk source wins;
with nothing on disk the update goes through from the embedded ELF.
Co-Authored-By: deepseek-flash
Adds the 54th MCP tool, copy_files_c2c, which asks the source client to
push a set of files straight to another online client. Previously the only
way to move files between two clients was to download them to the server
machine and upload them again, so the data crossed the wire twice and
needed free disk on the server. With C2C the server only relays packets
and never parses or stores the payload.
Protocol. Two new ids in common/commands.h: COMMAND_C2C_SEND_FILES (174),
carrying the destination directory followed by a NUL-separated path list,
and TOKEN_C2C_SEND_RESULT (175), a fixed 45-byte result packet sent back
over the same sub-connection the transfer used. Clients advertise support
with the LOGIN_INFOR capability bit CLIENT_CAP_C2C_PATHS (0x0008), exposed
server side as Context::SupportsC2CPaths(). File transfer V2 already knew
how to push to dstClientID, so the destination side needed no change at
all; existing V2 receive paths keep working, and older clients simply do
not advertise the bit and are rejected with a clear error instead of
hanging.
Client. OnC2CSendFiles expands environment variables, collects directories
recursively, opens its own sub-connection (with sub-connection auth), and
runs FileBatchTransferWorkerV2 in a detached thread, then reports the
result on that same connection. Every early exit now reports a structured
failure rather than staying silent. The worker needs the process-level
InitFileUpload call that the receive path performs lazily, and a source
client may never have opened a file manager or received an upload, so the
initialization is factored into EnsureV2TransferInited() and called from
both paths.
Server. copy_files_c2c mirrors the existing upload tool: gates, id parsing,
capability checks, path validation, then a session keyed on the source host
that WaitC2CDone polls until the result packet arrives. The C2C relay
branch used to attach a CDlgFileSend progress dialog to the source's
sub-connection; NotifyProc then routed every later packet on that
connection to the dialog, which parsed the result packet as a V1 file
chunk and dropped it, so the tool always timed out even though the files
had arrived. IsC2CTransferPending() now suppresses dialog creation for
MCP-driven transfers only, leaving manual Ctrl+V transfers untouched.
Errors map to -32001 for a source-side transfer failure, -32010 for access
denied, -32009 for a missing path and -32002 for an offline destination.
Both hosts must be Windows: the destination is restricted too, because the
source embeds dst_dir in each V2 chunk name as an absolute Windows path and
only the Windows receiver applies it literally. A Linux or macOS receiver
never gets a target directory here (the clipboard flow sets one with
COMMAND_C2C_PREPARE, which this path does not send), so it would strip the
drive letter and write under / instead. Supporting that needs a prepare
packet carrying an explicit path plus an upgrade of those clients, so for
now the tool rejects them with -32005 rather than writing somewhere wrong.
Verified end to end on the Debug build: three files including a non-ASCII
name, an empty directory and a 3 MB binary arrived with matching SHA-256
in 3.2 s, a non-existent destination directory was created, and the
negative cases returned the documented codes. mcp_smoke.ps1 passes 41/41
with two new assertions and 27/27 in -SkipHost mode. Design notes, error
table and limitations are in docs/Mcp_FileTransfer_Design.md section 14
and docs/Mcp_Design.md section 15.
Co-Authored-By: deepseek-flash
Four new client-to-server tokens carry a win32/LSTATUS code when a
command fails instead of returning empty data: TOKEN_SERVICE_ERROR
(170), TOKEN_FILE_LIST_ERROR (171), TOKEN_REG_ERROR (172) and
TOKEN_DOWNLOAD_ERROR (173). They sit on byte values that were unused,
so existing numbering is untouched.
The three data paths that used to collapse "failed" and "empty" into
the same packet now distinguish them: OpenSCManager failures, directory
enumeration failures and RegOpenKeyEx failures all report the code that
was actually returned, and UploadToRemoteV2 reports why it found no
file to transfer before the transfer sub-connection is ever created.
Every failure branch still sends the packet the old server expects
(TOKEN_FILE_LIST, the empty TOKEN_REG_PATH/KEY pair, the ClientMsg
popup), so a new client talking to an old server degrades to exactly
today's behaviour instead of timing out. Success paths are byte-for-
byte unchanged.
Co-Authored-By: deepseek-flash
Add a third view to the web UI, the screen wall, which shows several
devices at once in one tab with 1x1 / 2x2 / 3x3 / 4x4 / 5x5 layouts and a
device sidebar on the left. Tiles are monitoring-only; clicking one
enlarges that device into the existing single-screen page for control, and
Back returns to the wall. The same device can be added several times: all
tiles of one device share a single decoder and a single stream.
The wall decodes at most 9 streams on desktop and 4 on touch devices.
Tiles beyond the budget keep receiving frames but have their decoder
closed and show the last frame plus a Paused badge; they are promoted
automatically when a live tile goes away. Subscriptions are reference
counted on the client (streams map with owner sets), so a stream is only
connected on the 0 -> 1 transition and disconnected on 1 -> 0, and the
wall and the single-screen page can share one device without tearing the
stream down.
Server side, WebClient now holds a set of watched devices instead of a
single id. A new multiWatch command flag selects set semantics, while
clients without it keep the old replace-all behaviour, so an old frontend
against the new server is unchanged. connect and disconnect responses echo
id and req so the frontend can route them, input commands carry an id and
are resolved against the watch set (dropped when the set has several
devices and no id), and the per-client watch set is capped at 32.
For fast recovery after a pause or when joining late, the server caches
each device's raw IDR payload and replays it on connect and on a new
keyframe command, then asks the client to force a new IDR. The client gets
COMMAND_SCREEN_KEYFRAME_REQ = 169 and an atomic request flag that is only
cleared after an IDR actually came out of the encoder, so a failed capture
or EAGAIN does not lose the request. The frontend retries the keyframe
request up to three times; an old client that ignores the command simply
recovers on the next natural GOP.
Also fix the keyframe cache double wrapping: BroadcastH264Frame used to
cache the full packet header and HandleConnect wrapped it again. The cache
now stores data + 9, len - 9 and every sender wraps it through
BuildFramePacket, and the cache is cleared on cold start and on resolution
change. StopRemoteDesktop is always called outside m_ClientsMutex, with
the ids collected under the lock first.
Co-Authored-By: deepseek-flash
Add a per-client TLS transport toggle controlled from the server, using the
presence of the client's trust-anchor certificate in the registry as the
single source of truth (no separate tls_enable flag).
- Client reports its TLS status via a new RES_TLS token (cert present -> 1)
appended to LOGIN_INFOR's reserved field.
- Server online list gains a "TLS" column after the permission column.
- The "experimental features" right-click menu gains "TLS传输" / "取消TLS"
with confirmation and a guard that prompts (instead of sending) when the
server has no TLS certificate ready.
- New COMMAND_TLS_ENABLE / COMMAND_TLS_DISABLE (166/167): the server pushes
its cert PEM into the client registry settings\tls_cert (enable) or deletes
it (disable). The client picks this up on next startup via the existing
ReadTrustAnchor logic, so the switch is non-live by design.
- Icons and en_US/zh_TW/de_DE translations for the new menu items.
Co-Authored-By: deepseek-v4-pro
The file-transfer speed dialog previously sent a separate CMD_FILE_SPEED
(5 bytes) back-to-back before COMMAND_SCREEN_SPY / COMMAND_LIST_DRIVE when
opening remote desktop or file manager. The IOCP send path batches two
consecutive Send2Client calls into one WSASend of the accumulated
OutCompressedBuffer, so the client received the [FILE_SPEED][SCREEN_SPY]
command stream twice - the root cause of two remote-desktop dialogs popping
up on a single click (introduced in commit 76decec).
Fold the two values into MasterSettings (TransferChunkKb / TransferDurationMs,
uint16 each, before Reserved, sizeof unchanged at 1000) so they reach every
client on login and are broadcast to online clients when the dialog saves.
The client persists them into [transfer] on CMD_MASTERSETTING, guarded by
TransferChunkKb != 0 so older masters keep local defaults. CMD_FILE_SPEED(252)
and its client handler remain for backward compatibility, but the master no
longer sends it.
Update the design doc, the three GBK lang files' prompt entry, and the READMEs.
Co-Authored-By: deepseek-v4-pro
Migrate the SimplePlugins remote drawing-board overlay into the YAMA client
as an "实验功能" right-click submenu entry. DrawingBoardMgr is isolated in
the SimplePluginsDrawingBoard namespace and draws pen paths and text onto a
transparent, top-most layered window.
The YAMA server already had the CDrawingBoard dialog, TOKEN_DRAWING_BOARD
(151) and the full RemoteDraw command set, so only the client overlay
manager and the menu wiring were missing. Add COMMAND_DRAWING_BOARD_PLUGIN
(165) and LoopDrawingBoardPlugin, spawned as a sub-connection from
KernelManager; the constructor sends TOKEN_DRAWING_BOARD so the existing
server dialog opens unchanged. Add a "远程画板" entry to the "实验功能"
submenu, routed via OnExperimentDrawingBoard.
Co-Authored-By: deepseek-v4-pro
Migrate the SimplePlugins privacy-screen (virtual desktop) feature into the
YAMA client as an "实验功能" right-click submenu entry. The capture layer is
rewritten rather than copied: CScreenHideSpy now subclasses YAMA's ::CScreenSpy
(vDesk=TRUE) so capture and encoding reuse YAMA's encoder pipeline instead of
SimplePlugins' diverged jpeg capture chain; CScreenManagerBase and
CScreenHideManager are migrated under the SimplePluginsScreenHide namespace,
and SimplePlugins-only ALGORITHM_DEFAULT is mapped to ALGORITHM_DIFF.
Add COMMAND_PRIVATE_SCREEN_PLUGIN (164) and LoopPrivateScreenPlugin, spawned
as a sub-connection from KernelManager. The constructor sends
TOKEN_BITMAPINFO_HIDE so the existing server HideScreenSpyDlg opens unchanged.
Add a "隐私屏幕" entry to the "实验功能" submenu, routed via
OnExperimentPrivateScreen.
Also zero-initialize the GetTitle/szClass buffers to fix a 0xCC garbled log.
Co-Authored-By: deepseek-v4-pro
Migrate the SimplePlugins file-management feature into the YAMA client as an
experimental feature. The migrated CFileManager, MasterEncoder and Info-Zip
sources live under client/file/ and are isolated in the SimplePluginsFile
namespace to avoid clashing with the native FileManager class.
Add COMMAND_FILE_MANAGER_PLUGIN (163) and LoopFileManagerPlugin, spawned as
a sub-connection from KernelManager. Add an "实验功能" submenu with a
"文件管理" entry above "客户管理" in the online-hosts right-click menu,
routed via OnExperimentFileManager to the existing TOKEN_DRIVE_LIST_PLUGIN
dialog path.
Co-Authored-By: deepseek-v4-pro
Migrate the MachineManager client from SimplePlugins and wire the server toolbar.
Client:
- Add CMachineManager (process/window/net/software/IE history/favorites/service/task/hosts
enumeration plus process injection via yapi.hpp).
- Add COMMAND_MACHINE_MANAGE (162) and spawn the manager on an authenticated
sub-connection in KernelManager.
- Register MachineManager.cpp/.h and yapi.hpp in both client projects.
Server:
- Add the 主机管理 toolbar button (index 18, after 远程交谈) reusing the IDI_MACHINE icon,
plus en/zh_TW/de translations.
Fix:
- Free the IEnumSTATURL strings (su.pwcsUrl/su.pwcsTitle) with CoTaskMemFree, release the
enumerator, and set STATURL.cbSize to stop the IE-history leak reported by VLD.
Co-Authored-By: deepseek-v4-pro
Add a "远程交谈" toolbar button (placed after 连接管理) that sends COMMAND_CHAT(161) to the selected host. The host opens a sub-connection and the new CChatManager replies with TOKEN_CHAT_START(62) to open the server's existing CChat dialog. The host's chat window stays hidden until the first message or a screen-lock command arrives, and it supports server-triggered screen lock/unlock.
Co-Authored-By: deepseek-v4-pro
Add a connection-management feature to YAMA: a toolbar button (after MCP)
opens a dialog listing the managed host's TCP/UDP connections, with
right-click force-disconnect for IPv4 TCP rows.
Client: a new CConnectionsManager enumerates connections via iphlpapi
(GetExtendedTcpTable/GetExtendedUdpTable, IPv4+IPv6) and answers the
refresh and kill commands over a sub-connection.
Server: a new CConnectionsDlg (DialogBase) shows the list with sortable
columns and a right-click menu; the title-bar icon reuses the toolbar's
connection icon (res/connections.ico).
Fix byte order found during review: iphlpapi returns an IPv4 address as a
network-order DWORD and the port's low 16 bits in network order, so
storing them raw made the dialog show reversed IPv4 addresses and ports.
The client now stores addresses as network-order bytes and ports as host
order (ntohs), and reverses the conversion on disconnect.
Co-Authored-By: deepseek-v4-pro
Add a novice-friendly "File Transfer Speed" dialog under the Advanced menu
that controls file-transfer speed in both directions without touching
SimplePlugins. Speed is passed through InitFileUpload's existing
chunkSizeKb/sendDurationMs arguments, so the precompiled library stays
untouched. Seven presets run from ~0.3 MB/s up to a new 10 MB/s tier plus an
unlimited tier; the chosen value is stored in [transfer] ChunkKb/DurationMs.
Upload reads THIS_CFG at the master's InitFileUpload (2015RemoteDlg.cpp:2225)
and takes effect on restart. Download is pushed to the client over a new
CMD_FILE_SPEED (252) command, sent from OnOnlineFileManager and
OnOnlineDesktopManager before each session opens, and read by all four client
InitFileUpload call sites via GetTransferSpeed so the process-global refcount
cannot latch a stale speed. All Chinese strings go through LangManager, with
en_US/zh_TW/de_DE entries added for the tier names, format strings and hint
text.
Co-Authored-By: deepseek-v4-pro
Record the client's active-window history (start time, window title, and
dwell duration), newest first, skipping dwellings under 5 seconds and
breaking the timing on idle, capped at 500 entries. Add an "Activity
History" item inside the host's Client Management submenu that requests
the snapshot over the main connection and shows it in a new dialog. The
dialog rebuilds its edit control as a Unicode window so UTF-8 titles
render correctly instead of degrading to "?" through the MBCS ANSI
boundary. The menu item and dialog title go through _TR and are
localized in en_US and zh_TW.
Co-Authored-By: deepseek-v4-pro
TOKEN_AUTH: when the server has a V2 private key, signs "SN|valid(0/1)"
with ECDSA P-256 and places "sig:<base64>" in the response reserved field.
Clients can verify server identity without changing the request format.
TOKEN_SERVER_VERIFY (251): added constant to commands.h; handler already
present in 2015RemoteDlg.cpp for the challenge-response server identity check.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Server sends COMMAND_SCREEN_PREVIEW_REQ when user double-clicks an
active (non-Locked/Inactive) host that advertises CLIENT_CAP_SCREEN_PREVIEW.
Client BitBlts primary screen, encodes to JPEG via GDI+ and replies. The
existing STATIC tooltip is replaced with a self-drawn CPreviewTipWnd
showing the thumbnail above the host info text, with wide-character
rendering so the popup also works on non-Chinese servers.
- Quality tiers reuse QualityProfile pattern: PreviewProfile + 6 levels
driven by GetTargetQualityLevel (FRP-aware), with 4K/ultrawide auto
upscale on Ultra/High tiers up to min(screenWidth/4, 1280).
- Client limits to 1 in-flight capture via atomic counter to defend
against flood/DoS; Send2Server is already mutex-serialized.
- Server validates responses by reqId only (single in-flight tip);
4s arrival timeout marks "preview unavailable" without blocking the
text fallback path.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Client first packet on every sub-connection signs (clientID || timestamp ||
nonce) and waits for server ack. Server verifies signature and pins clientID
on the sub-connection ctx, eliminating IP-reverse-lookup unreliability for
NAT/localhost scenarios. Sub-conn coverage: Win 12 sites, Linux/macOS 3-4
each. Main connection keeps existing TOKEN_LOGIN flow unchanged.
Includes:
- Protocol structs sized to 512/256 bytes with reserved space for future
extensions (locale, OS info, session token, etc.)
- 5-min timestamp tolerance (Kerberos-grade replay window)
- 10-sec client wait for cross-pacific / weak-network tolerance
- Fix RemoveFromHostList side-effect ordering: MarkDeviceOffline and
m_ActiveWndW.erase now only fire when ctx is actually removed from
m_HostList, preventing sub-conn disconnects from misreporting main as
offline (regression introduced by auth-set clientID on sub ctx)
- Fix latent bug: IOCPClient::m_conn was never assigned in ctor, leaving
GetConnectionAddress() always NULL and FileManager V2 transfer's
srcClientID always 0
Breaking change: new client cannot use sub-features against old server.
New server tolerates legacy clients (no auth). Future tightening can reject
unauthenticated sub-connections via IsAuthenticated() flag.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>