The Advanced menu now ends with Run Test Program. It copies the kernel
payload that was already read into memory, points its CONNECT_ADDRESS at
127.0.0.1:<listen port>, and loads it with MemoryLoadLibrary inside the
master process, so this machine comes online as a controlled host -- no
second machine is needed to try remote desktop or file transfer. A
worker thread waits for the client to exit, then frees the module and
re-enables the item. Only one instance runs at a time: the item is
grayed while it does, and stopping it means uninstalling the test host
from the online list.
The loaded copy carries LOCAL_TEST_CLIENT_MAGIC in szFuture. The client
uses that mark to refuse the commands that would otherwise hit the host
process or the whole machine: uninstall (no self_del), update, run as
admin, ban, share/assign, and shutdown/reboot/logoff. It also skips
auth-kernel detection, which GetModuleFileName(NULL) would misjudge
inside the master.
Renames szFututre to szFuture and documents that the first 16 bytes of
the reserved tail are now claimed, with a static_assert so it cannot
silently shrink below the magic.
Translations for en_US, zh_TW and de_DE, plus the HIDE_MENU_RUN_TEST
feature flag and its row in the limits dialog.
Verified on a Debug master: the item is last and has its icon, one click
brings the host online, a second click is refused, uninstall stops it in
about a second and the master survives, re-run works, and exiting the
master with a live test client takes 2.6s (3.0s baseline).
Co-Authored-By: deepseek-flash
Add a "高级 → DLL内嵌TLS证书" toggle (off by default, persisted as
[settings] EmbedTlsInDll). When it is on, ReadKernelDll patches the server's
current TLS anchor into the ServerDll and ShellCode payloads, so clients that
come online through the loaders start their own session over TLS without
waiting for an online push. The plaintext DLL loader in client/main.c is
untouched; only the DLL's fresh connection is protected. The write happens
after SetServer and before CalcMD5FromBytes, and the anchor records the host
part of the master address rather than "ip:port" because the client matches
the anchor against its configured address set. TinyRun has no anchor block and
keeps working as before.
Toggling the switch, and confirming the certificate dialog, rebuild the six
payloads in place, so no server restart is needed after a certificate change.
The payload pointers are replaced as a whole, and the network threads that read
them (SendServerDll and TOKEN_GETVERSION) now take a dedicated critical section
for the full duration of use.
COMMAND_UPDATE no longer clears the tls_disabled marker on the client. Now that
any delivered DLL may carry the anchor, "the payload has an anchor" no longer
means the operator opted this host into TLS, and clearing the marker would
silently flip a host that was explicitly set to plaintext onto TLS against a
plaintext path. Re-enabling TLS stays an explicit action through
COMMAND_TLS_ENABLE and COMMAND_SET_PROTO, which still clear the marker.
Menu and notice strings were added to en_US, zh_TW and de_DE, and the embedded
TLS design document records the new switch and the revised update semantics.
The new menu entry also takes a feature-limits slot so a subordinate master
can hide it like every other 高级 item (see 8807321):
HIDE_MENU_EMBED_TLS_ANCHOR in UIBranding.h, MF_EMBED_TLS_ANCHOR at bit 57
in FeatureFlags.h (the first free one after MF_FILE_SPEED), a row in the
主菜单 tab of CFeatureLimitsDlg, and the matching DeleteMenu on the 高级
menu. The entry still has no bitmap of its own, so it renders without an
icon next to its three siblings.
Co-Authored-By: deepseek-flash
The share payload was host:port:shine and carried no transport at all, so a
shared client fell back to its baked-in protoType. Share instances also skip
ApplyProtoSwitch (ClientDll.cpp:810), so a client upgraded to WSS was shared
to a TLS front end as raw TCP and looped on HTTP/1.1 400.
Extend both payloads with an optional trailing transport field:
share : host:port:shine[:transport]
assign : host:port:days:shine[:transport]
The field is omitted when the source protocol is not TCP/WS/WSS, so HTTP/UDP/
KCP hosts keep their previous behaviour instead of being silently downgraded
to plain TCP.
- server: add SelectedShareTransport(), share it between OnOnlineShare and
OnOnlineAssignTo, and accept a tcp:// ws:// wss:// prefix in the address.
- client: parse the field on both paths and persist the assigned value to
settings/master_transport, clearing it when the field is absent.
- share_list: dedup on host:port instead of the whole record, so re-sharing
a host with a different transport replaces the stale entry.
- assign: guard bToken[_MAX_PATH] against the longer payload.
- lang: translate the reworded prompt and the three new messages in en_US,
zh_TW and de_DE.
Transport is pinned at share time and does not follow a later protocol switch
on the master link; the m_bShared gate stays as-is on purpose.
When the server has TLS enabled, the builder can now bake its certificate into
the client it produces, so a distributed client speaks TLS on its very first
connection instead of waiting for the anchor to be pushed after a plaintext
login. The dialog gets a checkbox (IDC_CHECK_TLS_ANCHOR) that is only enabled
for payloads and protocols where an embedded anchor makes sense; the choice is
remembered even when the control flips to disabled and back, so switching
protocols cannot silently undo a deliberate opt-out. Every label variant stays
short enough to fit the 196 DLU field, including the German ones. A template
that predates the anchor block no longer aborts generation: it warns, clears
the checkbox and produces a plain client, so a master upgraded without
rebuilding the ghost/ServerDll resources does not block every build.
The certificate lands in a fixed 4 KiB block (magic, version, length, FNV-1a
hash, master address, PEM) carved out of the payload at build time. The client
reads its trust anchor from four sources in order: the tls_disabled marker,
the certificate the server pushed into the registry, a PEM file next to the
executable, and finally the embedded block.
The embedded block only applies to a connection whose target matches the
master recorded at generation time, compared as an address set: an exact
string match when only one address is configured, or an intersection of
resolved IPv4 addresses otherwise. A transferred, shared or parallel instance
falls back to the old plaintext first-connect path instead of pinning itself
to a certificate it can never verify. That decision is made per connection,
not per process: shared and parallel instances are threads inside a single
client process, so a process-wide flag let whichever instance connected first
decide for all of them, and the first load of the TLS state cached that answer
for good. The TLS layer now keeps two cached states (embedded anchor allowed,
and not allowed), picks one per handshake, and reports the anchor source of
that handshake for the login capability bit. Matching by resolved address also
keeps parallel mode working, where the connection goes to the single IP the
domain pool selected while the configured master is a domain or a list.
Server side, generated and updated payloads get the block written in place;
the client reports the capability bit on login so the console can tell which
hosts are already TLS-only on first connect. Loading the anchor decodes every
PEM block in the chain rather than just the leaf, and an anchor that exists
but fails to load keeps the old fail-closed behaviour. A pushed anchor only
reconnects when the transport of the live connection actually changes, judged
against that connection's own target rather than the process-wide switch.
This was verified end to end against a freshly generated client with an empty
registry: the first connection was a TLS 1.2 ClientHello 0.2 s after start,
and a four-certificate fullchain loaded all four blocks. Re-verified after the
per-connection rework with the anchor block patched into a debug client: with
a matching master the first bytes are a ClientHello, with a foreign master the
client logs the skip and sends plaintext, and a domain master resolves to the
IP it connects to and still matches. A master domain that no longer resolves
falls back to plaintext within a second and is not looked up again for a
minute, instead of stalling every reconnect on a DNS timeout while holding the
lock the certificate verification needs.
Co-Authored-By: deepseek-flash
Three of the findings only bite in deployment. First, the client's TLS and
WebSocket handshakes run synchronously on the reconnect thread with no socket
timeout, so a peer that accepts TCP and then goes quiet (black-holed proxy
upstream, middlebox that only receives) blocks recv() forever and stalls the
reconnect loop until the process is restarted. Set a 15 s SO_RCVTIMEO and
SO_SNDTIMEO for the handshake window - the same value both server handshake
threads use - and clear them once the connection is up so the worker thread's
select plus blocking recv keeps working as before.
Second, per-IP rate limiting counted the getpeername address before the real
device was known. Behind a same-host reverse proxy that address is loopback,
which IPWhitelist always trusts, so WS traffic was neither counted nor banned;
behind a remote proxy every device shares one bucket, and tripping the
threshold disconnected all of them. Count and ban by the forwarded device IP
once the upgrade resolves it, mirroring the Go server's limitDirectPeer and
handleConnection split. Direct connections keep their accept-time count and
are not counted twice.
Third, the protocol switch disarmed its five-minute auto-revert as soon as the
new entry connected, which only proves TCP/TLS/WS handshaking finished. If
login is never accepted there (wrong backend, reverse proxy pointing at some
other WS service), the revert could never fire and the client would keep
retrying a dead entry. Disarm on the first CMD_MASTERSETTING instead, which
the server only sends after adding the host to its online list, and re-check
it on every heartbeat so a late one still counts.
The smaller items came along: free the handshake parameter when CreateThread
fails in both handshake starters, move the WS_Handshaking fail-closed guard
ahead of the TLS branch so it also covers WSS (where tlsState is already
TLS_Ready), generate the frame mask from a per-channel PRNG inside the send
lock instead of an unseeded global rand(), make the transport flags and the WS
session's ready flag atomic, drop rather than send unframed application bytes
when a WS session has closed, and abort a protocol switch whose PEM fails to
load instead of moving to an entry that cannot connect.
The Go server now bounds the upgrade sniff even when ReadTimeout is zero, and
the design doc records the two-stage limiter, the login-based disarm and the
review items that stay as known limits.
The protocol switch's input prompt is cut down to "reverse-proxy entry
(host:port)" - the label static is only 81 dialog units wide, and the old
sentence ran to roughly three times that.
The three language files follow: en_US and zh_TW gain the shortened prompt and drop
the long key it replaced, the German file gains the protocol-switch block it never
had, and its WebSocket tip key is corrected - it had picked up a Go-server clause
the source string never carried, so the tip was never translated at all.
Co-Authored-By: deepseek-flash
Adds the 54th MCP tool, copy_files_c2c, which asks the source client to
push a set of files straight to another online client. Previously the only
way to move files between two clients was to download them to the server
machine and upload them again, so the data crossed the wire twice and
needed free disk on the server. With C2C the server only relays packets
and never parses or stores the payload.
Protocol. Two new ids in common/commands.h: COMMAND_C2C_SEND_FILES (174),
carrying the destination directory followed by a NUL-separated path list,
and TOKEN_C2C_SEND_RESULT (175), a fixed 45-byte result packet sent back
over the same sub-connection the transfer used. Clients advertise support
with the LOGIN_INFOR capability bit CLIENT_CAP_C2C_PATHS (0x0008), exposed
server side as Context::SupportsC2CPaths(). File transfer V2 already knew
how to push to dstClientID, so the destination side needed no change at
all; existing V2 receive paths keep working, and older clients simply do
not advertise the bit and are rejected with a clear error instead of
hanging.
Client. OnC2CSendFiles expands environment variables, collects directories
recursively, opens its own sub-connection (with sub-connection auth), and
runs FileBatchTransferWorkerV2 in a detached thread, then reports the
result on that same connection. Every early exit now reports a structured
failure rather than staying silent. The worker needs the process-level
InitFileUpload call that the receive path performs lazily, and a source
client may never have opened a file manager or received an upload, so the
initialization is factored into EnsureV2TransferInited() and called from
both paths.
Server. copy_files_c2c mirrors the existing upload tool: gates, id parsing,
capability checks, path validation, then a session keyed on the source host
that WaitC2CDone polls until the result packet arrives. The C2C relay
branch used to attach a CDlgFileSend progress dialog to the source's
sub-connection; NotifyProc then routed every later packet on that
connection to the dialog, which parsed the result packet as a V1 file
chunk and dropped it, so the tool always timed out even though the files
had arrived. IsC2CTransferPending() now suppresses dialog creation for
MCP-driven transfers only, leaving manual Ctrl+V transfers untouched.
Errors map to -32001 for a source-side transfer failure, -32010 for access
denied, -32009 for a missing path and -32002 for an offline destination.
Both hosts must be Windows: the destination is restricted too, because the
source embeds dst_dir in each V2 chunk name as an absolute Windows path and
only the Windows receiver applies it literally. A Linux or macOS receiver
never gets a target directory here (the clipboard flow sets one with
COMMAND_C2C_PREPARE, which this path does not send), so it would strip the
drive letter and write under / instead. Supporting that needs a prepare
packet carrying an explicit path plus an upgrade of those clients, so for
now the tool rejects them with -32005 rather than writing somewhere wrong.
Verified end to end on the Debug build: three files including a non-ASCII
name, an empty directory and a 3 MB binary arrived with matching SHA-256
in 3.2 s, a non-existent destination directory was created, and the
negative cases returned the documented codes. mcp_smoke.ps1 passes 41/41
with two new assertions and 27/27 in -SkipHost mode. Design notes, error
table and limitations are in docs/Mcp_FileTransfer_Design.md section 14
and docs/Mcp_Design.md section 15.
Co-Authored-By: deepseek-flash
Add a per-client TLS transport toggle controlled from the server, using the
presence of the client's trust-anchor certificate in the registry as the
single source of truth (no separate tls_enable flag).
- Client reports its TLS status via a new RES_TLS token (cert present -> 1)
appended to LOGIN_INFOR's reserved field.
- Server online list gains a "TLS" column after the permission column.
- The "experimental features" right-click menu gains "TLS传输" / "取消TLS"
with confirmation and a guard that prompts (instead of sending) when the
server has no TLS certificate ready.
- New COMMAND_TLS_ENABLE / COMMAND_TLS_DISABLE (166/167): the server pushes
its cert PEM into the client registry settings\tls_cert (enable) or deletes
it (disable). The client picks this up on next startup via the existing
ReadTrustAnchor logic, so the switch is non-live by design.
- Icons and en_US/zh_TW/de_DE translations for the new menu items.
Co-Authored-By: deepseek-v4-pro
V2 upload to a remote directory picked via the quick-icon shortcuts
(Desktop / Downloads / Home) landed files in a literal "%USERPROFILE%"
folder instead of the real profile. The shortcuts set m_Remote_Path to an
unexpanded "%USERPROFILE%\..." template (FileManagerDlg.cpp
OnRemoteDesktop/Downloads/Home), and the V2 receive path handed that
filename straight to RecvFileChunkV2 (prebuilt FileUpload lib), which writes
it verbatim. V1 upload already expanded env vars in COMMAND_FILE_SIZE
(client/FileManager.cpp ExpandPath), so this is a V2-only regression.
Expand the filename's environment variables in CKernelManager::OnReceive's
COMMAND_SEND_FILE_V2 branch before RecvFileChunkV2, rebuilding the packet
only when the expanded length differs; other packet types pass through
unchanged.
Co-Authored-By: deepseek-v4-pro
The file-transfer speed dialog previously sent a separate CMD_FILE_SPEED
(5 bytes) back-to-back before COMMAND_SCREEN_SPY / COMMAND_LIST_DRIVE when
opening remote desktop or file manager. The IOCP send path batches two
consecutive Send2Client calls into one WSASend of the accumulated
OutCompressedBuffer, so the client received the [FILE_SPEED][SCREEN_SPY]
command stream twice - the root cause of two remote-desktop dialogs popping
up on a single click (introduced in commit 76decec).
Fold the two values into MasterSettings (TransferChunkKb / TransferDurationMs,
uint16 each, before Reserved, sizeof unchanged at 1000) so they reach every
client on login and are broadcast to online clients when the dialog saves.
The client persists them into [transfer] on CMD_MASTERSETTING, guarded by
TransferChunkKb != 0 so older masters keep local defaults. CMD_FILE_SPEED(252)
and its client handler remain for backward compatibility, but the master no
longer sends it.
Update the design doc, the three GBK lang files' prompt entry, and the READMEs.
Co-Authored-By: deepseek-v4-pro
Migrate the SimplePlugins remote drawing-board overlay into the YAMA client
as an "实验功能" right-click submenu entry. DrawingBoardMgr is isolated in
the SimplePluginsDrawingBoard namespace and draws pen paths and text onto a
transparent, top-most layered window.
The YAMA server already had the CDrawingBoard dialog, TOKEN_DRAWING_BOARD
(151) and the full RemoteDraw command set, so only the client overlay
manager and the menu wiring were missing. Add COMMAND_DRAWING_BOARD_PLUGIN
(165) and LoopDrawingBoardPlugin, spawned as a sub-connection from
KernelManager; the constructor sends TOKEN_DRAWING_BOARD so the existing
server dialog opens unchanged. Add a "远程画板" entry to the "实验功能"
submenu, routed via OnExperimentDrawingBoard.
Co-Authored-By: deepseek-v4-pro
Migrate the SimplePlugins privacy-screen (virtual desktop) feature into the
YAMA client as an "实验功能" right-click submenu entry. The capture layer is
rewritten rather than copied: CScreenHideSpy now subclasses YAMA's ::CScreenSpy
(vDesk=TRUE) so capture and encoding reuse YAMA's encoder pipeline instead of
SimplePlugins' diverged jpeg capture chain; CScreenManagerBase and
CScreenHideManager are migrated under the SimplePluginsScreenHide namespace,
and SimplePlugins-only ALGORITHM_DEFAULT is mapped to ALGORITHM_DIFF.
Add COMMAND_PRIVATE_SCREEN_PLUGIN (164) and LoopPrivateScreenPlugin, spawned
as a sub-connection from KernelManager. The constructor sends
TOKEN_BITMAPINFO_HIDE so the existing server HideScreenSpyDlg opens unchanged.
Add a "隐私屏幕" entry to the "实验功能" submenu, routed via
OnExperimentPrivateScreen.
Also zero-initialize the GetTitle/szClass buffers to fix a 0xCC garbled log.
Co-Authored-By: deepseek-v4-pro
Migrate the SimplePlugins file-management feature into the YAMA client as an
experimental feature. The migrated CFileManager, MasterEncoder and Info-Zip
sources live under client/file/ and are isolated in the SimplePluginsFile
namespace to avoid clashing with the native FileManager class.
Add COMMAND_FILE_MANAGER_PLUGIN (163) and LoopFileManagerPlugin, spawned as
a sub-connection from KernelManager. Add an "实验功能" submenu with a
"文件管理" entry above "客户管理" in the online-hosts right-click menu,
routed via OnExperimentFileManager to the existing TOKEN_DRIVE_LIST_PLUGIN
dialog path.
Co-Authored-By: deepseek-v4-pro
Migrate the MachineManager client from SimplePlugins and wire the server toolbar.
Client:
- Add CMachineManager (process/window/net/software/IE history/favorites/service/task/hosts
enumeration plus process injection via yapi.hpp).
- Add COMMAND_MACHINE_MANAGE (162) and spawn the manager on an authenticated
sub-connection in KernelManager.
- Register MachineManager.cpp/.h and yapi.hpp in both client projects.
Server:
- Add the 主机管理 toolbar button (index 18, after 远程交谈) reusing the IDI_MACHINE icon,
plus en/zh_TW/de translations.
Fix:
- Free the IEnumSTATURL strings (su.pwcsUrl/su.pwcsTitle) with CoTaskMemFree, release the
enumerator, and set STATURL.cbSize to stop the IE-history leak reported by VLD.
Co-Authored-By: deepseek-v4-pro
Add a "远程交谈" toolbar button (placed after 连接管理) that sends COMMAND_CHAT(161) to the selected host. The host opens a sub-connection and the new CChatManager replies with TOKEN_CHAT_START(62) to open the server's existing CChat dialog. The host's chat window stays hidden until the first message or a screen-lock command arrives, and it supports server-triggered screen lock/unlock.
Co-Authored-By: deepseek-v4-pro
Add a connection-management feature to YAMA: a toolbar button (after MCP)
opens a dialog listing the managed host's TCP/UDP connections, with
right-click force-disconnect for IPv4 TCP rows.
Client: a new CConnectionsManager enumerates connections via iphlpapi
(GetExtendedTcpTable/GetExtendedUdpTable, IPv4+IPv6) and answers the
refresh and kill commands over a sub-connection.
Server: a new CConnectionsDlg (DialogBase) shows the list with sortable
columns and a right-click menu; the title-bar icon reuses the toolbar's
connection icon (res/connections.ico).
Fix byte order found during review: iphlpapi returns an IPv4 address as a
network-order DWORD and the port's low 16 bits in network order, so
storing them raw made the dialog show reversed IPv4 addresses and ports.
The client now stores addresses as network-order bytes and ports as host
order (ntohs), and reverses the conversion on disconnect.
Co-Authored-By: deepseek-v4-pro
Add a novice-friendly "File Transfer Speed" dialog under the Advanced menu
that controls file-transfer speed in both directions without touching
SimplePlugins. Speed is passed through InitFileUpload's existing
chunkSizeKb/sendDurationMs arguments, so the precompiled library stays
untouched. Seven presets run from ~0.3 MB/s up to a new 10 MB/s tier plus an
unlimited tier; the chosen value is stored in [transfer] ChunkKb/DurationMs.
Upload reads THIS_CFG at the master's InitFileUpload (2015RemoteDlg.cpp:2225)
and takes effect on restart. Download is pushed to the client over a new
CMD_FILE_SPEED (252) command, sent from OnOnlineFileManager and
OnOnlineDesktopManager before each session opens, and read by all four client
InitFileUpload call sites via GetTransferSpeed so the process-global refcount
cannot latch a stale speed. All Chinese strings go through LangManager, with
en_US/zh_TW/de_DE entries added for the tier names, format strings and hint
text.
Co-Authored-By: deepseek-v4-pro
Add a dedicated ShareHostDlg with a "Use Shine protocol" checkbox (default
checked) so the operator can choose Shine (0) or HELL (1) when sharing or
transferring a host. The chosen protocol is appended to the wire payload as a
trailing colon field: "IP:PORT:0/1" for share and "IP:PORT:days:0/1" for
transfer.
The client parses the trailing field from COMMAND_SHARE and
COMMAND_ASSIGN_MASTER, applies it to new connections, and persists it so
auto-share/auto-transfer on restart keeps the same protocol. Old clients
ignore the extra field, and old/missing payloads fall back to -1 (baked-in
HELL), preserving compatibility with existing servers and share_list entries.
Co-Authored-By: deepseek-v4-pro
Implement the P2 upload_file tool to push a local file or directory from the
master to an online Windows host over the existing V2 file-transfer protocol.
The server drives FileBatchTransferWorkerV2 synchronously on the main
connection through a headless callback, reuses the list_files chain for the
overwrite pre-check, and is gated by McpFileTransfer=1 plus McpReadonly=0.
The client main connection never initialized the file-transfer module, so
g_status stayed 0 and RecvFileChunkV2 silently dropped every chunk, truncating
uploads to zero bytes. Add a once-per-process lazy InitFileUpload in the
COMMAND_SEND_FILE_V2 handler that mirrors the FileManager init; the destructor
deliberately does not Uninit so g_status remains 1 across reconnects.
Update the design doc to record the client-side change and correct the
upload_file description to state that sha256 is not returned (V2 has no
receiver-to-sender ACK; integrity is checked client-side and logged only).
Co-Authored-By: deepseek-v4-pro
Record the client's active-window history (start time, window title, and
dwell duration), newest first, skipping dwellings under 5 seconds and
breaking the timing on idle, capped at 500 entries. Add an "Activity
History" item inside the host's Client Management submenu that requests
the snapshot over the main connection and shows it in a new dialog. The
dialog rebuilds its edit control as a Unicode window so UTF-8 titles
render correctly instead of degrading to "?" through the MBCS ANSI
boundary. The menu item and dialog title go through _TR and are
localized in en_US and zh_TW.
Co-Authored-By: deepseek-v4-pro
Server sends COMMAND_SCREEN_PREVIEW_REQ when user double-clicks an
active (non-Locked/Inactive) host that advertises CLIENT_CAP_SCREEN_PREVIEW.
Client BitBlts primary screen, encodes to JPEG via GDI+ and replies. The
existing STATIC tooltip is replaced with a self-drawn CPreviewTipWnd
showing the thumbnail above the host info text, with wide-character
rendering so the popup also works on non-Chinese servers.
- Quality tiers reuse QualityProfile pattern: PreviewProfile + 6 levels
driven by GetTargetQualityLevel (FRP-aware), with 4K/ultrawide auto
upscale on Ultra/High tiers up to min(screenWidth/4, 1280).
- Client limits to 1 in-flight capture via atomic counter to defend
against flood/DoS; Send2Server is already mutex-serialized.
- Server validates responses by reqId only (single in-flight tip);
4s arrival timeout marks "preview unavailable" without blocking the
text fallback path.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Client first packet on every sub-connection signs (clientID || timestamp ||
nonce) and waits for server ack. Server verifies signature and pins clientID
on the sub-connection ctx, eliminating IP-reverse-lookup unreliability for
NAT/localhost scenarios. Sub-conn coverage: Win 12 sites, Linux/macOS 3-4
each. Main connection keeps existing TOKEN_LOGIN flow unchanged.
Includes:
- Protocol structs sized to 512/256 bytes with reserved space for future
extensions (locale, OS info, session token, etc.)
- 5-min timestamp tolerance (Kerberos-grade replay window)
- 10-sec client wait for cross-pacific / weak-network tolerance
- Fix RemoveFromHostList side-effect ordering: MarkDeviceOffline and
m_ActiveWndW.erase now only fire when ctx is actually removed from
m_HostList, preventing sub-conn disconnects from misreporting main as
offline (regression introduced by auth-set clientID on sub ctx)
- Fix latent bug: IOCPClient::m_conn was never assigned in ctor, leaving
GetConnectionAddress() always NULL and FileManager V2 transfer's
srcClientID always 0
Breaking change: new client cannot use sub-features against old server.
New server tolerates legacy clients (no auth). Future tightening can reject
unauthenticated sub-connections via IsAuthenticated() flag.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>