Commit Graph
28 Commits
Author SHA1 Message Date
yuanyuanxiang 356aa27108 Feature: Reject MCP tool calls the target client cannot handle
tools/list 不带参数,无法按目标设备过滤工具列表。60 个工具里有 33 个只在
Windows 客户端上有实现,模型无从得知,只能下发命令后白等超时。

DispatchSingleHostTool 开头按 kToolPlatforms 表核对目标主机平台,不匹配立刻
返回 -32005;批量路径经由同一函数自动覆盖。主机不存在或离线时放行,把 -32002
留给工具自己报,避免同一个问题出现两种错误码。

支持面是刻意设计的阶梯:win 60/60、lnx 27、mac 16、apk 10。60 个工具全部含
win,所以 Windows 客户端永远不会被这道门禁拒绝,行为与改动前完全一致。

平台表按服务端实际放行来标,不按客户端能力标。两处会分叉的地方:

- exec_command / terminal_* / kill_process:macOS 客户端有实现(main.mm:753 的
  ShellworkingThread、SystemManager 的 KILLPROCESS),但服务端刻意拦着
  (McpServer.cpp:3652「macOS 本轮不开放」、6870),故标 win+lnx。
- list_windows:Linux/macOS 的 SystemManager 都有 COMMAND_WSLIST 分支,但
  BuildListWindows 把命令发在主连接上,而这两个平台的主循环只处理 COMMAND_SYSTEM
  (起子连接),WSLIST 只在子连接里才被处理,走不到。实测 Linux 上直接超时
  -32001。那两个 case 是给 SystemDlg 用的,故标 win。

copy_files_c2c 是唯一的非对称工具(源端必须 Windows,目标端可 win/lnx/mac,
反向不支持),用 roles 按参数名分别声明,C++ 侧 CollectTargetReqs 对应处理。

配套 mcp/tools.json(60 个工具,version 2)与 tools/mcp_tools/ 下的抓取、生成、
比对、校验脚本。check_platform_table.py 校验 C++ 表、tools.json、instructions
三方一致,并把「Windows 全量」做成不变式。

已在 A6(Windows 11)与 Ubuntu24(Linux)上实测:Windows 侧 14/14 通过且无误拒,
Linux 侧 11 项拒绝全部命中门禁,copy_files_c2c win->lnx 成功、lnx->win 被拒。

开关 McpPlatformGuard(默认 1),关闭只失去提前拦截,不影响任何执行路径。
2026-11-03 16:06:41 +01:00
yuanyuanxianganddeepseek-flash 1c832ff7f2 Feature: Add MCP cancellation, progress notifications and dry runs
P11 closes the plan's last batch, entirely on the server side: no client
change is required for any of it.

Long-running tools now expose a cancellation flag that every wait loop
checks in 500 ms slices. A cancelled tool returns through the cleanup
branch it already had (late first packets still get absorbed, sub
connections still get closed, pending entries still get deleted), so
there is no second cleanup path to keep in sync, and the host is released
within a second. Three sources set the flag: notifications/cancelled
(matched on the exact JSON-RPC id, with a fallback to the display form so
a request_id copied out of the session list round-trips), mcp_cancel_session
(by request_id, host id or session id), and a failed SSE write when the
client has gone away. The dispatcher rewrites a cancel-induced failure to
-32800 so callers do not mistake it for a host fault.

tools/call requests carrying _meta.progressToken are answered as
text/event-stream on the same POST: the tool runs on its own thread and
both the notifications/progress events and the final JSON-RPC response go
out through one chunked provider. Requests without a token are unchanged.
download_file reports files done vs. expected, upload_file reports bytes
sent vs. total.

Two new local-only tools, mcp_list_sessions and mcp_cancel_session, list
and cancel in-flight sessions (calls, pending one-shots, terminal, remote
control, file transfer, chat). They are deliberately not gated by the
feature switches or readonly mode, since that is the only way out of a
stuck request. The -32003 busy message now names the occupier:
"Device busy: ... (tool=download_file, elapsed=12s)".

power_action gains wait/wait_ms to verify the result against the main
connection's presence (went_offline, came_back, elapsed_ms); not seeing
the transition is reported as ok, not as a failure. kill_process,
operate_window and the four host_control_* tools accept dry_run, which
validates the target against one fresh snapshot and returns what would be
affected without sending anything. Validation rejections now use -32012;
-32008 stays as documented historical alias.

One implementation note worth recording: the per-thread call context uses
FLS, not thread_local. Any static thread_local in this server crashes the
process about a second after start, because some threads come from
shellcode/MemoryModule images that never ran PE TLS initialisation.

Verified against a real Debug server and a real Windows client over MCP:
the smoke test now passes 104 checks with 0 failures, including
cancellation releasing the host in under a second, the cancelled request
returning -32800, notifications/cancelled returning 202, 63 progress
events with exact byte counts for a 64 MB upload, and a cleanly
terminated SSE stream. Not exercised in this pass: power_action's
wait=true path (it would take the test host down) and the -32006
readonly/switch-off section (every switch was on during the run).

Co-Authored-By: deepseek-flash
2026-10-28 21:25:49 +01:00
yuanyuanxianganddeepseek-flash 3d388f8e45 Feature: Add remote_block_input to MCP remote control
A GUI automation run is interrupted the moment a person at the host touches
the mouse, and locking the host's keyboard and mouse is the standard answer.
The client already implements COMMAND_SCREEN_BLOCK_INPUT and the MFC screen
window already sends it, so the tool needs no client change: it puts the same
two-byte packet [COMMAND_SCREEN_BLOCK_INPUT][0|1] on the hidden screen
sub-connection that remote_open established. The gate is remote_open's own -
McpRemoteControl=1 and McpReadonly=0 - because the ability to lock someone out
deserves exactly the same door as the ability to drive their desktop, and
Linux and Android clients are refused with -32005: they have no branch for
this packet at all and would silently ignore it.

Locking a host out is only acceptable if every way back in is closed, so the
session now carries its own lock state and three paths release it. block=false
releases it directly. block=true always carries a deadline (max_block_ms,
default 300000, clamped to 1000..3600000) and a watchdog thread started with
the MCP server sweeps every 500ms for expired locks, sends the release and
records it; the next remote_block_input reports it as auto_unblocked so the
model learns that its lock lapsed instead of assuming it is still held.
remote_close and the idle reclaim both send block=false before they tear the
sub-connection down, because once that connection is gone the server has no
channel left and a live client process stays blocked - all three release
paths write an audit line, since none of them is something a person can see.

The send happens outside the MCP lock, and the watchdog takes the session's
busy flag while it releases, so it cannot interleave with an injection or race
a close; a failed send keeps the lock marked and retries five seconds later
rather than hammering a dead connection every tick, and a session that dies
under the watchdog is erased the same way an injection would erase it.

Verified against a real Windows client over MCP on a Debug x64 build: block
then unblock, block with a 1.5-2s deadline left to expire and reported back as
auto_unblocked with the watchdog audit entry at the expected second, block
with a ten-minute deadline then remote_close with "(input lock forced off)"
in the audit, and the five refusals (missing block, non-boolean block,
max_block_ms out of range, unknown session, offline host). The smoke test
gained [4d] for those refusals; 54 checks pass. Two limits are worth stating
plainly. BlockInput only works when the calling process is elevated (or
UIAccess), the client ignores the API's return value, so on an ordinary
client the lock silently does nothing and the tool can only promise that the
command was delivered - both the tool description and the server instructions
say so. And the idle-reclaim release, like the two verified paths, is only
exercised at a 300s idle timeout; it shares the same send helper and was
reviewed rather than timed out live. Bin/settings.ini was restored
byte-exact and the Release instance was left alone.

Co-Authored-By: deepseek-flash
2026-10-28 21:25:47 +01:00
yuanyuanxianganddeepseek-flash 27b5431130 Feature: Add the file-write tools behind their own switch
P10-B adds delete_path, move_path and create_folder, and the switch they
need. Reusing McpFileTransfer would have been wrong: uploading overwrites a
file, deleting destroys a tree, and an operator who wants one may well not
want the other. McpFileWrite is therefore a separate key, off by default,
wired the way every other switch is - read from settings.ini at startup,
reported as get_server_status.switches.file_write, and exposed with its own
checkbox in the MCP settings dialog. The tools additionally require readonly
to be off: a read-only server has no business modifying a host.

No client change was needed: COMMAND_DELETE_FILE, COMMAND_DELETE_DIRECTORY,
COMMAND_CREATE_FOLDER and COMMAND_RENAME_FILE already existed in the Windows
file manager. The chain reuses the file-manager sub-connection and adds a
phase - the main connection asks for the drive list, the sub-connection's
first packet hands it to OnDriveList which sends the write command, and the
client's TOKEN_*_FINISH ack moves the pending request from phase 0 to 1,
where the tool sends COMMAND_LIST_FILES for the parent so the ack and the
confirmation share one timeout. Only the IO thread touches the
sub-connection; the tool thread just waits on the shared condvar, which keeps
the sub-connection's lifetime out of its reach.

The confirmation exists because the client answers unconditionally: it
ignores the return values of DeleteFile, MoveFile and
MakeSureDirectoryPathExists and there is no error token. ok therefore only
means "the command arrived", and verified is the real answer - true when the
parent listing shows the expected post-state, false when it shows the
opposite, null when the listing itself did not come back (timeout or
disconnect), since reporting that as false would be a lie. Linux, macOS and
Android hosts are refused outright: those clients decode these paths as GBK
while the server speaks UTF-8 to them for list_files, so a non-ASCII path
would corrupt rather than fail. Paths are validated as UTF-8, converted to
GBK exactly once, and reject %VAR%, relative paths, drive and share roots,
and - for delete_path and for move_path's source - the Windows, Program
Files, ProgramData, $Recycle.Bin and System Volume Information trees.
create_folder gets no system-directory ban, because writing there is the same
permission upload_file already has.

Two defects surfaced while exercising this against a real client:
create_folder's wire path has to end with a backslash, because
MakeSureDirectoryPathExists treats a non-terminated last component as a file
name and only creates the intermediate levels; and
ResolveFileOpVerified(LookupInListing(...), isDir, ...) read isDir before the
lookup ever set it - argument evaluation order is unspecified and MSVC
evaluates right to left - so every create_folder reported verified=false even
when the directory existed.

Verified on a Debug x64 build against a Windows client over MCP: nested
create_folder, upload, rename, delete, delete a tree, the failure shapes
(delete with recursive=false on a directory, create_folder onto an existing
file name, delete of a non-existent target) and every refusal (drive root,
C:\Windows\Temp, C:\Users, %TEMP%, relative, empty, over-long, from==to,
offline host, non-numeric id), with a Chinese-named directory created,
renamed and deleted end to end; no file-manager window appeared in the server
process during any of it. The smoke test gained section [4c], opt-in through
-FileWriteDir, which asserts verified and never ok and walks a sandbox
through the same path; two runs passed 69 checks with the sandbox removed
afterwards. Bin/settings.ini was restored byte-exact and the Release
instance was left alone.

Co-Authored-By: deepseek-flash
2026-10-28 21:25:46 +01:00
yuanyuanxianganddeepseek-flash 3a158a241c Feature: Support upload_file and download_file on Linux and macOS hosts
Both tools used to reject LNX/MAC targets outright. The server now gates
on the target client type instead: a POSIX target must pass an absolute
POSIX remote path without a backslash or a ".." segment (-32602
otherwise), while Windows targets keep their exact previous behaviour.

upload_file needed no new client command; the POSIX receiver already
handles COMMAND_SEND_FILE_V2 and derives the destination from the packet
name. It now also reports a real receiver_ack: the upload session
records dstClientID/transferID, and OnC2CRecvResult matches the 176
acknowledgement from Linux targets, so a destination write failure
becomes -32011 and a missing ack (with bytes in flight) becomes -32001.

download_file needed two pieces on the POSIX side, both shared by Linux
and macOS through common/FileTransferV2.h: a FileCompletePacketV2 per
file with a streaming SHA-256 (new self-contained common/sha256_posix.h,
since BCrypt is Windows-only) so the server can count completed files
and verify digests, and a TOKEN_DOWNLOAD_ERROR reply when the requested
paths do not exist or are denied, which the server maps to
-32009/-32010 within milliseconds instead of waiting for the stall
watchdog.

Zero-byte files were lost when uploading to POSIX targets because the
worker sends no data chunk for them and the complete packet carries no
path, so the receiver had nothing to create. The server now injects a
zero-length final chunk for each empty file, only for POSIX targets;
Windows targets keep their existing behaviour.

Also fixes a download completion edge case found while testing: the
client decides entry order, so a directory may arrive after all files
(an empty subdirectory, for example), and the directory branch only
completed when the directory count alone covered totalFiles. The check
is now filesDone + directoryCount >= totalFiles.

Verified end to end against a WSL Linux client and a Windows client:
upload and download of a tree with a 3 MB binary, a Chinese filename, an
empty file and an empty subdirectory all round-trip with matching
SHA-256; the documented error paths (-32602, -32009, -32011, -32001) and
the Windows upload/download/C2C regressions were exercised as well.

Co-Authored-By: deepseek-flash
2026-10-27 20:39:22 +01:00
yuanyuanxianganddeepseek-flash 4146c73657 Feature: Make Linux a copy_files_c2c destination
The C2C file transfer tool required both ends to be Windows clients. A Linux
client can already land the files: the Windows source worker builds every
entry name by plain string concatenation of dst_dir and the relative path, so
a POSIX dst_dir such as /tmp/recv arrives as "/tmp/recv\sub\file", which the
POSIX receiver normalizes to "/" and writes below an absolute path. What was
missing was the server gate and any way to tell whether the writes succeeded.

The server now accepts LNX/MAC destinations instead of rejecting them, and
validates dst_dir by destination type: an absolute Windows path for Windows
targets, an absolute POSIX path without backslashes for POSIX targets. The
paths and dst_dir arguments also reject embedded NULs, and a POSIX dst_dir is
converted to CP936 exactly so unencodable characters fail loudly instead of
silently becoming '?'.

To make receiver_ack meaningful, a Linux client that receives a C2C transfer
now reports what it wrote. It tracks the outcome per transferID, counting a
directory entry, the last chunk of a file and the completion packet of an
empty file as the three ways an item is settled, with done sets so that
source retries and the trailing completion packet never double count. When
every item is settled it sends one C2CSendResultPacket back on its main
connection under the new TOKEN_C2C_RECV_RESULT (176), with the first errno in
the win32err field and the mapped FEV2_* status. A dedicated token is used
instead of reusing 175 because a host can be the destination of one transfer
while being the source of another, and a destination result must never latch
the source side's done flag.

The server waits up to five seconds for that acknowledgement after the source
reports success, and only for destinations advertising the new
CLIENT_CAP_C2C_RECV_ACK capability bit (Linux only, macOS reports nothing).
A failed acknowledgement becomes -32011 with the status, errno and received
file count; a missing acknowledgement stays an error only for transfers that
actually moved bytes, since a transfer of empty files alone gives the
receiver nothing to learn totalFiles from. Windows destinations are unchanged
and skip the wait entirely.

Verified on the debug instance: Windows to Linux (WSL Ubuntu 24.04) with
subdirectories, an empty directory, a Chinese file name and a 3 MB binary
lands with matching SHA-256 and receiver_ack true; a Windows-style dst_dir
returns -32602; an unwritable POSIX destination returns -32011; the existing
Windows to Windows cases still pass with receiver_ack false and the same
latency.

Co-Authored-By: deepseek-flash
2026-10-27 19:22:12 +01:00
yuanyuanxianganddeepseek-flash c271911fcb Feature: Add copy_files_c2c to transfer files between clients directly
Adds the 54th MCP tool, copy_files_c2c, which asks the source client to
push a set of files straight to another online client. Previously the only
way to move files between two clients was to download them to the server
machine and upload them again, so the data crossed the wire twice and
needed free disk on the server. With C2C the server only relays packets
and never parses or stores the payload.

Protocol. Two new ids in common/commands.h: COMMAND_C2C_SEND_FILES (174),
carrying the destination directory followed by a NUL-separated path list,
and TOKEN_C2C_SEND_RESULT (175), a fixed 45-byte result packet sent back
over the same sub-connection the transfer used. Clients advertise support
with the LOGIN_INFOR capability bit CLIENT_CAP_C2C_PATHS (0x0008), exposed
server side as Context::SupportsC2CPaths(). File transfer V2 already knew
how to push to dstClientID, so the destination side needed no change at
all; existing V2 receive paths keep working, and older clients simply do
not advertise the bit and are rejected with a clear error instead of
hanging.

Client. OnC2CSendFiles expands environment variables, collects directories
recursively, opens its own sub-connection (with sub-connection auth), and
runs FileBatchTransferWorkerV2 in a detached thread, then reports the
result on that same connection. Every early exit now reports a structured
failure rather than staying silent. The worker needs the process-level
InitFileUpload call that the receive path performs lazily, and a source
client may never have opened a file manager or received an upload, so the
initialization is factored into EnsureV2TransferInited() and called from
both paths.

Server. copy_files_c2c mirrors the existing upload tool: gates, id parsing,
capability checks, path validation, then a session keyed on the source host
that WaitC2CDone polls until the result packet arrives. The C2C relay
branch used to attach a CDlgFileSend progress dialog to the source's
sub-connection; NotifyProc then routed every later packet on that
connection to the dialog, which parsed the result packet as a V1 file
chunk and dropped it, so the tool always timed out even though the files
had arrived. IsC2CTransferPending() now suppresses dialog creation for
MCP-driven transfers only, leaving manual Ctrl+V transfers untouched.
Errors map to -32001 for a source-side transfer failure, -32010 for access
denied, -32009 for a missing path and -32002 for an offline destination.
Both hosts must be Windows: the destination is restricted too, because the
source embeds dst_dir in each V2 chunk name as an absolute Windows path and
only the Windows receiver applies it literally. A Linux or macOS receiver
never gets a target directory here (the clipboard flow sets one with
COMMAND_C2C_PREPARE, which this path does not send), so it would strip the
drive letter and write under / instead. Supporting that needs a prepare
packet carrying an explicit path plus an upgrade of those clients, so for
now the tool rejects them with -32005 rather than writing somewhere wrong.

Verified end to end on the Debug build: three files including a non-ASCII
name, an empty directory and a 3 MB binary arrived with matching SHA-256
in 3.2 s, a non-existent destination directory was created, and the
negative cases returned the documented codes. mcp_smoke.ps1 passes 41/41
with two new assertions and 27/27 in -SkipHost mode. Design notes, error
table and limitations are in docs/Mcp_FileTransfer_Design.md section 14
and docs/Mcp_Design.md section 15.

Co-Authored-By: deepseek-flash
2026-10-26 15:38:07 +01:00
yuanyuanxianganddeepseek-flash a7dd86ff0f Feature: Terminate TLS for the MCP endpoint inside YAMA
MCP was served by a plain httplib::Server, so remote clients could only use
cleartext HTTP. YAMA now terminates TLS itself: a small front-end owns the
MCP port, sniffs the first byte and either runs a Schannel handshake and
forwards the decrypted bytes or passes plaintext through, with httplib
moving to a loopback-only internal port. No OpenSSL, no frp change, existing
local HTTP clients keep working, and an unusable certificate fails closed
instead of falling back to cleartext.

The identity loader grew the two things a public certificate needs. ECDSA
(P-256/P-384/P-521) keys are persisted by importing PKCS#8 with an
NCRYPTBUFFER_PKCS_KEY_NAME parameter, the only route MS Software KSP
supports for Schannel; RSA keeps its old export-and-repersist path.
Fullchains are accepted, and the intermediates are added to the current
user's CA store so Schannel, which builds chains only from system stores,
actually sends them. The shared handshake also now buffers a full TLS
record before the first AcceptSecurityContext, which a partial ClientHello
would otherwise poison (SEC_E_UNKNOWN_CREDENTIALS).

Session resumption exposed a second trap: when a client resumes a session,
ChangeCipherSpec, Finished and the first application record arrive in one
segment and AcceptSecurityContext leaves the application record pending in
the session. Nothing drained it, because both callers only decrypt when new
ciphertext arrives, so the request waited until the peer gave up (the MCP
front-end saw no request at all and the client reported "fetch failed
(other side closed)"; the device port had the same hole behind its
occasional login timeouts). Decrypt now drains pending data on len == 0, and
both the front-end and the device port's handshake thread use it before
entering their receive loops.

Configuration is McpHttps, McpCertPath, McpKeyPath and McpInternalPort, the
first three editable in the MCP settings dialog (the certificate rows stay
greyed out until HTTPS is enabled and saving rejects missing files).

Verified with a real Let's Encrypt ECDSA fullchain (53 tools over TLS, 401
with no or bad token), a local three-level chain whose intermediate was
absent from the store, Node 24's fetch on a resumed session (initialize,
notifications/initialized and tools/list all complete), and the device
port's RSA handshake as a regression check. Details in docs/Mcp_Design.md
section 13.

Co-Authored-By: deepseek-flash
2026-10-26 13:56:41 +01:00
yuanyuanxianganddeepseek-flash b4cb34fea9 Fix: Stop MCP tool timeouts from popping MFC dialogs
A sub-connection's first packet doubles as the readiness packet: the file,
service, registry, process, log and terminal tools all get answered that way.
Once a tool has given up (timeout or failure) its pending entry is gone, so if
the client only gets around to sending that first packet afterwards,
MessageHandle cannot tell it apart from a human click and opens the matching
modeless dialog - a File Manager window appeared while timeouts were being
exercised on this machine.

The wait paths now record, per device, which first-packet token the abandoned
tool would have sent (MarkLateFirstPacketForTool from WaitPending,
WaitPendingRegistry, WaitPendingWrite, WaitFileTransferDone and
WaitTerminalReady), and every dialog-opening case consumes that marker before
falling back to the MFC path. The marker is one-shot, expires after five
minutes and is never set on the success path, so normal use is unaffected; the
worst case is that a single manual open on a host that just had an MCP timeout
is swallowed.

ClientMsg packets are dropped with a log line while a tool is pending for that
host: new clients still send the legacy popup message alongside the structured
failure token, which would otherwise put a modal box on the server UI during an
MCP call.

Co-Authored-By: deepseek-flash
2026-10-25 18:12:56 +01:00
yuanyuanxianganddeepseek-flash 3b1626f415 Feature: Turn client failure reports into branchable MCP errors
Wire the four new failure tokens into MessageHandle and translate them
in the tool builders, so the three previously silent failures now return
a code an agent can branch on: list_services on a non-elevated client is
-32010 in well under a second instead of a 20 s timeout, list_files and
list_registry distinguish a missing path or key (-32009) from an empty
one, and download_file no longer waits for the stall watchdog when the
remote path does not exist. Access denied gets its own code, -32010, and
the win32 code is kept in the message for every case.

TakeRegError fills both registry wait flags in one packet because a
failing client sends no subkey or value packet at all. OnDownloadError
sets the session error without cancelling the file-manager sub-connection,
which stays owned by ClearFileTransfer. ListRemoteTopLevelNames treats
"not found" as "directory not created yet" so uploading into a fresh
directory keeps working now that the client reports it.

Also converge the error codes that were overloaded: a multi-monitor host
is a capability limit, not a parameter mistake, so remote_open reports
-32005 instead of -32008. The tool wait timeout moves from a compile-time
constant to McpToolTimeoutMs in settings.ini (default 20000, clamped to
1-600 s), which makes it possible to tune without a rebuild.

The smoke test gains the three reproducible negatives.

Co-Authored-By: deepseek-flash
2026-10-25 17:59:21 +01:00
yuanyuanxianganddeepseek-flash eaa10cc7d3 Fix: Make the MCP command sentinel robust and fail stalled downloads fast
Re-verified every finding of the 2026-10-25 MCP test report against the source and
then end-to-end on the Debug instance, and fixed the ones that live on the server.

P1/P3/P4 share one root cause: the sentinel was appended to the command line, so any
command that swallows the rest of its line (rem, cmd /c, if, for) swallowed the
sentinel too and the call always timed out. On ConPTY clients the command and the
sentinel are now sent as two lines, the sentinel prints %errorlevel% (whose echoed
text is a literal template, not digits) so folding echo can no longer be mistaken
for the sentinel, and FindSentinel returns the real exit code (9009, 1, 0, ...)
instead of 0/1. Old non-PTY clients keep the single-line form, since their echo
skipping depends on the write length.

ConPTY also returns a rendered screen stream rather than a byte stream, so stripped
VT sequences leave duplicate text behind; output cleaning now cuts through the
echoed command line, strips the echoed sentinel line and erases any leftover
sentinel text by its per-command nonce. StripAnsi no longer leaves the backslash of
an OSC terminated by ST.

A terminal session destroyed by a timeout used to report the same "not found" text
as a typo in the session id; a 600s tombstone now says what happened instead.
download_file gets a stall watchdog: no data for 60s fails with a clear message and
releases the host, where a missing remote path used to hold the whole host for the
full 600s default timeout.

Also corrects the get_activity_history annotation (it does reach the remote host),
completes the -32007/-32008/-32009 error table, documents the sentinel design in
Mcp_Design.md 12.1, and corrects the report's claim that the tools blocked during a
transfer are local DB reads -- they are remote machine-manager fetches, and purely
server-local tools are unaffected.

Co-Authored-By: deepseek-flash
2026-10-25 17:09:39 +01:00
yuanyuanxianganddeepseek-flash 5ce453797c Feature: Add a get_server_status tool to the MCP server
Answering "did my rebuild actually take effect" or "why was that tool
refused" used to mean reading list_online_hosts and get_audit_log and
inferring the rest. A single read-only call now returns the server's own
state: brand and version, the exe link time (taken from the file's last
write, which unlike __DATE__ reflects the whole build), how long the
process has been up, the address and port MCP is actually listening on,
every MCP switch, online and offline host counts, the number of sessions
in flight per family, and how many source IPs are currently blocked.

The bind and port are recorded by Start rather than re-read from the
configuration, so the tool reports what the listener really got. Session
counters take each subsystem's lock in turn and release it immediately,
so the numbers are an estimate of one moment, not a consistent snapshot.
Nothing sensitive is exposed: the token and the command whitelist never
appear, and the switches are reported as booleans only.

The tool is registered as read-only, non-destructive, idempotent and
server-local, which brings tools/list to 53 entries. The smoke test gains
three checks for it, including one that fails if a token-shaped field
ever appears in the output.

Verified on the Debug instance: the summary line reports version, uptime
and listener correctly, sessions.terminal goes 0 to 1 while a persistent
terminal is open and back to 0 after terminal_close, and the smoke test
passes 26/26.

Co-Authored-By: deepseek-flash
2026-10-25 14:35:19 +01:00
yuanyuanxianganddeepseek-flash 16f23e164c Fix: Clear the file transfer session when its sub-connection drops
A file transfer session holds raw pointers to its file-manager and
stream sub-connections, but nothing on the offline path looked at them.
OfflineProc cleans up terminal, remote-control and chat sessions and
skipped file transfers entirely, so a client that disconnected in the
middle of a transfer left the session pointing at a context that went
back to the connection pool. When the tool thread timed out it called
CancelIO on that stale pointer, which could cancel somebody else's
connection.

Add a context-to-device table next to the sessions, kept under the same
mutex and erased by ClearFileTransfer so a recycled pointer is never
mistaken for a live one. OfflineProc now calls
OnFileTransferContextClosed, which drops both pointers. A dropped
stream sub-connection means the transfer cannot complete, so it also
fails the session with error 1003 and wakes the waiting thread; the
file-manager sub-connection only issues the command and its loss is not
treated as a failure of the transfer itself.

Verified against the debug client: killing it 1.2 s into a 500 MB
download returns "Connection lost: the transfer sub-connection closed"
after about 1 s instead of waiting out timeout_ms, and the server stays
up. After the client restarts, two consecutive downloads and one upload
still work.

Co-Authored-By: deepseek-flash
2026-10-25 14:20:13 +01:00
yuanyuanxianganddeepseek-flash abe7e99a77 Feature: Harden the MCP transport and add non-destructive host tools
Cap MCP request bodies at 2 MB, set a 15 s idle read timeout and a 60 s
write timeout, and give httplib an explicit 32-thread pool: long tools
such as chat_wait hold a worker for up to 55 s, and the default pool of
8 to 15 left other callers queued.

Every tool returned by tools/list now carries readOnlyHint,
destructiveHint, idempotentHint and openWorldHint. The table is
per-tool; anything not registered defaults to destructive so a new
write tool cannot silently look harmless. Read-only tools are forced
to destructiveHint=false.

get_host_detail appends the technical fields the host store already
holds (cpuCores, memoryGB, systemBits, programBits, user, isAdmin,
installTime, expiredDate, monitors, exeVersion, clientPath, pid,
publicIp). The JSON writer is pinned to 15 significant digits so
memoryGB renders as 27.8 instead of 27.800000000000001. list hosts
output is unchanged.

Add host_set_remark and host_set_watch_level. Both validate the host
against the store, are refused in readonly mode, repaint the affected
row, and are audited without recording the value written.

Add search_file, which drives the client file-manager search channel
and returns paged results. The root path is normalized before sending:
the client enumerates with wsprintf("%s\*.*"), so a trailing
backslash produced C:\*.* and FindFirstFile failed, returning zero
hits instantly. The client only searches recursively, so non-recursive
requests are filtered server-side by comparing the parent directory.
Collection stops at 5000 records or 4 MB and the client is told to
stop; on timeout the partial results are returned. Search result
packets are never closed early: the sub-connection stays open until
TOKEN_SEARCH_FILE_FINISH, because the client's search thread holds a
pointer into the file manager object.

Batch reads report a skipped counter and are bounded to 50 ids and a
50 s deadline.

Add tools/mcp_smoke.ps1, a read-only end-to-end smoke test that asserts
auth rejection, the payload limit, annotation coverage, paging fields
and the main read tools. It takes the token from the environment and
never prints it.

Document all of the above in docs/Mcp_Design.md section 10, including
the client-side MAX_PATH stack overflow that a deep search_file call
can trigger, together with the workaround of searching shallow
directories.

Co-Authored-By: deepseek-flash
2026-10-25 13:59:17 +01:00
yuanyuanxianganddeepseek-flash ac5b174b5f Feature: Add offline hosts, batch reads and MCP hardening
Expose hosts the server already knows about. list_all_hosts enumerates
both live contexts and the historical records in the client list, with
authStatus as a three-state string instead of a boolean. search_hosts
now honours online=false instead of returning an empty list, while the
default stays online-only so existing callers see the same results.
get_host_detail falls back to the last known record for an offline host
rather than failing with -32002.

Let read-only tools take an ids array of up to 50 hosts in one call.
The batch path reuses the single-host dispatcher and pages per host, so
behaviour cannot drift; write tools reject ids with -32602 so a mistake
cannot fan out across machines.

Add get_keylog behind its own McpKeylog switch. It drives the client's
existing keylogger sub-connection, accumulates the streamed text for a
bounded window and byte cap, then closes the sub-connection and returns
UTF-8 lines. The client pushes its buffered history first, so a result
contains both history and fresh keystrokes; the tool description says so.

Harden the endpoint. Failed bearer checks are counted per source IP and
ten failures within a minute block the IP for fifteen minutes. Auth
failures and tool calls append to logs\mcp_audit.log with metadata only:
no token, no arguments, no response bodies, and rotation at 5 MB. Loopback
sources are audited but never blocked, because the built-in frp tunnel
makes every remote request arrive from 127.0.0.1 and banning that address
would lock out legitimate clients along with the attacker.

Give list-style tools one pagination contract (limit/offset plus
total/totalAll/hasMore) and fix the generated schemas so id and ids are
genuine alternatives: the stale required:[id] left over from the
single-host schema would otherwise reject ids-only calls.

Co-Authored-By: deepseek-flash
2026-10-25 12:44:45 +01:00
yuanyuanxianganddeepseek-flash c99a1c375e Feature: Add MCP tools for remote chat with the client user
Add chat_open, chat_send, chat_wait and chat_close to the MCP tool set,
behind a new McpChat switch that defaults to off and is independent of
the read-only switch. The tools reuse the existing client chat link: the
main connection sends COMMAND_CHAT, the client opens a sub-connection
with TOKEN_CONN_AUTH and TOKEN_CHAT_START, the server answers with
COMMAND_NEXT_CHAT, and both directions then carry raw CP936 text.

Sessions are per host and held in shared pointers under their own mutex,
so a waiting chat_wait survives a close or a dropped sub-connection, and
chat_send is serialised per session. Text is converted strictly between
UTF-8 and CP936: invalid UTF-8, characters GBK cannot represent (emoji,
accented letters) and messages over the client's 4000-byte buffer are
rejected with -32602 instead of being mangled. A one-second settle delay
after the sub-connection binds keeps the first message from reaching the
client before its chat window exists.

The routing hooks run before the host-management hooks in MessageHandle
and clear the route in OfflineProc before the context leaves the list. A
five-second tombstone absorbs a late TOKEN_CHAT_START after a timeout, so
a failed chat_open does not pop the MFC chat dialog. Idle sessions are
swept on every tool call, and audit entries record the session id and
byte counts only, never message bodies.

The settings dialog gains the chat checkbox and the translated labels
for all three languages, and the strict UTF-8 to CP936 helpers move from
McpMachine.cpp to McpInternal so both tool families can share them.

Co-Authored-By: deepseek-flash
2026-10-23 11:19:21 +02:00
yuanyuanxianganddeepseek-flash 38cd207f5d Feature: Add host management and connection management MCP tools
Expose the online-list TLS column through list_online_hosts, search_hosts
and get_host_detail. The value comes from the flag the client reports at
login, so old clients always read false.

Add list_network_connections and kill_network_connection on top of the
connection manager sub-connection protocol. The kill path matches the
original 110-byte record instead of rebuilding addresses, supports a dry
run, refuses UDP/IPv6 targets, and verifies that the quadruple really
disappeared instead of assuming success.

Add a host_* family backed by the machine manager protocol: ten read
tools covering every tab of the host management dialog, and four
recoverable write tools for process freeze/thaw, window restore/hide/
maximize/minimize, service start/stop/pause/continue/restart, and
scheduled task run/stop. Every write re-reads the snapshot before sending
and re-checks afterwards, reporting -32009 for stale targets rather than
acting blindly. The family is gated by McpMachine, the risky subset by
McpMachineDangerous, and writes additionally require read-only mode to
be off.

Route managed sub-connections from MessageHandle and OfflineProc, keep
the single-in-flight rule by sharing the pending table with a request
kind, and move the shared JSON/lock/encoding helpers into McpInternal so
both tool families use one implementation. Settings dialog, design docs
and en_US/zh_TW/de_DE translations are updated accordingly.

Co-Authored-By: deepseek-flash
2026-10-21 20:01:41 +02:00
yuanyuanxianganddeepseek-v4-pro 9eed43bc8d Feature: Add MCP device management-control tools (kill/window/service/power)
Add P7 management-control tools behind a single McpManage flag (plus
McpReadonly=0): kill_process, operate_window, control_service and
power_action. The write tools run a ready->confirm lifecycle on their
sub-connection, using a new followUp/followUpSent field to tell the two
arrivals of the same TOKEN_*LIST apart; the write command and the follow-up
refresh command go out as two separate Send2Client calls, with a new
WaitSendIdle() (context.h / Server.h) draining the outbound buffer in between
so the same buffer is never WSASend'd concurrently.

McpSettingsDlg gains a "management operations" checkbox (IDC_MCP_MANAGE), the
main toolbar gains an MCP entry button, and en/de/zh-TW strings are synced.
power_action is fire-and-forget over the main connection (no confirmation).

Verified end-to-end against a real Windows 10/VMware client: kill_process
returns remaining:[] and operate_window/control_service return ok:true with
their confirm packet arriving after an HTTP split. Verification surfaced a
prerequisite parser bug, fixed separately in a72e6eb, where HeaderParser
latched m_bShouldUnmask FALSE on HTTP continuation chunks and dropped the
confirm packet.

Co-Authored-By: deepseek-v4-pro
2026-10-01 16:56:30 +02:00
yuanyuanxianganddeepseek-v4-pro 6bcd593b6d Feature: Add upload_file MCP tool (V2 protocol, main-connection upload)
Implement the P2 upload_file tool to push a local file or directory from the
master to an online Windows host over the existing V2 file-transfer protocol.
The server drives FileBatchTransferWorkerV2 synchronously on the main
connection through a headless callback, reuses the list_files chain for the
overwrite pre-check, and is gated by McpFileTransfer=1 plus McpReadonly=0.

The client main connection never initialized the file-transfer module, so
g_status stayed 0 and RecvFileChunkV2 silently dropped every chunk, truncating
uploads to zero bytes. Add a once-per-process lazy InitFileUpload in the
COMMAND_SEND_FILE_V2 handler that mirrors the FileManager init; the destructor
deliberately does not Uninit so g_status remains 1 across reconnects.

Update the design doc to record the client-side change and correct the
upload_file description to state that sha256 is not returned (V2 has no
receiver-to-sender ACK; integrity is checked client-side and logged only).

Co-Authored-By: deepseek-v4-pro
2026-08-31 22:43:16 +02:00
yuanyuanxianganddeepseek-v4-pro 5c77f5ce14 Feature: Add download_file MCP tool (V2 protocol, SHA-256 verified)
download_file pulls a remote file or directory back to the controller over
the existing V2 file-transfer protocol. It reuses COMMAND_LIST_DRIVE to open
the file-manager sub-link, then sends CMD_DOWN_FILES_V2 so the Windows client
streams COMMAND_SEND_FILE_V2 chunks and a per-file COMMAND_FILE_COMPLETE_V2
SHA-256 checksum over its own authenticated sub-connection. The server routes
those two packet types into a new per-device FileTransferSession whenever a
download is pending, so the headless path never opens the GUI progress dialog;
the C2C and existing GUI branches are left untouched.

Files are written under a normalized local_dir, and every chunk filename is
resolved and verified to stay inside local_dir (directories included) to block
.. traversal; overwrite=false skips existing files and counts them as skipped.
One transfer per host (mutually exclusive with the one-shot pending registry),
a dedicated McpFileTransfer=0-by-default gate surfaced in the settings dialog,
and audit logging complete the change. upload_file remains future work.

Co-Authored-By: deepseek-v4-pro
2026-08-30 13:19:51 +02:00
yuanyuanxianganddeepseek-v4-pro 09018e2b4d Improve: Harden MCP screen-ctrl session state machine for injection
Add the busy/closed flags to ScreenCtrlSession plus BeginScreenCtrlAction
/ EndScreenCtrlAction, mirroring the terminal's busy discipline so an
in-flight injection cannot race with session teardown (review finding #6).

While an injection is in flight (busy=true), OnScreenControlClosed marks the
session closed instead of erasing it (the injection thread, which still holds
subCtx, cleans up in EndScreenCtrlAction), SweepIdleScreenCtrl skips it, and
CloseScreenCtrlSession defers the erase. The subCtx is looked up under
m_ScreenCtrlMutex and the injection is sent outside the lock, matching the
established terminal pattern; the screen sub-connection's CONTEXT_OBJECT::Send2Client
already serializes internally via SendLock.

Co-Authored-By: deepseek-v4-pro
2026-08-25 13:04:05 +02:00
yuanyuanxianganddeepseek-v4-pro 6045baadb8 Feature: Add MCP remote_open/remote_close remote control sessions
Add M1 of MCP remote control (docs/Mcp_RemoteControl_Design.md): the
remote_open / remote_close tools plus the ScreenCtrlSession state machine.

remote_open establishes a hidden screen sub-connection by reusing
WebService::StartRemoteDesktop (COMMAND_SCREEN_SPY -> CScreenSpyDlg ->
RegisterScreenContext), polls for the sub-connection plus its physical
resolution (TOKEN_BITMAPINFO -> NotifyResolutionChange -> GetScreenSize),
then records the session (single device, single session, reverse-mapped
subCtx for OfflineProc cleanup) and returns {session_id, screen_w,
screen_h}. remote_close validates session_id and tears down the
sub-connection idempotently. A McpRemoteControl settings checkbox (default
off, requires McpReadonly=0) gates the tools; every open/close is audited
via WM_SHOWERRORMSG.

Gating: multi-monitor hosts are rejected with -32008 (phase 1 supports only
single monitor, where Observe=main screen and Act=virtual desktop coincide);
the monitor count comes from the client heartbeat RES_RESOLUTION ("N:W*H").

Known limitations (deferred to the injection milestones): mutual exclusion
with human remote-desktop viewing is one-directional in M1 (a human who
joins during an MCP session can tear it down on disconnect), and subCtx is
not yet dereferenced so no liveness re-check is needed until
remote_mouse/remote_keyboard.

Co-Authored-By: deepseek-v4-pro
2026-08-25 12:55:52 +02:00
yuanyuanxianganddeepseek-v4-pro 70dbb6b255 Feature: Add persistent remote terminal MCP tools
Add terminal_open / terminal_exec / terminal_close so an AI can hold one
shell session per Windows host and run a sequence of commands with cwd and
environment preserved, instead of the one-shot exec_command.

The persistent terminal is a separate full-command write capability gated by
McpTerminal (default off) plus McpReadonly=0, with no whitelist and full
audit. One device maps to one terminal session via the shared m_TermSessions
map; idle sessions are swept after 300s. terminal_exec rejects commands that
contain & or | (they corrupt the sentinel control-operator chain) as well as
control characters.

Also harden exec_command and terminal_exec against newline/CR injection, fix a
dangling subCtx after an abrupt shell disconnect, and refresh lastActiveAt on
command completion. Add en/zh-TW translations for the new UI strings and a
design document covering both exec_command and the persistent terminal.

Co-Authored-By: deepseek-v4-pro
2026-08-24 19:11:16 +02:00
yuanyuanxianganddeepseek-v4-pro 0ddbc1aced Feature: Add exec_command MCP tool
Add a one-shot exec_command MCP tool that runs a command on a remote
Windows host and returns stdout plus exit code, reusing the Web terminal
link (main-connection COMMAND_SHELL, a shell sub-connection, and a
sentinel command line located via rfind to tolerate ConPTY echo).

The sentinel marker is embedded in the command line ConPTY echoes back,
so it is only treated as hit when it starts a line (preceded by a newline
or the buffer start); this keeps the echoed marker from being mistaken
for the real sentinel when the echo packet arrives before the output.

Execution is gated at Web remote-desktop sensitivity: a read-only mode
(McpReadonly, default on, hides the tool) and a command whitelist
(McpCmdWhitelist) with built-in read-only prefixes. Shell metacharacters
(& | < > ^) are rejected before whitelist matching, and each execution is
recorded in the server audit log.

Extend the MCP settings dialog with the read-only checkbox and a
multi-line whitelist box (commas and newlines both accepted, normalized
to a comma-separated list on save), and add English and Traditional
Chinese mappings for the new UI and audit-log strings.

Co-Authored-By: deepseek-v4-pro
2026-08-23 23:23:20 +02:00
yuanyuanxianganddeepseek-v4-pro 8bd6f3b60a Feature: Add list_registry MCP tool
Add a read-only list_registry MCP tool for querying a remote Windows
host's registry. An empty path returns the five root keys; a path such as
HKEY_LOCAL_MACHINE plus subkeys returns that key's immediate subkeys and
values (name, type, and formatted data).

Client side: enumerate with KEY_READ instead of KEY_ALL_ACCESS and map the
full value-type set (REG_SZ, REG_DWORD, REG_BINARY, REG_EXPAND_SZ,
REG_MULTI_SZ, REG_QWORD, REG_NONE) so unknown types are no longer
mis-reported as REG_SZ. The registry manager now always sends both the
TOKEN_REG_PATH and TOKEN_REG_KEY packets (an empty packet when a part is
empty), making the two-packet reply deterministic for the server.

Server side: add the three-phase flow (COMMAND_REGEDIT, COMMAND_REG_FIND,
then PATH plus KEY) with per-host pending state, parse the fixed-width
wire format with bounds checks, format value data for JSON, and guard
registry paths against exceeding MAX_PATH to protect the client stack.

Co-Authored-By: deepseek-v4-pro
2026-08-23 10:37:55 +02:00
yuanyuanxianganddeepseek-v4-pro 61089e5fae Feature: Add list_files and get_screenshot MCP tools
Add the two P2c MCP tools on top of the P2b protocol. list_files lists
drives (COMMAND_LIST_DRIVE -> TOKEN_DRIVE_LIST) or a directory (follow-up
COMMAND_LIST_FILES -> TOKEN_FILE_LIST on the same one-shot sub-link);
get_screenshot reuses the screen-preview RPC with a per-host reqId
correlation so stale or MFC-preview responses fall through to the MFC
path untouched. Both share the P2b single-flight pending registry.

Fix file/process name encoding: the client reads process names, paths and
file names via the ANSI (A) APIs, so they are GBK on Windows regardless of
the CLIENT_CAP_UTF8 capability bit (which governs window titles only).
Decode by clientType (LNX/MAC = UTF-8, Windows = 936) rather than
GetClientEncoding, and convert the list_files path to the client ANSI code
page before sending. Sync Mcp_Phase2_Design.md with the P2c design and the
encoding correction.

Co-Authored-By: deepseek-v4-pro
2026-08-19 13:27:32 +02:00
yuanyuanxianganddeepseek-v4-pro 6ba6b0289d Feature: Add list_processes, list_windows and get_activity_history MCP tools
Add three read-only P2b MCP tools over the existing protocol. list_processes and list_windows trigger the client via COMMAND_SYSTEM / COMMAND_WSLIST on the main connection and receive TOKEN_PSLIST / TOKEN_WSLIST on a one-shot sub-link; get_activity_history uses the main-connection RPC COMMAND_QUERY_ACTIVITY -> TOKEN_REPORT_ACTIVITY. A per-host single-flight pending registry (m_Pending) with a 20s timeout correlates each response to its request and rejects a concurrent request for the same host with -32003. Parsers stop on the first empty record to ignore the client's LocalSize trailing zero padding, and window titles are decoded per the client UTF-8 capability bit. MessageHandle only adds if-guarded branches, so the MFC dialogs are untouched. Sync Mcp_Phase2_Design.md with the mode A'/A architecture, the verification notes, and the registry-backed config location.

Co-Authored-By: deepseek-v4-pro
2026-08-19 09:58:58 +02:00
yuanyuanxianganddeepseek-v4-pro 13052b7cae Feature: Add MCP (Model Context Protocol) server integration
Add an optional MCP server (JSON-RPC 2.0 over Streamable HTTP) exposing
an online-host listing tool, protected by a Bearer token. Disabled by
default; configured via a new "Extensions > MCP Settings" dialog.

- McpServer: httplib + JSON-RPC 2.0 dispatch (initialize/ping/tools/list/tools/call)
- McpSettingsDlg: runtime-created dialog for enable/port/bind/token
- HostJson: extract single-host JSON serialization shared with WebService
- FRP: expose MCP port (union with listening/Web ports) when bound to 0.0.0.0
- i18n: en_US / zh_TW translations

Co-Authored-By: deepseek-v4-pro
2026-08-16 14:37:11 +02:00