Commit Graph
139 Commits
Author SHA1 Message Date
yuanyuanxiang 1e336113a5 Feature: trial code can replace an existing licence, plus two UI refinements
三处独立的小改动,都在服务端 UI 层。

1) 试用软件:已有授权码时不再直接拒绝

原来 OnMasterTrail 一发现 settings\Password 非空就弹一句提示然后 return,用户
没有任何办法切回试用模式。现在把提示改成询问「是否更新试用口令?」,选「是」
继续走原有流程(合规声明 → 写 master/BindType/Password/PwdHmac/SN),原有授权
码被覆盖;选「否」保持原授权不变,与改动前行为一致。

2) 语言对话框显示语言包目录

语言选择框下面加一行只读信息:标签 + 可选中复制的只读编辑框。目录存在时显示
GetFullPathName 解析后的绝对路径(配置默认值是相对路径 ./lang,直接显示看不出
实际位置);未设置或目录不存在时显示「内置/预设」,此时只有内嵌的 en_US /
zh_TW 可用。

对话框是 DLGTEMPLATE 手工拼的动态模板,.rc 里没有对应资源:高度 75→92、
cdit 4→6、OK/Cancel 下移到 y=67。标签 cx 取 120 而非 55,否则英文
"Language pack folder:"(约 70 DLU)和德语 "Sprachpaketordner:" 会被裁掉;
编辑框带 WS_BORDER,手工拼的控件没有资源编辑器那种默认边框。

3) 远程交谈:没选中主机时不弹确认框

OnChat 原来无条件弹「确定开始远程交谈吗?」,但没选主机时 SendSelectedCommand
的目标列表为空,确认了也发不出去。改为先判断再弹。用
GetFirstSelectedItemPosition 而不是 ResolveCommandTargets:后者要读
m_ClientIndex / m_HostList,网络线程会并发修改,UI 线程裸调不安全,而
SendSelectedCommand 内部本来就持 m_cs 调过一次;这个 API 就是
ResolveCommandTargets 里的同一个判定。m_CtxMenuTargets 判断保留——右键菜单
派发期间目标存在那个快照里,列表选中项可能为空。

三份语言文件各补 3 条译文(含第 1 条的询问文案)。德语沿用 ASCII 化写法
(fuer / ueberschrieben),因为 GBK 存不下变音字母。

已在 Debug 版实测:语言对话框两个分支(路径 / 内置预设)截图确认无裁剪、按钮
在框内;远程交谈未选主机时 PostMessage ID_TALK_MANAGE 后不产生任何窗口。
2026-11-03 17:48:17 +01:00
yuanyuanxiang 356aa27108 Feature: Reject MCP tool calls the target client cannot handle
tools/list 不带参数,无法按目标设备过滤工具列表。60 个工具里有 33 个只在
Windows 客户端上有实现,模型无从得知,只能下发命令后白等超时。

DispatchSingleHostTool 开头按 kToolPlatforms 表核对目标主机平台,不匹配立刻
返回 -32005;批量路径经由同一函数自动覆盖。主机不存在或离线时放行,把 -32002
留给工具自己报,避免同一个问题出现两种错误码。

支持面是刻意设计的阶梯:win 60/60、lnx 27、mac 16、apk 10。60 个工具全部含
win,所以 Windows 客户端永远不会被这道门禁拒绝,行为与改动前完全一致。

平台表按服务端实际放行来标,不按客户端能力标。两处会分叉的地方:

- exec_command / terminal_* / kill_process:macOS 客户端有实现(main.mm:753 的
  ShellworkingThread、SystemManager 的 KILLPROCESS),但服务端刻意拦着
  (McpServer.cpp:3652「macOS 本轮不开放」、6870),故标 win+lnx。
- list_windows:Linux/macOS 的 SystemManager 都有 COMMAND_WSLIST 分支,但
  BuildListWindows 把命令发在主连接上,而这两个平台的主循环只处理 COMMAND_SYSTEM
  (起子连接),WSLIST 只在子连接里才被处理,走不到。实测 Linux 上直接超时
  -32001。那两个 case 是给 SystemDlg 用的,故标 win。

copy_files_c2c 是唯一的非对称工具(源端必须 Windows,目标端可 win/lnx/mac,
反向不支持),用 roles 按参数名分别声明,C++ 侧 CollectTargetReqs 对应处理。

配套 mcp/tools.json(60 个工具,version 2)与 tools/mcp_tools/ 下的抓取、生成、
比对、校验脚本。check_platform_table.py 校验 C++ 表、tools.json、instructions
三方一致,并把「Windows 全量」做成不变式。

已在 A6(Windows 11)与 Ubuntu24(Linux)上实测:Windows 侧 14/14 通过且无误拒,
Linux 侧 11 项拒绝全部命中门禁,copy_files_c2c win->lnx 成功、lnx->win 被拒。

开关 McpPlatformGuard(默认 1),关闭只失去提前拦截,不影响任何执行路径。
2026-11-03 16:06:41 +01:00
yuanyuanxianganddeepseek-flash c66f410831 Feature: Embed the server TLS certificate in delivered DLLs
Add a "高级 → DLL内嵌TLS证书" toggle (off by default, persisted as
[settings] EmbedTlsInDll). When it is on, ReadKernelDll patches the server's
current TLS anchor into the ServerDll and ShellCode payloads, so clients that
come online through the loaders start their own session over TLS without
waiting for an online push. The plaintext DLL loader in client/main.c is
untouched; only the DLL's fresh connection is protected. The write happens
after SetServer and before CalcMD5FromBytes, and the anchor records the host
part of the master address rather than "ip:port" because the client matches
the anchor against its configured address set. TinyRun has no anchor block and
keeps working as before.

Toggling the switch, and confirming the certificate dialog, rebuild the six
payloads in place, so no server restart is needed after a certificate change.
The payload pointers are replaced as a whole, and the network threads that read
them (SendServerDll and TOKEN_GETVERSION) now take a dedicated critical section
for the full duration of use.

COMMAND_UPDATE no longer clears the tls_disabled marker on the client. Now that
any delivered DLL may carry the anchor, "the payload has an anchor" no longer
means the operator opted this host into TLS, and clearing the marker would
silently flip a host that was explicitly set to plaintext onto TLS against a
plaintext path. Re-enabling TLS stays an explicit action through
COMMAND_TLS_ENABLE and COMMAND_SET_PROTO, which still clear the marker.

Menu and notice strings were added to en_US, zh_TW and de_DE, and the embedded
TLS design document records the new switch and the revised update semantics.

The new menu entry also takes a feature-limits slot so a subordinate master
can hide it like every other 高级 item (see 8807321):
HIDE_MENU_EMBED_TLS_ANCHOR in UIBranding.h, MF_EMBED_TLS_ANCHOR at bit 57
in FeatureFlags.h (the first free one after MF_FILE_SPEED), a row in the
主菜单 tab of CFeatureLimitsDlg, and the matching DeleteMenu on the 高级
menu. The entry still has no bitmap of its own, so it renders without an
icon next to its three siblings.

Co-Authored-By: deepseek-flash
2026-11-02 18:30:37 +01:00
yuanyuanxiang 454d25d37f fix(share): carry the transport in the share and assign payloads
The share payload was host:port:shine and carried no transport at all, so a
shared client fell back to its baked-in protoType. Share instances also skip
ApplyProtoSwitch (ClientDll.cpp:810), so a client upgraded to WSS was shared
to a TLS front end as raw TCP and looped on HTTP/1.1 400.

Extend both payloads with an optional trailing transport field:

    share  : host:port:shine[:transport]
    assign : host:port:days:shine[:transport]

The field is omitted when the source protocol is not TCP/WS/WSS, so HTTP/UDP/
KCP hosts keep their previous behaviour instead of being silently downgraded
to plain TCP.

- server: add SelectedShareTransport(), share it between OnOnlineShare and
  OnOnlineAssignTo, and accept a tcp:// ws:// wss:// prefix in the address.
- client: parse the field on both paths and persist the assigned value to
  settings/master_transport, clearing it when the field is absent.
- share_list: dedup on host:port instead of the whole record, so re-sharing
  a host with a different transport replaces the stale entry.
- assign: guard bToken[_MAX_PATH] against the longer payload.
- lang: translate the reworded prompt and the three new messages in en_US,
  zh_TW and de_DE.

Transport is pinned at share time and does not follow a later protocol switch
on the master link; the m_bShared gate stays as-is on purpose.
2026-11-02 14:01:39 +01:00
yuanyuanxianganddeepseek-flash 951b4072e5 Feature: Embed the master's TLS certificate in generated clients
When the server has TLS enabled, the builder can now bake its certificate into
the client it produces, so a distributed client speaks TLS on its very first
connection instead of waiting for the anchor to be pushed after a plaintext
login. The dialog gets a checkbox (IDC_CHECK_TLS_ANCHOR) that is only enabled
for payloads and protocols where an embedded anchor makes sense; the choice is
remembered even when the control flips to disabled and back, so switching
protocols cannot silently undo a deliberate opt-out. Every label variant stays
short enough to fit the 196 DLU field, including the German ones. A template
that predates the anchor block no longer aborts generation: it warns, clears
the checkbox and produces a plain client, so a master upgraded without
rebuilding the ghost/ServerDll resources does not block every build.

The certificate lands in a fixed 4 KiB block (magic, version, length, FNV-1a
hash, master address, PEM) carved out of the payload at build time. The client
reads its trust anchor from four sources in order: the tls_disabled marker,
the certificate the server pushed into the registry, a PEM file next to the
executable, and finally the embedded block.

The embedded block only applies to a connection whose target matches the
master recorded at generation time, compared as an address set: an exact
string match when only one address is configured, or an intersection of
resolved IPv4 addresses otherwise. A transferred, shared or parallel instance
falls back to the old plaintext first-connect path instead of pinning itself
to a certificate it can never verify. That decision is made per connection,
not per process: shared and parallel instances are threads inside a single
client process, so a process-wide flag let whichever instance connected first
decide for all of them, and the first load of the TLS state cached that answer
for good. The TLS layer now keeps two cached states (embedded anchor allowed,
and not allowed), picks one per handshake, and reports the anchor source of
that handshake for the login capability bit. Matching by resolved address also
keeps parallel mode working, where the connection goes to the single IP the
domain pool selected while the configured master is a domain or a list.

Server side, generated and updated payloads get the block written in place;
the client reports the capability bit on login so the console can tell which
hosts are already TLS-only on first connect. Loading the anchor decodes every
PEM block in the chain rather than just the leaf, and an anchor that exists
but fails to load keeps the old fail-closed behaviour. A pushed anchor only
reconnects when the transport of the live connection actually changes, judged
against that connection's own target rather than the process-wide switch.

This was verified end to end against a freshly generated client with an empty
registry: the first connection was a TLS 1.2 ClientHello 0.2 s after start,
and a four-certificate fullchain loaded all four blocks. Re-verified after the
per-connection rework with the anchor block patched into a debug client: with
a matching master the first bytes are a ClientHello, with a foreign master the
client logs the skip and sends plaintext, and a domain master resolves to the
IP it connects to and still matches. A master domain that no longer resolves
falls back to plaintext within a second and is not looked up again for a
minute, instead of stalling every reconnect on a DNS timeout while holding the
lock the certificate verification needs.

Co-Authored-By: deepseek-flash
2026-11-01 20:40:02 +01:00
yuanyuanxianganddeepseek-flash c4021e1fc9 Feature: Ship a built-in TLS certificate so encryption works out of the box
A fresh install used to require openssl before the server could speak TLS:
two empty paths in [tls] meant the identity failed to load and every
ClientHello was refused. TLS is now on by default and, when no custom
certificate is configured, the server generates its own self-signed one the
first time it needs it -- RSA-2048, SHA-256, CN=yama-server, CA:TRUE, valid
for ten years from one day before now. Plaintext clients are untouched, since
the device port still splits plaintext from TLS by sniffing the first six
bytes of a connection.

The certificate and its PKCS#8 private key are stored side by side in the
config under [tls] BuiltinCert / BuiltinKey as single-line base64 DER. Single
line, because the server has two config backends -- the registry for Release,
settings.ini for a Debug master -- and only a line without newlines means the
same read/write code serves both. That in turn required fixing the registry
reader: iniFile::GetStr copied into a 512 byte stack buffer, so a 1.5 KB value
came back as a truncated or empty string. The two-phase dynamic read now lives
in common/iniFile.h as ReadRegistryValueSz / ReadRegistrySz, and the copy that
client/TlsChannel.cpp had been carrying for its own trust anchor is gone. This
also makes the built-in certificate self-checking: Ensure() re-reads what it
just wrote and fails loudly if the round trip did not survive.

Import has to go through NCRYPT_PKCS8_PRIVATE_KEY_BLOB, matching the import
path in BuildIdentityFromDer. NCRYPT_PKCS8_PRIV_KEY_INFO_BLOB, which most
samples reach for, is not implemented by the Microsoft Software KSP and
returns NTE_INVALID_PARAMETER; a probe confirmed it, and the export type that
works is the one the importer already expected. Building an identity is now
split into a file front-end (PEM, fullchain, PKCS#1 hints) and a shared DER
core, so the built-in and file paths cannot drift apart.

That key also exposed a second problem worth fixing here. The identity binds
its private key to the certificate by name -- CRYPT_KEY_PROV_INFO with
pwszContainerName -- and Schannel resolves that name on every handshake
through CryptAcquireCertificatePrivateKey. With the fixed name
"YamaServerTlsKey", two server processes under the same Windows user shared
one key slot: whichever loaded last overwrote it, and the other process's next
handshake picked up a private key that does not match its certificate. That is
exactly the debug-plus-release pairing used here, and defaulting to a built-in
certificate is what makes it reachable, since the debug instance no longer
points at the same PEM as the release instance. The name is now the base name
plus the first six bytes of the certificate's SHA-1 thumbprint, e.g.
YamaServerTlsKey-c0d469eae8a4: different certificates get different keys,
instances sharing one certificate still share one key. MCP picks this up too.
The effective name goes to the trace log so a collision is visible without a
debugger. A stale key from an older build may still sit in the key store under
the old name; nothing references it and it is not deleted automatically, since
a running instance of an older build could be using it.

The trust anchor still has to be pushed. The client pins exactly one root
through an exclusive-root chain engine and checks no host name, so a
self-signed CA:TRUE leaf chains cleanly to itself -- but only if the client is
told about it. That is the existing 启用 TLS / 切换到 WSS command, which now
takes the PEM from ServerTlsIdentity::AnchorPem instead of re-reading the
configured cert file, so it reports the same certificate the server actually
serves for both sources. Losing the stored certificate (cleared registry, new
Windows user) regenerates it, and every client must be re-pushed the anchor.

Two places that used to fall back to [tls] CertPath now skip that fallback
while the built-in certificate is active: the MCP HTTPS front end at startup
and the prefill in its settings dialog. A self-signed certificate cannot pass
validation at a public MCP client, and the retained CertPath is only a
leftover from switching back to a custom certificate, so pretending to use it
would fail later with a worse message. MCP HTTPS with empty paths already
fails closed with a log line.

The TLS dialog gains a 内置证书 checkbox, ticked by default and unticked when
certificate paths are present; ticking it greys out the path rows without
clearing them, and shows either "generated on first use" or the expiry date
read back from the stored certificate. Saving writes four keys -- Enabled,
UseBuiltIn, CertPath, KeyPath -- and an explicit UseBuiltIn keeps the paths
from being used as an implicit switch. Every reader of [tls] Enabled now
defaults to 1, so the menu check, the dialog and the loader agree on a fresh
install. The status bar panes on 无 / 有 grew a third state, 内置, and the
pane width is measured across all three.

Translations were added to en_US, zh_TW and de_DE; skipping the German file
would have left the new dialog text in Chinese there, as de_DE is loaded from
disk rather than embedded.

Verified with the debug server against openssl s_client. Both the generated
built-in certificate (CN=yama-server) and an existing custom one
(CN=localhost) complete a TLS 1.2 handshake with the pinned certificate, and
their log lines show distinct key names, c0d469eae8a4 and 272f2adfb19c. An
unmodified client still runs in plaintext without an anchor, an existing custom
certificate deployment behaves exactly as before, and client and server both
build clean at Debug x64.

Co-Authored-By: deepseek-flash
2026-11-01 15:39:54 +01:00
yuanyuanxianganddeepseek-flash 8807321f1d Feature: Bring feature limits in line with the current menus
The "feature limits" dialog offered by 主控生成 had drifted well behind the
UI: a whole 高级 menu, five toolbar buttons and a couple of dozen context
menu entries could not be restricted at all, and several items were listed
under names that no longer appear anywhere.

The three tabs now follow the real resources. Menu items are listed in the
order of IDR_MENU_MAIN and carry the same text minus accelerators; the
toolbar covers all 19 IDR_TOOLBAR_MAIN buttons; the context menu lists the
nested 实验功能 / 客户管理 / 远程控制 / 机器管理 / 客户代理 / 执行程序 entries
individually and the two runtime-built ones (协议切换, 执行代码) as groups.
That makes 57 / 19 / 46 items, each with its own bit; new bits were added
at the end of each field so the existing positions stay put.

Enforcement was extended to match, and while wiring it up one long-standing
bug surfaced: DeleteMenu(MF_BYCOMMAND) only reaches items of the menu it is
called on, so hiding an entry of a nested popup had always been a no-op.
Nested items are now deleted through their own submenu handle, and a popup
whose items are all hidden is removed together with its parent entry, so
no empty popup is left behind. 协议切换 is inserted relative to where
实验功能 ended up, which keeps it next to it either way; 执行代码 is simply
skipped when restricted.

The missing labels were added to en_US, zh_TW and de_DE.

Co-Authored-By: deepseek-flash
2026-11-01 12:48:44 +01:00
yuanyuanxianganddeepseek-flash 559681ea01 Feature: Show TLS and MCP state in the server status bar
The main window's status bar now carries two short panes between the host
count and the FRP address. The first reports whether the server identity is
loaded, using the same ServerTlsIdentity::IsReady() check the rest of the UI
uses, so a menu that claims TLS is on cannot leave the bar saying otherwise
when the certificate failed to load. The second reports whether MCP is
enabled and, while it is, which protocol the endpoint speaks: (HTTP) or
(HTTPS) according to McpHttps. Both panes follow the existing 60 second
statistics tick, and toggling either switch in its dialog refreshes them at
once instead of leaving the bar stale until the next tick.

Pane widths are measured from the widest text each pane can show in the
current language instead of hardcoded pixels, and the measurement selects
the status bar's own font: DEFAULT_GUI_FONT is about 8% narrower than the
Segoe UI the bar paints with, which would have clipped "MCP: ... (HTTPS)"
at higher display scaling. Switching HTTP/HTTPS keeps the column width
steady, and turning MCP off lets it shrink again.

The MCP settings dialog was also missing translations for several of its
labels, the file write switch among them, which is why they stayed Chinese
in the English UI. Those keys, together with the status bar ones, are added
to all three language files.

Co-Authored-By: deepseek-flash
2026-11-01 10:53:04 +01:00
yuanyuanxianganddeepseek-flash cbb84809d8 fix(server): bind context-menu commands to the hosts the menu was opened for
The host list is a virtual list (LVS_OWNERDATA), so its selection is stored as
row indices. m_HostList is reordered underneath those indices: ApplySort() sorts
it in place on every TIMER_REFRESH_LIST tick, and RemoveFromHostList() erases
entries as hosts go offline. TrackPopupMenu runs its own modal loop, which keeps
dispatching WM_TIMER, so by the time the user clicks an item the row numbers
have already shifted. Every command handler resolves its targets at click time
with GetFirstSelectedItemPosition() + GetContextByListIndex(), a pure row lookup
(m_HostList[m_FilteredIndices[row]]), so a menu opened for host A could act on
whichever host now occupied that row.

Snapshot the selected clientIDs before the popup and restore the selection to
their current rows when it returns, dispatching the command ourselves through
TPM_RETURNCMD so the restore happens first. CMenu::TrackPopupMenu is not used
for this because its return type is BOOL, which would truncate the command ID.

Restoring the selection alone is not enough. A dozen handlers pop a confirmation
or input dialog before resolving their targets, and that modal pumps WM_TIMER
too, so the selection drifts a second time. Keep the same clientID snapshot in
m_CtxMenuTargets for the duration of the dispatch and let ResolveCommandTargets()
prefer it over re-reading the selection. Every lookup revalidates GetClientID()
against the row it landed on, so a stale index skips the host instead of acting
on a different one, and hosts that went offline while the menu was open are
dropped rather than guessed at. The snapshot is saved and restored around the
dispatch so a nested popup cannot clobber the outer one.

SendSelectedCommand, ShouldRemoteControl, SwitchSelectedProtocol, OnOnlineDelete,
OnOnlineUninstall, OnOnlineHostnote, OnOnlineRunAsAdmin, MachineManage and
ProxyClientTcpPort now resolve through it. Handlers that show no dialog before
resolving (OnMainProxy, OnOnlineAddWatch, OnOnlineInjNotepad, OnOnlineLoginNotify,
OnOnlineActiveWnd) keep reading the selection directly.

Co-Authored-By: deepseek-flash
2026-10-30 23:07:48 +01:00
yuanyuanxianganddeepseek-flash 50a489e316 Fix: Close the gaps the WebSocket transport review found
Three of the findings only bite in deployment. First, the client's TLS and
WebSocket handshakes run synchronously on the reconnect thread with no socket
timeout, so a peer that accepts TCP and then goes quiet (black-holed proxy
upstream, middlebox that only receives) blocks recv() forever and stalls the
reconnect loop until the process is restarted. Set a 15 s SO_RCVTIMEO and
SO_SNDTIMEO for the handshake window - the same value both server handshake
threads use - and clear them once the connection is up so the worker thread's
select plus blocking recv keeps working as before.

Second, per-IP rate limiting counted the getpeername address before the real
device was known. Behind a same-host reverse proxy that address is loopback,
which IPWhitelist always trusts, so WS traffic was neither counted nor banned;
behind a remote proxy every device shares one bucket, and tripping the
threshold disconnected all of them. Count and ban by the forwarded device IP
once the upgrade resolves it, mirroring the Go server's limitDirectPeer and
handleConnection split. Direct connections keep their accept-time count and
are not counted twice.

Third, the protocol switch disarmed its five-minute auto-revert as soon as the
new entry connected, which only proves TCP/TLS/WS handshaking finished. If
login is never accepted there (wrong backend, reverse proxy pointing at some
other WS service), the revert could never fire and the client would keep
retrying a dead entry. Disarm on the first CMD_MASTERSETTING instead, which
the server only sends after adding the host to its online list, and re-check
it on every heartbeat so a late one still counts.

The smaller items came along: free the handshake parameter when CreateThread
fails in both handshake starters, move the WS_Handshaking fail-closed guard
ahead of the TLS branch so it also covers WSS (where tlsState is already
TLS_Ready), generate the frame mask from a per-channel PRNG inside the send
lock instead of an unseeded global rand(), make the transport flags and the WS
session's ready flag atomic, drop rather than send unframed application bytes
when a WS session has closed, and abort a protocol switch whose PEM fails to
load instead of moving to an entry that cannot connect.

The Go server now bounds the upgrade sniff even when ReadTimeout is zero, and
the design doc records the two-stage limiter, the login-based disarm and the
review items that stay as known limits.

The protocol switch's input prompt is cut down to "reverse-proxy entry
(host:port)" - the label static is only 81 dialog units wide, and the old
sentence ran to roughly three times that.

The three language files follow: en_US and zh_TW gain the shortened prompt and drop
the long key it replaced, the German file gains the protocol-switch block it never
had, and its WebSocket tip key is corrected - it had picked up a Go-server clause
the source string never carried, so the tip was never translated at all.

Co-Authored-By: deepseek-flash
2026-10-30 18:11:34 +01:00
yuanyuanxiang 99db28e2e2 Feature: Let the operator switch a live client's transport from the online list 2026-10-30 17:22:36 +01:00
yuanyuanxiang d4f312c9d8 Feature: Tunnel the device protocol through a reverse proxy over WebSocket 2026-10-30 17:21:42 +01:00
yuanyuanxianganddeepseek-flash 1d875ddbd1 Feature: Add a "Copy Name" item to the online host context menu
The online list already lets an operator copy everything about a host
through "Copy Client Info", but there was no quick way to grab just the
names, which is what people actually paste into a chat or a ticket. The
new menu item sits directly below "Edit Group" and copies the names of
all selected hosts to the clipboard, separated by semicolons.

"Name" means what the first column of the list shows: the remark when one
has been set, otherwise the computer name. The column text is CP_ACP, so
the handler decodes it the same way OnGetdispinfo does; that keeps the
copied text identical to what is on screen, including for Chinese remarks.
Clipboard writing reuses the existing UTF-8 based SetClipboardText helper
instead of growing a third copy of the same CF_UNICODETEXT code.

The item also gets its own 16x16 icon (two stacked cards with text bars,
drawn on the usual 240,240,240 background) loaded into a newly added
m_bmOnline[75] slot, and translations were added for English, German and
Traditional Chinese so the item does not fall back to simplified Chinese
when another UI language is active. The user manual and the resource
README were updated to match.

Co-Authored-By: deepseek-flash
2026-10-29 22:06:33 +01:00
yuanyuanxianganddeepseek-flash dc4fd792f6 Feature: Implement the Linux screen preview response
The Linux client now answers COMMAND_SCREEN_PREVIEW_REQ, so a host with
an X11 desktop gets a thumbnail when it is double-clicked in the online
list, a frame in the list's Preview column, and an image from the MCP
get_screenshot tool. Previously only Windows clients advertised the
capability and Linux hosts showed "预览不可用" after a four second wait.

The client does not encode JPEG. Stock desktops ship libjpeg.so.8 whose
struct layout is the distribution's ABI (JPEG_LIB_VERSION 80), while the
in-tree jpeglib.h is libjpeg-turbo 3.1.1 (62), and libturbojpeg is not
installed by default; dlopening the system library against that header
fails with "Wrong JPEG library version: library is 80, caller expects
62". Instead the client sends raw pixels in a new screen preview format,
SCREEN_PREVIEW_FMT_BGRX: top-down rows of B,G,R,X with no row padding,
already scaled to the requested width. The server re-encodes to JPEG at
the single ingress point, so the preview popup, the list thumbnail cache
and the MCP tool keep consuming JPEG only.

Capture follows the path ScreenHandler already uses: root window copied
into an offscreen pixmap with an IncludeInferiors GC, then XGetImage,
which avoids BadMatch under compositing window managers. The X11 type
declarations and the dlopen loader moved out of ScreenHandler.h into
linux/X11Loader.h so both users share one dlsym table. The full-size
image is never materialized: a box filter reads straight from the
XImage rows (honouring bytes_per_line) into the output buffer, scales to
maxWidth without upscaling, and clamps the height to 1080 so a portrait
4K desktop cannot produce a 26 MB packet. Rows and columns come out
even, which they are for JPEG anyway.

The capability bit is now honest about the runtime. LOGIN_INFOR grows
DefaultCaps()/SetCaps(), and the client recomputes the bits before every
login and re-login: CLIENT_CAP_SCREEN_PREVIEW is set only when DISPLAY is
present and the X server actually opens. A headless host therefore gets
-32005 "Host does not support screen preview" from MCP instead of a
timeout, and a host whose session appears after boot picks it up on the
next reconnect. Requests are handled on a detached worker thread behind
a single-flight guard (matching the Windows client), so a slow XGetImage
never stalls the receive thread and a burst of requests degrades to "no
preview" rather than queueing. If the worker thread cannot be created,
the guard is released again, so one failure cannot leave every later
request rejected as busy until the client restarts.

The MCP design note claimed the capability was declared by Windows only,
and the get_screenshot tool description said the same; both now say what
the code does (Windows always, Linux when a display is reachable).

Server side, NormalizeScreenPreviewPacket runs in MessageHandle before
the MCP handoff and the PostMessage to the UI thread. It validates that
width/height are within the values the server itself can ask for and
that bytes equals width*height*4, converts with a stack Gdiplus::Bitmap
over the packet's own pixels (no copy, and no DEBUG_NEW trouble), and
rewrites the header to JPEG. The encoder output is read back by seeking
the stream rather than GlobalSize, so the packet carries no heap-block
padding after the EOI marker. Malformed packets are dropped; failure
statuses pass through untouched so the existing code can report them.

Tested against a Debug server with the WSL Ubuntu 24.04 build as the
client. get_screenshot returned valid JPEGs at max_width 480 (480x142,
1.7 KB) and 1920 (1920x570, 17.9 KB), repeatably; the list showed a
thumbnail for the GUI client and N/A for a second copy started without
DISPLAY, which also answered -32005. The box filter and the BGRX to JPEG
conversion were checked separately with quadrant fixtures: the browser
over the synthetic B,G,R,X buffer recovers red/green/blue/white in the
right channels and the downscale averages, handles non-integer ratios
and row padding, and rejects 24bpp and upscaling. The captured frames
come out black under WSLg because Xwayland keeps no root pixmap there;
that is the compositor, not this code, and Xorg sessions capture
normally.

Co-Authored-By: deepseek-flash
2026-10-29 18:12:15 +01:00
yuanyuanxianganddeepseek-flash 45e1dd9f6c Feature: Implement the proxy mapping listener without HP-Socket
The proxy mapping dialog ("代理映射") depended on HP-Socket: three vendored
SDK headers (4787 lines) plus #pragma comment(lib) lines pulling in four
prebuilt lib/DLL variants, all guarded by ENABLE_HPSOCKET, which has been 0
since the initial commit -- so the feature was dead code that only answered
"This feature is unavailable due to HPSocket disabled" and no build of this
repository ever ran it.

Replace that dependency with a small listener built on blocking sockets and
select, which is the same approach the client's CProxyManager and the
server's own SimpleWebSocket already take. The accept loop polls every
200 ms so Shutdown can return without closing a socket another thread is
selecting on, and each accepted connection gets a relay thread that only
has to recv and hand bytes to the dialog. Connection sockets are closed by
their relay thread alone; Disconnect only raises a stop flag and calls
shutdown() under the same lock the relay thread takes before closesocket,
so a recycled handle is never shut down by mistake. Finished threads are
parked in a graveyard and joined by the accept thread, which keeps the
thread handle count flat across open/close cycles.

ProxyMapDlg keeps the SOCKS5 state machine it had, but now stores its
per-connection state in a map keyed by the connection id instead of
relying on HP-Socket's GetConnectionExtra, and it logs through a posted
window message rather than touching CEdit from worker threads. The two log
panes in IDD_PROXY are ES_READONLY, so EM_REPLACESEL was silently ignored
(the original code had the same latent bug); the dialog now keeps the pane
text itself and writes it with SetWindowText, bounded to 256 KB per pane.

The vcxproj and filters lose the three SDK headers, and the dialog gate in
OnOpenProxyDialog loses its ENABLE_HPSOCKET check.

Tested against a Debug server with a Debug Windows client on the same
host: curl through the listener succeeds over both the IPv4 and the
hostname ATYP paths, a 4 MB transfer arrives byte-identical, a refused
target maps to SOCKS5 reply 5, killing the client mid-transfer closes the
dialog and releases the port, and five open/close cycles leave the server's
handle and thread counts unchanged.

Co-Authored-By: deepseek-flash
2026-10-29 15:37:16 +01:00
yuanyuanxianganddeepseek-flash 27b5431130 Feature: Add the file-write tools behind their own switch
P10-B adds delete_path, move_path and create_folder, and the switch they
need. Reusing McpFileTransfer would have been wrong: uploading overwrites a
file, deleting destroys a tree, and an operator who wants one may well not
want the other. McpFileWrite is therefore a separate key, off by default,
wired the way every other switch is - read from settings.ini at startup,
reported as get_server_status.switches.file_write, and exposed with its own
checkbox in the MCP settings dialog. The tools additionally require readonly
to be off: a read-only server has no business modifying a host.

No client change was needed: COMMAND_DELETE_FILE, COMMAND_DELETE_DIRECTORY,
COMMAND_CREATE_FOLDER and COMMAND_RENAME_FILE already existed in the Windows
file manager. The chain reuses the file-manager sub-connection and adds a
phase - the main connection asks for the drive list, the sub-connection's
first packet hands it to OnDriveList which sends the write command, and the
client's TOKEN_*_FINISH ack moves the pending request from phase 0 to 1,
where the tool sends COMMAND_LIST_FILES for the parent so the ack and the
confirmation share one timeout. Only the IO thread touches the
sub-connection; the tool thread just waits on the shared condvar, which keeps
the sub-connection's lifetime out of its reach.

The confirmation exists because the client answers unconditionally: it
ignores the return values of DeleteFile, MoveFile and
MakeSureDirectoryPathExists and there is no error token. ok therefore only
means "the command arrived", and verified is the real answer - true when the
parent listing shows the expected post-state, false when it shows the
opposite, null when the listing itself did not come back (timeout or
disconnect), since reporting that as false would be a lie. Linux, macOS and
Android hosts are refused outright: those clients decode these paths as GBK
while the server speaks UTF-8 to them for list_files, so a non-ASCII path
would corrupt rather than fail. Paths are validated as UTF-8, converted to
GBK exactly once, and reject %VAR%, relative paths, drive and share roots,
and - for delete_path and for move_path's source - the Windows, Program
Files, ProgramData, $Recycle.Bin and System Volume Information trees.
create_folder gets no system-directory ban, because writing there is the same
permission upload_file already has.

Two defects surfaced while exercising this against a real client:
create_folder's wire path has to end with a backslash, because
MakeSureDirectoryPathExists treats a non-terminated last component as a file
name and only creates the intermediate levels; and
ResolveFileOpVerified(LookupInListing(...), isDir, ...) read isDir before the
lookup ever set it - argument evaluation order is unspecified and MSVC
evaluates right to left - so every create_folder reported verified=false even
when the directory existed.

Verified on a Debug x64 build against a Windows client over MCP: nested
create_folder, upload, rename, delete, delete a tree, the failure shapes
(delete with recursive=false on a directory, create_folder onto an existing
file name, delete of a non-existent target) and every refusal (drive root,
C:\Windows\Temp, C:\Users, %TEMP%, relative, empty, over-long, from==to,
offline host, non-numeric id), with a Chinese-named directory created,
renamed and deleted end to end; no file-manager window appeared in the server
process during any of it. The smoke test gained section [4c], opt-in through
-FileWriteDir, which asserts verified and never ok and walks a sandbox
through the same path; two runs passed 69 checks with the sandbox removed
afterwards. Bin/settings.ini was restored byte-exact and the Release
instance was left alone.

Co-Authored-By: deepseek-flash
2026-10-28 21:25:46 +01:00
6bfa4294cc Feature: Switch a Linux client's transport TLS at runtime
The server's TLS menu already wrote the trust anchor into the Windows
client's registry and expected a restart. The Linux client grew the same
command handling (166/167) but, like Windows, only read the anchor once at
startup, so enabling or disabling TLS still meant restarting it. Both
handlers now take effect immediately.

TlsChannelLinux.cpp no longer initialises through std::call_once. The
process-level state (context, enabled, load error) lives behind a mutex and
TlsReload() rebuilds it from whatever anchor file is on disk, so
TlsEnabled() reflects the new transport as soon as the anchor is written or
removed. In-flight sessions survive the swap because SSL_new increments the
SSL_CTX reference count; the unit test pins that down by keeping an
established TLS connection open across a reload that frees the old context.
A reload that hits a bad anchor keeps the previous state and only logs: one
bad push should not brick a working client, and the next start is still
fail-closed. The pushed PEM is parsed before it is written for the same
reason -- a corrupt anchor on disk would lock the client out of the server
with no way to correct it remotely.

Only a real transport flip (plaintext <-> TLS) asks for a reconnect. An
anchor swap alone, as in a certificate rotation, leaves the current session
alone and applies to the next connection. The receive thread never closes
the socket itself; it sets g_needReconnect and the main heartbeat loop
disconnects so the outer reconnect loop can re-handshake, matching how the
heartbeat timeout path already works.

IOCPClient now latches the transport per connection (m_useTls) at handshake
time instead of consulting TlsEnabled() on every send and receive. Without
the latch, the second or so between the reload and the reconnect would push
plaintext into an established TLS session, or the reverse, producing
protocol errors for no reason.

RES_TLS (szReserved[19]) is refreshed right before each login, including
the resend after a group change, so the TLS column on the server flips with
the transport instead of showing the value from process start.

The confirmation dialogs now say what each platform does, with translations
in en_US, zh_TW and de_DE; the keys carry the literal \n escape the INI
parser understands.

Ending a sub-connection is not an error. OpenSSL 3 classifies a peer that
closes without close_notify as an unexpected-EOF protocol error, so every
terminal or file transfer session logged an SSL_read failure on the real
servers even though Recv promises 0 for a plain close and neither side sends
close_notify. SSL_OP_IGNORE_UNEXPECTED_EOF restores the intended semantics.

Verified with the reload unit test (RELOAD-OK, covering the in-flight
connection across a context swap, garbage payload rejection and a broken
anchor keeping TLS alive), an abrupt-close test (recv now returns 0 instead
of SOCKET_ERROR) and end to end against a protocol-faithful fake server that
signs MasterSettings with libsign: plaintext login, 166, TLS reconnect with
RES_TLS=1, 167, plaintext reconnect with RES_TLS=0. The Linux client, the
Debug Windows client and the Debug MFC server all build.

The cost is inherent to taking effect immediately: a remote session in
progress is dropped when the transport changes, and the MFC server briefly
shows the client as a duplicate login until the old connection is reaped
and the standby entry is promoted.

Co-Authored-By: deepseek-flash
Co-Authored-By: Claude Code <noreply@anthropic.com>
2026-10-28 14:15:40 +01:00
yuanyuanxianganddeepseek-flash c11df75225 Fix: Report the real runtime instead of a timezone skew in host info
The host info popup showed a constant "7h" runtime for every Linux host.
szStartTime carries no timezone marker and the two sides disagree: the
Windows client sends its own wall clock (client/LoginServer.cpp
getProcessTime), while the Linux and Android clients send Beijing time
unconditionally (linux/main.cpp and common/commands.h ToPekingTimeAsString
hardcode UTC+8). GetElapsedTime then built the base time with CTime as
local time and subtracted it from the local clock, so on any server that
is not at UTC+8 the start time landed in the future; the absolute value
turned that skew into a plausible-looking duration (UTC+1 gives exactly
7h).

GetElapsedTime now picks the reference "now" by client type: LNX and APK
are compared against the current Beijing time, everything else keeps
using the local clock. A start time in the future now clamps to 0 instead
of being mirrored, so a clock disagreement shows as unknown rather than
as a fake runtime.

The Linux client also reported the wrong thing entirely: it sent the
current time at login, not the process start time, so the value was
always about zero whenever the timezones happened to agree. It now
records its own wall clock once at load and reports Beijing time built
from it, matching the semantics of the Windows client. An upgrade forks
a new process, so the counter restarts after an upgrade as expected.

The first implementation read /proc/self/stat starttime plus /proc/stat
btime, which looked like the exact equivalent of the Windows call, but
btime is computed from the wall clock at boot and never corrected when
NTP later steps the clock, so on WSL2 it drifted by 1.8h. Recording the
value in the process itself has no such failure mode.

Verified against a Debug server with a WSL Ubuntu 24.04 client and a
Windows client: the popup now reports "2.3m" for a Linux process started
2.3 minutes earlier (previously 7h), the startup timestamp is the process
load time in Beijing time, and the Windows host still reports 14s right
after it connects.

Co-Authored-By: deepseek-flash
2026-10-27 21:39:31 +01:00
yuanyuanxianganddeepseek-flash 4146c73657 Feature: Make Linux a copy_files_c2c destination
The C2C file transfer tool required both ends to be Windows clients. A Linux
client can already land the files: the Windows source worker builds every
entry name by plain string concatenation of dst_dir and the relative path, so
a POSIX dst_dir such as /tmp/recv arrives as "/tmp/recv\sub\file", which the
POSIX receiver normalizes to "/" and writes below an absolute path. What was
missing was the server gate and any way to tell whether the writes succeeded.

The server now accepts LNX/MAC destinations instead of rejecting them, and
validates dst_dir by destination type: an absolute Windows path for Windows
targets, an absolute POSIX path without backslashes for POSIX targets. The
paths and dst_dir arguments also reject embedded NULs, and a POSIX dst_dir is
converted to CP936 exactly so unencodable characters fail loudly instead of
silently becoming '?'.

To make receiver_ack meaningful, a Linux client that receives a C2C transfer
now reports what it wrote. It tracks the outcome per transferID, counting a
directory entry, the last chunk of a file and the completion packet of an
empty file as the three ways an item is settled, with done sets so that
source retries and the trailing completion packet never double count. When
every item is settled it sends one C2CSendResultPacket back on its main
connection under the new TOKEN_C2C_RECV_RESULT (176), with the first errno in
the win32err field and the mapped FEV2_* status. A dedicated token is used
instead of reusing 175 because a host can be the destination of one transfer
while being the source of another, and a destination result must never latch
the source side's done flag.

The server waits up to five seconds for that acknowledgement after the source
reports success, and only for destinations advertising the new
CLIENT_CAP_C2C_RECV_ACK capability bit (Linux only, macOS reports nothing).
A failed acknowledgement becomes -32011 with the status, errno and received
file count; a missing acknowledgement stays an error only for transfers that
actually moved bytes, since a transfer of empty files alone gives the
receiver nothing to learn totalFiles from. Windows destinations are unchanged
and skip the wait entirely.

Verified on the debug instance: Windows to Linux (WSL Ubuntu 24.04) with
subdirectories, an empty directory, a Chinese file name and a 3 MB binary
lands with matching SHA-256 and receiver_ack true; a Windows-style dst_dir
returns -32602; an unwritable POSIX destination returns -32011; the existing
Windows to Windows cases still pass with receiver_ack false and the same
latency.

Co-Authored-By: deepseek-flash
2026-10-27 19:22:12 +01:00
yuanyuanxianganddeepseek-flash 4c0e86dcc5 Feature: Upgrade a Linux client from the server
The Linux client is a standalone ELF with no in-memory loader and no
COMMAND_UPDATE handler, so the server's upgrade menu silently did nothing
for an LNX host. It can now push a new binary and have the client replace
and restart itself.

The server grows an LNX branch next to EXE/DLL/SC. It takes the ELF from an
explicit settings.ini LinuxClientPath, then ghost_linux_amd64 in the
program directory, then res\ghost_linux, then IDR_LINUX_GHOST, the copy
the server has always embedded for the client-build dialog, so a server
with nothing on disk can still upgrade; a configured path that cannot be
read is an error rather than a silent fallback. Only x86_64 ELF64 is
accepted. The payload adds a 32-byte MD5 trailer to the existing
[cmd][size:8][payload] layout, which the Windows branches keep unchanged.

linux/ghost in the tree is still the build from before this change and is
not updated here. It has to be refreshed before release: the embedded
default is copied from it at build time, and a stale copy would install a
client with no COMMAND_UPDATE handler, which can never be upgraded
remotely again.

The client verifies the declared size, elf magic, e_machine against its own
ELF header and the MD5 before touching anything, so a miscopied or corrupted
file never lands on disk. It then writes a same-directory temp file with
fsync and 0755 (a running executable cannot be truncated in place), renames
it over its own path atomically, keeps the replaced inode as .old, removes
the PID file, forks a detached child that waits for the old process to exit
and execs the new binary with the original argv, and finally exits with
S_CLIENT_UPDATE. Doing the rename and the exec in that order avoids ETXTBSY,
double connections under one client id, and a new instance that
isAlreadyRunning() would refuse to start.

Any failure (unwritable install directory, bad payload, fork) leaves the
client running on the old version; the reason goes to the client log and to
the server's message log through TOKEN_CLIENT_MSG, which required moving
that struct out of the Windows-only block in common/commands.h.

The shared client source had also stopped compiling off Windows: the
unknown-header diagnostic in IOCPClient::OnServerReceiving printed
TlsEnabled() and m_tls.IsReady() unconditionally, but TlsChannel and m_tls
only exist on Windows. That diagnostic now keeps the TLS details where the
channel exists and prints just the buffer dump everywhere else.

Verified end to end in WSL against the Debug server, foreground and -d
daemon: the PID changes, the installed file matches the pushed MD5, the host
reconnects, and ghost.old holds the previous binary. A read-only install
directory reports "cannot create ...: Permission denied" in the server log
with the client still online. With an invalid file at ghost_linux_amd64 the
server refuses it and names that path, which shows the disk source wins;
with nothing on disk the update goes through from the embedded ELF.

Co-Authored-By: deepseek-flash
2026-10-27 18:25:34 +01:00
yuanyuanxianganddeepseek-flash c271911fcb Feature: Add copy_files_c2c to transfer files between clients directly
Adds the 54th MCP tool, copy_files_c2c, which asks the source client to
push a set of files straight to another online client. Previously the only
way to move files between two clients was to download them to the server
machine and upload them again, so the data crossed the wire twice and
needed free disk on the server. With C2C the server only relays packets
and never parses or stores the payload.

Protocol. Two new ids in common/commands.h: COMMAND_C2C_SEND_FILES (174),
carrying the destination directory followed by a NUL-separated path list,
and TOKEN_C2C_SEND_RESULT (175), a fixed 45-byte result packet sent back
over the same sub-connection the transfer used. Clients advertise support
with the LOGIN_INFOR capability bit CLIENT_CAP_C2C_PATHS (0x0008), exposed
server side as Context::SupportsC2CPaths(). File transfer V2 already knew
how to push to dstClientID, so the destination side needed no change at
all; existing V2 receive paths keep working, and older clients simply do
not advertise the bit and are rejected with a clear error instead of
hanging.

Client. OnC2CSendFiles expands environment variables, collects directories
recursively, opens its own sub-connection (with sub-connection auth), and
runs FileBatchTransferWorkerV2 in a detached thread, then reports the
result on that same connection. Every early exit now reports a structured
failure rather than staying silent. The worker needs the process-level
InitFileUpload call that the receive path performs lazily, and a source
client may never have opened a file manager or received an upload, so the
initialization is factored into EnsureV2TransferInited() and called from
both paths.

Server. copy_files_c2c mirrors the existing upload tool: gates, id parsing,
capability checks, path validation, then a session keyed on the source host
that WaitC2CDone polls until the result packet arrives. The C2C relay
branch used to attach a CDlgFileSend progress dialog to the source's
sub-connection; NotifyProc then routed every later packet on that
connection to the dialog, which parsed the result packet as a V1 file
chunk and dropped it, so the tool always timed out even though the files
had arrived. IsC2CTransferPending() now suppresses dialog creation for
MCP-driven transfers only, leaving manual Ctrl+V transfers untouched.
Errors map to -32001 for a source-side transfer failure, -32010 for access
denied, -32009 for a missing path and -32002 for an offline destination.
Both hosts must be Windows: the destination is restricted too, because the
source embeds dst_dir in each V2 chunk name as an absolute Windows path and
only the Windows receiver applies it literally. A Linux or macOS receiver
never gets a target directory here (the clipboard flow sets one with
COMMAND_C2C_PREPARE, which this path does not send), so it would strip the
drive letter and write under / instead. Supporting that needs a prepare
packet carrying an explicit path plus an upgrade of those clients, so for
now the tool rejects them with -32005 rather than writing somewhere wrong.

Verified end to end on the Debug build: three files including a non-ASCII
name, an empty directory and a 3 MB binary arrived with matching SHA-256
in 3.2 s, a non-existent destination directory was created, and the
negative cases returned the documented codes. mcp_smoke.ps1 passes 41/41
with two new assertions and 27/27 in -SkipHost mode. Design notes, error
table and limitations are in docs/Mcp_FileTransfer_Design.md section 14
and docs/Mcp_Design.md section 15.

Co-Authored-By: deepseek-flash
2026-10-26 15:38:07 +01:00
yuanyuanxianganddeepseek-flash a7dd86ff0f Feature: Terminate TLS for the MCP endpoint inside YAMA
MCP was served by a plain httplib::Server, so remote clients could only use
cleartext HTTP. YAMA now terminates TLS itself: a small front-end owns the
MCP port, sniffs the first byte and either runs a Schannel handshake and
forwards the decrypted bytes or passes plaintext through, with httplib
moving to a loopback-only internal port. No OpenSSL, no frp change, existing
local HTTP clients keep working, and an unusable certificate fails closed
instead of falling back to cleartext.

The identity loader grew the two things a public certificate needs. ECDSA
(P-256/P-384/P-521) keys are persisted by importing PKCS#8 with an
NCRYPTBUFFER_PKCS_KEY_NAME parameter, the only route MS Software KSP
supports for Schannel; RSA keeps its old export-and-repersist path.
Fullchains are accepted, and the intermediates are added to the current
user's CA store so Schannel, which builds chains only from system stores,
actually sends them. The shared handshake also now buffers a full TLS
record before the first AcceptSecurityContext, which a partial ClientHello
would otherwise poison (SEC_E_UNKNOWN_CREDENTIALS).

Session resumption exposed a second trap: when a client resumes a session,
ChangeCipherSpec, Finished and the first application record arrive in one
segment and AcceptSecurityContext leaves the application record pending in
the session. Nothing drained it, because both callers only decrypt when new
ciphertext arrives, so the request waited until the peer gave up (the MCP
front-end saw no request at all and the client reported "fetch failed
(other side closed)"; the device port had the same hole behind its
occasional login timeouts). Decrypt now drains pending data on len == 0, and
both the front-end and the device port's handshake thread use it before
entering their receive loops.

Configuration is McpHttps, McpCertPath, McpKeyPath and McpInternalPort, the
first three editable in the MCP settings dialog (the certificate rows stay
greyed out until HTTPS is enabled and saving rejects missing files).

Verified with a real Let's Encrypt ECDSA fullchain (53 tools over TLS, 401
with no or bad token), a local three-level chain whose intermediate was
absent from the store, Node 24's fetch on a resumed session (initialize,
notifications/initialized and tools/list all complete), and the device
port's RSA handshake as a regression check. Details in docs/Mcp_Design.md
section 13.

Co-Authored-By: deepseek-flash
2026-10-26 13:56:41 +01:00
yuanyuanxianganddeepseek-flash b4cb34fea9 Fix: Stop MCP tool timeouts from popping MFC dialogs
A sub-connection's first packet doubles as the readiness packet: the file,
service, registry, process, log and terminal tools all get answered that way.
Once a tool has given up (timeout or failure) its pending entry is gone, so if
the client only gets around to sending that first packet afterwards,
MessageHandle cannot tell it apart from a human click and opens the matching
modeless dialog - a File Manager window appeared while timeouts were being
exercised on this machine.

The wait paths now record, per device, which first-packet token the abandoned
tool would have sent (MarkLateFirstPacketForTool from WaitPending,
WaitPendingRegistry, WaitPendingWrite, WaitFileTransferDone and
WaitTerminalReady), and every dialog-opening case consumes that marker before
falling back to the MFC path. The marker is one-shot, expires after five
minutes and is never set on the success path, so normal use is unaffected; the
worst case is that a single manual open on a host that just had an MCP timeout
is swallowed.

ClientMsg packets are dropped with a log line while a tool is pending for that
host: new clients still send the legacy popup message alongside the structured
failure token, which would otherwise put a modal box on the server UI during an
MCP call.

Co-Authored-By: deepseek-flash
2026-10-25 18:12:56 +01:00
yuanyuanxianganddeepseek-flash 3b1626f415 Feature: Turn client failure reports into branchable MCP errors
Wire the four new failure tokens into MessageHandle and translate them
in the tool builders, so the three previously silent failures now return
a code an agent can branch on: list_services on a non-elevated client is
-32010 in well under a second instead of a 20 s timeout, list_files and
list_registry distinguish a missing path or key (-32009) from an empty
one, and download_file no longer waits for the stall watchdog when the
remote path does not exist. Access denied gets its own code, -32010, and
the win32 code is kept in the message for every case.

TakeRegError fills both registry wait flags in one packet because a
failing client sends no subkey or value packet at all. OnDownloadError
sets the session error without cancelling the file-manager sub-connection,
which stays owned by ClearFileTransfer. ListRemoteTopLevelNames treats
"not found" as "directory not created yet" so uploading into a fresh
directory keeps working now that the client reports it.

Also converge the error codes that were overloaded: a multi-monitor host
is a capability limit, not a parameter mistake, so remote_open reports
-32005 instead of -32008. The tool wait timeout moves from a compile-time
constant to McpToolTimeoutMs in settings.ini (default 20000, clamped to
1-600 s), which makes it possible to tune without a rebuild.

The smoke test gains the three reproducible negatives.

Co-Authored-By: deepseek-flash
2026-10-25 17:59:21 +01:00
yuanyuanxianganddeepseek-flash 16f23e164c Fix: Clear the file transfer session when its sub-connection drops
A file transfer session holds raw pointers to its file-manager and
stream sub-connections, but nothing on the offline path looked at them.
OfflineProc cleans up terminal, remote-control and chat sessions and
skipped file transfers entirely, so a client that disconnected in the
middle of a transfer left the session pointing at a context that went
back to the connection pool. When the tool thread timed out it called
CancelIO on that stale pointer, which could cancel somebody else's
connection.

Add a context-to-device table next to the sessions, kept under the same
mutex and erased by ClearFileTransfer so a recycled pointer is never
mistaken for a live one. OfflineProc now calls
OnFileTransferContextClosed, which drops both pointers. A dropped
stream sub-connection means the transfer cannot complete, so it also
fails the session with error 1003 and wakes the waiting thread; the
file-manager sub-connection only issues the command and its loss is not
treated as a failure of the transfer itself.

Verified against the debug client: killing it 1.2 s into a 500 MB
download returns "Connection lost: the transfer sub-connection closed"
after about 1 s instead of waiting out timeout_ms, and the server stays
up. After the client restarts, two consecutive downloads and one upload
still work.

Co-Authored-By: deepseek-flash
2026-10-25 14:20:13 +01:00
yuanyuanxianganddeepseek-flash abe7e99a77 Feature: Harden the MCP transport and add non-destructive host tools
Cap MCP request bodies at 2 MB, set a 15 s idle read timeout and a 60 s
write timeout, and give httplib an explicit 32-thread pool: long tools
such as chat_wait hold a worker for up to 55 s, and the default pool of
8 to 15 left other callers queued.

Every tool returned by tools/list now carries readOnlyHint,
destructiveHint, idempotentHint and openWorldHint. The table is
per-tool; anything not registered defaults to destructive so a new
write tool cannot silently look harmless. Read-only tools are forced
to destructiveHint=false.

get_host_detail appends the technical fields the host store already
holds (cpuCores, memoryGB, systemBits, programBits, user, isAdmin,
installTime, expiredDate, monitors, exeVersion, clientPath, pid,
publicIp). The JSON writer is pinned to 15 significant digits so
memoryGB renders as 27.8 instead of 27.800000000000001. list hosts
output is unchanged.

Add host_set_remark and host_set_watch_level. Both validate the host
against the store, are refused in readonly mode, repaint the affected
row, and are audited without recording the value written.

Add search_file, which drives the client file-manager search channel
and returns paged results. The root path is normalized before sending:
the client enumerates with wsprintf("%s\*.*"), so a trailing
backslash produced C:\*.* and FindFirstFile failed, returning zero
hits instantly. The client only searches recursively, so non-recursive
requests are filtered server-side by comparing the parent directory.
Collection stops at 5000 records or 4 MB and the client is told to
stop; on timeout the partial results are returned. Search result
packets are never closed early: the sub-connection stays open until
TOKEN_SEARCH_FILE_FINISH, because the client's search thread holds a
pointer into the file manager object.

Batch reads report a skipped counter and are bounded to 50 ids and a
50 s deadline.

Add tools/mcp_smoke.ps1, a read-only end-to-end smoke test that asserts
auth rejection, the payload limit, annotation coverage, paging fields
and the main read tools. It takes the token from the environment and
never prints it.

Document all of the above in docs/Mcp_Design.md section 10, including
the client-side MAX_PATH stack overflow that a deep search_file call
can trigger, together with the workaround of searching shallow
directories.

Co-Authored-By: deepseek-flash
2026-10-25 13:59:17 +01:00
yuanyuanxianganddeepseek-flash ac5b174b5f Feature: Add offline hosts, batch reads and MCP hardening
Expose hosts the server already knows about. list_all_hosts enumerates
both live contexts and the historical records in the client list, with
authStatus as a three-state string instead of a boolean. search_hosts
now honours online=false instead of returning an empty list, while the
default stays online-only so existing callers see the same results.
get_host_detail falls back to the last known record for an offline host
rather than failing with -32002.

Let read-only tools take an ids array of up to 50 hosts in one call.
The batch path reuses the single-host dispatcher and pages per host, so
behaviour cannot drift; write tools reject ids with -32602 so a mistake
cannot fan out across machines.

Add get_keylog behind its own McpKeylog switch. It drives the client's
existing keylogger sub-connection, accumulates the streamed text for a
bounded window and byte cap, then closes the sub-connection and returns
UTF-8 lines. The client pushes its buffered history first, so a result
contains both history and fresh keystrokes; the tool description says so.

Harden the endpoint. Failed bearer checks are counted per source IP and
ten failures within a minute block the IP for fifteen minutes. Auth
failures and tool calls append to logs\mcp_audit.log with metadata only:
no token, no arguments, no response bodies, and rotation at 5 MB. Loopback
sources are audited but never blocked, because the built-in frp tunnel
makes every remote request arrive from 127.0.0.1 and banning that address
would lock out legitimate clients along with the attacker.

Give list-style tools one pagination contract (limit/offset plus
total/totalAll/hasMore) and fix the generated schemas so id and ids are
genuine alternatives: the stale required:[id] left over from the
single-host schema would otherwise reject ids-only calls.

Co-Authored-By: deepseek-flash
2026-10-25 12:44:45 +01:00
yuanyuanxianganddeepseek-flash 7160ea8f42 Fix: Stop the online-host list header from flickering
The list header is a child window of the list view, and
LVS_EX_DOUBLEBUFFER only covers the item area. The list view was created
without WS_CLIPCHILDREN, so every whole-list Invalidate or RedrawWindow
also erased the header with the class background brush before repainting
it. On top of that, AdjustColumnWidths ran on every WM_SIZE and issued an
unconditional SetColumnWidth per column, and each call repaints the
header. The result was an occasional one-frame blink of the header row:
irregular, low frequency, and confined to the header because the item
area is double-buffered.

Both lists now carry WS_CLIPCHILDREN, RDW_ALLCHILDREN was dropped from the
redraw calls that only need the list body (that flag forces child
repaints even when they are clipped), and column widths are only set when
they actually change.

The header still needs its background erase, but only for the strip to
the right of the last column: AdjustColumnWidths reserves 20px there and
the header's own paint stops at the last column, so that strip is colored
by WM_ERASEBKGND alone. Skipping the erase entirely left it black after a
minimize/restore cycle, when the window contents are discarded. The
header subclass now fills just that strip with COLOR_3DFACE and leaves the
column area untouched, which keeps the flicker fix, and the needRefresh
branch of OnSize forces an erase-redraw of the header so the strip is
repainted on minimize/restore and maximize/normalize.

Verified with a standalone probe that mirrors the list setup for the
header erase counts, and by rebuilding the app and checking the
minimize/restore case reported against the first version of this change.

Co-Authored-By: deepseek-flash
2026-10-24 15:45:49 +02:00
yuanyuanxianganddeepseek-flash c99a1c375e Feature: Add MCP tools for remote chat with the client user
Add chat_open, chat_send, chat_wait and chat_close to the MCP tool set,
behind a new McpChat switch that defaults to off and is independent of
the read-only switch. The tools reuse the existing client chat link: the
main connection sends COMMAND_CHAT, the client opens a sub-connection
with TOKEN_CONN_AUTH and TOKEN_CHAT_START, the server answers with
COMMAND_NEXT_CHAT, and both directions then carry raw CP936 text.

Sessions are per host and held in shared pointers under their own mutex,
so a waiting chat_wait survives a close or a dropped sub-connection, and
chat_send is serialised per session. Text is converted strictly between
UTF-8 and CP936: invalid UTF-8, characters GBK cannot represent (emoji,
accented letters) and messages over the client's 4000-byte buffer are
rejected with -32602 instead of being mangled. A one-second settle delay
after the sub-connection binds keeps the first message from reaching the
client before its chat window exists.

The routing hooks run before the host-management hooks in MessageHandle
and clear the route in OfflineProc before the context leaves the list. A
five-second tombstone absorbs a late TOKEN_CHAT_START after a timeout, so
a failed chat_open does not pop the MFC chat dialog. Idle sessions are
swept on every tool call, and audit entries record the session id and
byte counts only, never message bodies.

The settings dialog gains the chat checkbox and the translated labels
for all three languages, and the strict UTF-8 to CP936 helpers move from
McpMachine.cpp to McpInternal so both tool families can share them.

Co-Authored-By: deepseek-flash
2026-10-23 11:19:21 +02:00
yuanyuanxianganddeepseek-flash 38cd207f5d Feature: Add host management and connection management MCP tools
Expose the online-list TLS column through list_online_hosts, search_hosts
and get_host_detail. The value comes from the flag the client reports at
login, so old clients always read false.

Add list_network_connections and kill_network_connection on top of the
connection manager sub-connection protocol. The kill path matches the
original 110-byte record instead of rebuilding addresses, supports a dry
run, refuses UDP/IPv6 targets, and verifies that the quadruple really
disappeared instead of assuming success.

Add a host_* family backed by the machine manager protocol: ten read
tools covering every tab of the host management dialog, and four
recoverable write tools for process freeze/thaw, window restore/hide/
maximize/minimize, service start/stop/pause/continue/restart, and
scheduled task run/stop. Every write re-reads the snapshot before sending
and re-checks afterwards, reporting -32009 for stale targets rather than
acting blindly. The family is gated by McpMachine, the risky subset by
McpMachineDangerous, and writes additionally require read-only mode to
be off.

Route managed sub-connections from MessageHandle and OfflineProc, keep
the single-in-flight rule by sharing the pending table with a request
kind, and move the shared JSON/lock/encoding helpers into McpInternal so
both tool families use one implementation. Settings dialog, design docs
and en_US/zh_TW/de_DE translations are updated accordingly.

Co-Authored-By: deepseek-flash
2026-10-21 20:01:41 +02:00
yuanyuanxianganddeepseek-flash ca35e6e26f Feature: Add menu icons for the advanced and disclaimer entries
Add four 16x16 bitmaps and wire them through the existing m_bmOnline
table. The three entries under the "Advanced" menu had no icon at all,
and the disclaimer entry shared the help question mark with "what is
this", so the two were indistinguishable.

- desktop quality levels: a monitor with three ascending level bars in
  the screen
- screen preview levels: a thumbnail card with a sun, a folded corner
  and layered hills
- file transfer speed: a half-circle gauge with a red needle
- disclaimer: a document with a folded corner and an amber exclamation
  badge, so it no longer looks like the help entry

Grow the bitmap array to 75 entries and reserve resource IDs 412-415.

Co-Authored-By: deepseek-flash
2026-10-20 21:13:05 +02:00
yuanyuanxianganddeepseek-flash f76cd79bb0 Fix: Renew expired licenses from today and report the actual expiry
Preset renewal stored its target date as the old expiry plus the entered
days, while the authorization actually issued to the client is always
today plus a day count. For a license that had already expired, the
preset date was therefore in the past: SendPendingRenewal clamped the
day count to one, the client received a one-day license starting today,
but the renewal tip and the logs still printed the stale preset date.
The result was a message such as "renewed until 2026-05-30" while the
license really ran until tomorrow.

Presetting a renewal now bases the new date on today when the license
has already expired, and on the original expiry date otherwise, which
matches the one-day-per-day extension admins expect for live licenses.
The renewal dialog and the success prompt state which base was used, so
the computed date is never ambiguous. Renewal tips and both logging
paths (heartbeat-driven SendPendingRenewal and client-requested
GenerateRenewalInfo) now print the date that was actually issued, which
also corrects legacy preset records whose stored date has already
passed.

Co-Authored-By: deepseek-flash
2026-10-19 15:15:49 +02:00
yuanyuanxianganddeepseek-v4-pro e6b4fe3a85 Fix: reissue client_id on clone collision and harden V1 file-transfer command
撞 ID 的克隆机(同镜像 MachineGuid 相同导致 client_id 相同)此前会被服务端暂存为
替补、永远无法转正,从而不显示在主机列表。现在服务端检测到「client_id 相同但主机名
不同」时,主动下发 COMMAND_REGEN_CLIENT_ID,客户端在旧 ID 基础上掺随机 UUID 重算后
重连,以新 ID 正常上线;触发条件仅看主机名,排除 IP 漂移与纯用户名变化,避免误伤
正常重连的机器。

同时加固 V1 服务端→客户端文件传输:COMMAND_GET_FILE 指令的一次性 md5 令牌绑定登记
时的客户端源 IP(PutCmd/PopCmd 均带 peerIP),防止异常客户端冒用;并对指令包增加边界
校验(len 与 NUL 结尾),杜绝无 NUL 包导致的越界读。

Co-Authored-By: deepseek-v4-pro
2026-10-17 09:29:33 +02:00
yuanyuanxianganddeepseek-v4-pro d7b49a3d06 Feat: Add whitelist action to log-list right-click menu
Adds a "白名单" item after "解除封禁" in the message-log context menu.
It extracts the IP from each selected log entry, asks for confirmation,
then adds it to the shared IPWhitelist singleton — which IOCPServer and
the DLL rate limiter already consult live — so the entry takes effect on
new connections immediately, without a restart. The whitelist is
persisted to settings\IPWhitelist the same way the Network dialog does.

- An IP already in the whitelist is reported as such and skipped.
- An IP in the IP blacklist (banned) is reported as banned and skipped,
  rather than silently removed from the blacklist.
- Menu item, confirmation, and result strings are added to the
  en_US/zh_TW/de_DE language files.

Co-Authored-By: deepseek-v4-pro
2026-10-16 13:16:33 +02:00
yuanyuanxianganddeepseek-v4-pro 99e3bcbc6d Feat: Per-client TLS transport toggle (TLS column + remote enable/disable)
Add a per-client TLS transport toggle controlled from the server, using the
presence of the client's trust-anchor certificate in the registry as the
single source of truth (no separate tls_enable flag).

- Client reports its TLS status via a new RES_TLS token (cert present -> 1)
  appended to LOGIN_INFOR's reserved field.
- Server online list gains a "TLS" column after the permission column.
- The "experimental features" right-click menu gains "TLS传输" / "取消TLS"
  with confirmation and a guard that prompts (instead of sending) when the
  server has no TLS certificate ready.
- New COMMAND_TLS_ENABLE / COMMAND_TLS_DISABLE (166/167): the server pushes
  its cert PEM into the client registry settings\tls_cert (enable) or deletes
  it (disable). The client picks this up on next startup via the existing
  ReadTrustAnchor logic, so the switch is non-live by design.
- Icons and en_US/zh_TW/de_DE translations for the new menu items.

Co-Authored-By: deepseek-v4-pro
2026-10-16 07:04:54 +02:00
yuanyuanxianganddeepseek-v4-pro 8f02e73b9c Fix: Refresh MCP menu checkmark after settings change
The MCP settings menu item's checkmark was set only once at startup in
CreateSolidMenu, so toggling MCP in the settings dialog left the menu stale
until restart. Update the checkmark in OnMcpSettings after the dialog closes
so it matches [settings] McpEnabled immediately.

Co-Authored-By: deepseek-v4-pro
2026-10-15 19:43:58 +02:00
yuanyuanxianganddeepseek-v4-pro 77b688c981 Feat: Fold hostname into client ID and log clone-ID collisions
Cloned miniPC images share the same MachineGuid, so their client_id
collides and only one host appears in the list. Fold the hostname into
the V2 client-ID hash so hosts with distinct names no longer collide.
Already-persisted client IDs are unchanged: they recompute only after
the settings/client_id registry value is cleared.

Server side, when a login reuses an existing client_id but the hostname,
IP, or username differs, emit a WARN diagnostic before assigning the
connection to the standby list. Observation-only, no behavior change.

Co-Authored-By: deepseek-v4-pro
2026-10-15 19:43:58 +02:00
yuanyuanxianganddeepseek-v4-pro c93f09e9ac Feat: TLS certificate menu and config dialog for the MFC server
Add a "TLS证书" item to the Extensions menu below "MCP设置" that opens a
runtime-built dialog to enable one-way TLS and set the certificate and
private-key paths. On OK it writes the [tls] Enabled/CertPath/KeyPath keys
and calls ServerTlsIdentity::Load() so the change takes effect for new
connections immediately (design doc §7.1), mirroring the existing
CMcpSettingsDlg runtime-template pattern. All new strings are wired into
the en_US / zh_TW / de_DE language files, and the menu item is gated by
HIDE_MENU_TLS_CERTIFICATE / MF_TLS_CERTIFICATE like MCP settings.

Co-Authored-By: deepseek-v4-pro
2026-10-15 19:42:52 +02:00
yuanyuanxianganddeepseek-v4-pro d15cd77a28 Fix: Decode geographic location as UTF-8 across client and server
Geographic location (city, country) from the geo APIs is UTF-8, but the client
and several server paths converted or stored it in the system ANSI code page,
turning umlauts ("ö"/"ä") into "?" or GBK mojibake ("B枚blingen"). Keep the
value UTF-8 end to end: the client caches it as UTF-8 and re-queries once after
an upgrade (keyed by __DATE__, the app's version convention), while the server
stores and displays it as UTF-8 in the online list, the activity log, the
client-info export, JSON/email payloads and search.

Also add a confirmation prompt before opening a remote chat from the toolbar,
with German, English and Traditional-Chinese translations.

Co-Authored-By: deepseek-v4-pro
2026-10-10 13:58:38 +02:00
yuanyuanxianganddeepseek-v4-pro f3a8406050 Fix: Decode client file path correctly in client list and info popup
The client reports its own exe path as UTF-8 in RES_FILE_PATH. Two
display sites re-decoded those bytes with the wrong code page and turned
Chinese paths into mojibake on non-Chinese servers:

- The client-list "程序路径" column wrote ProgramPath through the ANSI
  SetItemText path, so the UTF-8 bytes were misread as the system ACP.
  Decode UTF-8 to wide and write with LVM_SETITEMTEXTW instead (same
  pattern as the window/process lists).

- The double-click info popup normalized the client RES_* fields to the
  system ACP and rendered strText with CP_ACP -> wide. The app's internal
  ANSI convention is fixed GBK/936 (/execution-charset:.936 plus
  setlocale(".936")), so on non-Chinese systems the path collapsed to '?'.
  Normalize to 936 and decode 936 instead, which also fixes the popup's
  GBK labels and username in the same pass.

Co-Authored-By: deepseek-v4-pro
2026-10-09 15:00:39 +02:00
yuanyuanxianganddeepseek-v4-pro ff6b290580 Fix: Decode process list names/paths as GBK on Windows
Process management decoded the client's process name/path bytes with
GetClientEncoding, which returns UTF-8 for CLIENT_CAP_UTF8 clients. But
the Windows client builds the process list with the ANSI A-interface
(Process32FirstA / QueryFullProcessImageNameA), which emits the client's
system code page (GBK on Chinese Windows) regardless of the UTF-8
capability -- unlike window titles, which were migrated to the
W-interface plus UTF-8. Decoding GBK as UTF-8 garbled Chinese process
names and paths.

Add GetProcessListEncoding(): 936 for Windows clients, UTF-8 for
LNX/MAC, matching McpServer::BuildListProcesses, and use it in
ShowProcessList (which still writes via LVM_SETITEMTEXTW).

Also raise the IP history cap to 1000 and rename the experimental
"隐私屏幕" menu item to "虚拟屏幕".

Co-Authored-By: deepseek-v4-pro
2026-10-09 14:05:52 +02:00
yuanyuanxianganddeepseek-v4-pro 6220335f63 Fix: Decode GBK dialog/toolbar text on non-Chinese systems
MBCS dialog templates are decoded with the system ANSI code page, so on
non-Chinese systems the GBK template strings turn into "?" before
TranslateDialog can read them. Set those strings explicitly in OnInitDialog
(PluginSettings save/close, the three Advanced dialogs, the file-manager
search buttons/checkboxes, and Trigger Settings) so they are re-decoded
with the thread locale. Also fix the language-selection dialog and the
toolbar "Lang/语言" button: the language dialog's template is built as
WCHAR strings but created through the ANSI path, so its title, label, and
buttons are set explicitly in OnInitDialog (AppendString stays on CP_ACP),
with the title looked up via _TR("切换语言") and set through SetWindowTextW
after an explicit GBK conversion; new en_US ("Switch Language") and zh_TW
("切換語言") translations accompany it. The toolbar button is set through
the Unicode TB_SETBUTTONINFOW message after an explicit GBK conversion. Add
en_US/zh_TW translations for the experimental-features context menu items.

Co-Authored-By: deepseek-v4-pro
2026-10-08 21:53:53 +02:00
yuanyuanxianganddeepseek-v4-pro 59fead7b5f Fix: Deliver file-transfer speed via MasterSettings (was CMD_FILE_SPEED)
The file-transfer speed dialog previously sent a separate CMD_FILE_SPEED
(5 bytes) back-to-back before COMMAND_SCREEN_SPY / COMMAND_LIST_DRIVE when
opening remote desktop or file manager. The IOCP send path batches two
consecutive Send2Client calls into one WSASend of the accumulated
OutCompressedBuffer, so the client received the [FILE_SPEED][SCREEN_SPY]
command stream twice - the root cause of two remote-desktop dialogs popping
up on a single click (introduced in commit 76decec).

Fold the two values into MasterSettings (TransferChunkKb / TransferDurationMs,
uint16 each, before Reserved, sizeof unchanged at 1000) so they reach every
client on login and are broadcast to online clients when the dialog saves.
The client persists them into [transfer] on CMD_MASTERSETTING, guarded by
TransferChunkKb != 0 so older masters keep local defaults. CMD_FILE_SPEED(252)
and its client handler remain for backward compatibility, but the master no
longer sends it.

Update the design doc, the three GBK lang files' prompt entry, and the READMEs.

Co-Authored-By: deepseek-v4-pro
2026-10-07 21:19:04 +02:00
yuanyuanxianganddeepseek-v4-pro 3928dd76a3 Feature: Add icons to experimental features submenu
Add 16x16 menu icons for the three experimental-features items in the
online-host right-click menu: file management (folder), privacy screen
(shield with padlock), and drawing board (paintbrush). The new bitmaps
follow the existing #F0F0F0-background 32bpp convention and are wired
into the m_bmOnline array via LoadBitmap and SetMenuItemBitmaps, using
the same pattern as the other nested-submenu items.

Co-Authored-By: deepseek-v4-pro
2026-10-06 18:05:14 +02:00
yuanyuanxianganddeepseek-v4-pro d80d8f21da Feature: Add auth-failed trigger type (授权失败触发)
Add a second trigger type TRIGGER_AUTH_FAILED alongside the existing
TRIGGER_HOST_ONLINE. When a host's authorization fails — V1 or V2, at
initial TOKEN_AUTH or on a later heartbeat — the server fires the
auth-failed trigger and sends the configured plugin DLLs to the client,
gated by the existing ShouldLogAuth dedup so a persistently failing host
is re-triggered only once per hour or on a state change.

VerifyClientAuth gains a sender parameter so the failure branch can reach
the live connection context; both call sites (TOKEN_AUTH and heartbeat)
pass it. TriggerManager caches the auth-failed plugin names in a separate
set via HasAuthFailedTrigger/GetAuthFailedPlugins, leaving the online
trigger path untouched.

Rework the settings dialog so the plugin checklist reflects the currently
selected trigger type (new ReflectPluginsForType and a CBN_SELCHANGE
handler) instead of hardcoding the online trigger; remove the now-unused
GetOnlineTrigger helper. Add "授权失败" translations to en_US, zh_TW and
de_DE.

Co-Authored-By: deepseek-v4-pro
2026-10-06 17:50:30 +02:00
yuanyuanxianganddeepseek-v4-pro d269df9171 Feature: Migrate SimplePlugins drawing board (远程画板迁移)
Migrate the SimplePlugins remote drawing-board overlay into the YAMA client
as an "实验功能" right-click submenu entry. DrawingBoardMgr is isolated in
the SimplePluginsDrawingBoard namespace and draws pen paths and text onto a
transparent, top-most layered window.

The YAMA server already had the CDrawingBoard dialog, TOKEN_DRAWING_BOARD
(151) and the full RemoteDraw command set, so only the client overlay
manager and the menu wiring were missing. Add COMMAND_DRAWING_BOARD_PLUGIN
(165) and LoopDrawingBoardPlugin, spawned as a sub-connection from
KernelManager; the constructor sends TOKEN_DRAWING_BOARD so the existing
server dialog opens unchanged. Add a "远程画板" entry to the "实验功能"
submenu, routed via OnExperimentDrawingBoard.

Co-Authored-By: deepseek-v4-pro
2026-10-05 10:52:58 +02:00
yuanyuanxianganddeepseek-v4-pro 2fb6252285 Feature: Migrate SimplePlugins privacy screen (隐私屏幕迁移)
Migrate the SimplePlugins privacy-screen (virtual desktop) feature into the
YAMA client as an "实验功能" right-click submenu entry. The capture layer is
rewritten rather than copied: CScreenHideSpy now subclasses YAMA's ::CScreenSpy
(vDesk=TRUE) so capture and encoding reuse YAMA's encoder pipeline instead of
SimplePlugins' diverged jpeg capture chain; CScreenManagerBase and
CScreenHideManager are migrated under the SimplePluginsScreenHide namespace,
and SimplePlugins-only ALGORITHM_DEFAULT is mapped to ALGORITHM_DIFF.

Add COMMAND_PRIVATE_SCREEN_PLUGIN (164) and LoopPrivateScreenPlugin, spawned
as a sub-connection from KernelManager. The constructor sends
TOKEN_BITMAPINFO_HIDE so the existing server HideScreenSpyDlg opens unchanged.
Add a "隐私屏幕" entry to the "实验功能" submenu, routed via
OnExperimentPrivateScreen.

Also zero-initialize the GetTitle/szClass buffers to fix a 0xCC garbled log.

Co-Authored-By: deepseek-v4-pro
2026-10-05 10:41:04 +02:00
yuanyuanxianganddeepseek-v4-pro 2c3e1ca518 Feature: Migrate SimplePlugins file management (文件管理迁移)
Migrate the SimplePlugins file-management feature into the YAMA client as an
experimental feature. The migrated CFileManager, MasterEncoder and Info-Zip
sources live under client/file/ and are isolated in the SimplePluginsFile
namespace to avoid clashing with the native FileManager class.

Add COMMAND_FILE_MANAGER_PLUGIN (163) and LoopFileManagerPlugin, spawned as
a sub-connection from KernelManager. Add an "实验功能" submenu with a
"文件管理" entry above "客户管理" in the online-hosts right-click menu,
routed via OnExperimentFileManager to the existing TOKEN_DRIVE_LIST_PLUGIN
dialog path.

Co-Authored-By: deepseek-v4-pro
2026-10-05 10:09:26 +02:00
yuanyuanxianganddeepseek-v4-pro f72fda9b71 Feature: Machine management (主机管理)
Migrate the MachineManager client from SimplePlugins and wire the server toolbar.

Client:
- Add CMachineManager (process/window/net/software/IE history/favorites/service/task/hosts
  enumeration plus process injection via yapi.hpp).
- Add COMMAND_MACHINE_MANAGE (162) and spawn the manager on an authenticated
  sub-connection in KernelManager.
- Register MachineManager.cpp/.h and yapi.hpp in both client projects.

Server:
- Add the 主机管理 toolbar button (index 18, after 远程交谈) reusing the IDI_MACHINE icon,
  plus en/zh_TW/de translations.

Fix:
- Free the IEnumSTATURL strings (su.pwcsUrl/su.pwcsTitle) with CoTaskMemFree, release the
  enumerator, and set STATURL.cbSize to stop the IE-history leak reported by VLD.

Co-Authored-By: deepseek-v4-pro
2026-10-04 21:03:03 +02:00
yuanyuanxianganddeepseek-v4-pro 6c9fef8793 Feature: Two-way remote chat (远程交谈)
Add a "远程交谈" toolbar button (placed after 连接管理) that sends COMMAND_CHAT(161) to the selected host. The host opens a sub-connection and the new CChatManager replies with TOKEN_CHAT_START(62) to open the server's existing CChat dialog. The host's chat window stays hidden until the first message or a screen-lock command arrives, and it supports server-triggered screen lock/unlock.

Co-Authored-By: deepseek-v4-pro
2026-10-04 19:55:29 +02:00