Feature: remote desktop tuning flags, on by default with per-item opt-out

Adds "Advanced -> Remote desktop tuning" with three independently
checkable items, all enabled by default:

  x264 bitrate cap (VBV)       TUNING_X264_VBV        0x1
  GDI capture: no slice delay  TUNING_GDI_NO_SLEEP    0x2
  Send pacing FPS floor        TUNING_PACE_FPS_FLOOR  0x4

Unticking an item clears its bit and restores the pre-commit behaviour
exactly, so the escape hatch is one click per measure -- no rebuild, no
config edit. Each bit is independent; a problem with one does not force
turning all three off.

Plumbing
--------
Menu state -> [settings] Tuning* -> CMy2015RemoteDlg::GetScreenTuningFlags()
  -> CScreenSpyDlg::SendScreenTuning()  (right after TOKEN_BITMAPINFO)
  -> CMD_SCREEN_TUNING = 178 [cmd:1][flags:4 LE]
  -> CScreenManager::OnReceive -> m_nTuningFlags -> ScreenCapture::SetTuningFlags

Why it is safe to send to old clients: CScreenManager::OnReceive has no
default branch in its switch, so an unknown command falls straight out
(verified). 178 was unassigned (177 = COMMAND_SET_PROTO, 199 =
TOKEN_DECRYPT), and the enum re-anchors explicitly so nothing auto-
increments onto it.

Flags are sent even when all-zero on purpose: the client's flag lives in
CScreenManager, which survives closing and reopening the remote desktop
window on the same connection. Without the zero send, unticking the menu
would leave the previous flags in effect.

Per-measure notes
-----------------
VBV: capped CRF (peak = target, 0.5s buffer, init 0.9). The hardware
paths already cap via rc_max_rate (1.5x, 1s buffer); this is tighter and
only affects x264. After an IDR the buffer drains and takes up to 0.5s
to refill, so a brief quality dip follows every keyframe -- if that shows
up, relaxing to 1.5x/1s would match NVENC/QSV.

GDI: keeps the 50-line BitBlt slicing (large single BitBlts hit driver
limits) and only drops the 5ms sleep between slices -- 1080p is 22 slices
= a forced 110ms per frame against a 50ms budget at 20fps.

Pacing: clamps s0 to 2x the base interval instead of 4x (2fps -> 4fps),
taken as max(2x base, 1000/MaxFPS) so it never exceeds the configured
MaxFPS. The growth/decay code itself is untouched. This one works against
the loop's own congestion signal, so it is the first to untick if a bad
link feels laggier rather than smoother.

SetTuningFlags only rebuilds the encoder when TUNING_ENCODER_BITS
(currently just VBV) changes -- the GDI and pacing bits are read live by
the capture and send threads, and rebuilding for them would drop an IDR
and visibly flash the picture.

Defaults: the on-by-default value lives in the third argument of
THIS_CFG.GetInt(), which only applies when the key is absent. A machine
that already has an explicit 0 keeps it, so the flip is not retroactive
and a test machine can end up with a mixed state.

Verified on the Debug build: with no Tuning* keys all three items start
checked; unticking VBV alone leaves the other two checked and survives a
restart; en_US/de_DE/zh_TW translations all resolve. Not yet measured end
to end on a real remote desktop session.
This commit is contained in:
yuanyuanxiang committed 2026-11-04 14:47:40 +01:00
1 parent 1e336113a5
commit ca4e85826f
19 files changed
+239 -9

No files matched your search

+5
View File
@@ -23,6 +23,11 @@ struct EncoderParams {
int crf = 23; // 当 rc == CRF
int bitrate_kbps = 4000; // 当 rc == BITRATE
int gop_seconds = 15; // 关键帧间隔(秒),与 x264 i_keyint_max=fps*15 对齐
// 给 CRF 编码加 VBV 峰值上限(capped CRF)。硬编路径本来就是 VBR + rc_max_rate,
// 天然有上限;x264 走纯 CRF 时没有,复杂帧能冲到目标码率好几倍,跨洲际会堵死链路。
// 默认 false = 不加 VBV,与历史行为一致,由主控端「远程桌面调优」开关打开。
bool vbv_cap = false;
};
class VideoEncoderBase {