Feature: Switch a Linux client's transport TLS at runtime

The server's TLS menu already wrote the trust anchor into the Windows
client's registry and expected a restart. The Linux client grew the same
command handling (166/167) but, like Windows, only read the anchor once at
startup, so enabling or disabling TLS still meant restarting it. Both
handlers now take effect immediately.

TlsChannelLinux.cpp no longer initialises through std::call_once. The
process-level state (context, enabled, load error) lives behind a mutex and
TlsReload() rebuilds it from whatever anchor file is on disk, so
TlsEnabled() reflects the new transport as soon as the anchor is written or
removed. In-flight sessions survive the swap because SSL_new increments the
SSL_CTX reference count; the unit test pins that down by keeping an
established TLS connection open across a reload that frees the old context.
A reload that hits a bad anchor keeps the previous state and only logs: one
bad push should not brick a working client, and the next start is still
fail-closed. The pushed PEM is parsed before it is written for the same
reason -- a corrupt anchor on disk would lock the client out of the server
with no way to correct it remotely.

Only a real transport flip (plaintext <-> TLS) asks for a reconnect. An
anchor swap alone, as in a certificate rotation, leaves the current session
alone and applies to the next connection. The receive thread never closes
the socket itself; it sets g_needReconnect and the main heartbeat loop
disconnects so the outer reconnect loop can re-handshake, matching how the
heartbeat timeout path already works.

IOCPClient now latches the transport per connection (m_useTls) at handshake
time instead of consulting TlsEnabled() on every send and receive. Without
the latch, the second or so between the reload and the reconnect would push
plaintext into an established TLS session, or the reverse, producing
protocol errors for no reason.

RES_TLS (szReserved[19]) is refreshed right before each login, including
the resend after a group change, so the TLS column on the server flips with
the transport instead of showing the value from process start.

The confirmation dialogs now say what each platform does, with translations
in en_US, zh_TW and de_DE; the keys carry the literal \n escape the INI
parser understands.

Ending a sub-connection is not an error. OpenSSL 3 classifies a peer that
closes without close_notify as an unexpected-EOF protocol error, so every
terminal or file transfer session logged an SSL_read failure on the real
servers even though Recv promises 0 for a plain close and neither side sends
close_notify. SSL_OP_IGNORE_UNEXPECTED_EOF restores the intended semantics.

Verified with the reload unit test (RELOAD-OK, covering the in-flight
connection across a context swap, garbage payload rejection and a broken
anchor keeping TLS alive), an abrupt-close test (recv now returns 0 instead
of SOCKET_ERROR) and end to end against a protocol-faithful fake server that
signs MasterSettings with libsign: plaintext login, 166, TLS reconnect with
RES_TLS=1, 167, plaintext reconnect with RES_TLS=0. The Linux client, the
Debug Windows client and the Debug MFC server all build.

The cost is inherent to taking effect immediately: a remote session in
progress is dropped when the transport changes, and the MFC server briefly
shows the client as a duplicate login until the old connection is reaped
and the standby entry is promoted.

Co-Authored-By: deepseek-flash
Co-Authored-By: Claude Code <noreply@anthropic.com>
This commit is contained in:
committed 2026-10-28 14:15:40 +01:00
1 parent c11df75225
commit 6bfa4294cc
11 files changed
+824 -48

No files matched your search

+95
View File
@@ -51,6 +51,10 @@ CONNECT_ADDRESS g_SETTINGS = { FLAG_GHOST, "91.99.165.207", "443", CLIENT_TYPE_L
// 全局状态
State g_bExit = S_CLIENT_NORMAL;
static std::atomic<bool> g_needResendLogin(false); // 分组变更后需要重发登录信息
// 传输层热切换(服务端 COMMAND_TLS_ENABLE/DISABLE 改了信任锚)后需要重建连接。
// DataProcess 跑在接收线程上,直接关 socket 会和主线程的发送竞争,所以只置标志,
// 由主心跳循环择机 Disconnect 并重连。
static std::atomic<bool> g_needReconnect(false);
// 自升级(COMMAND_UPDATE):fork+execv 重启自己时需要原始命令行,
// 失败回报需要主连接(DataProcess 的 user 参数为 NULL,只能靠全局)。
@@ -378,6 +382,28 @@ void* FileManagerThread(void* /*param*/)
return NULL;
}
// 信任锚已落盘/已删除:热重载 TLS 状态,必要时请求主循环重建连接。
// 只在传输方式真正变化(明文↔TLS)时重连;仅换证书(仍是 TLS)不打断现有会话,
// 新锚从下一条新连接开始生效。
static void ApplyTlsAnchorChange(void* user)
{
bool before = TlsEnabled();
std::string err;
if (!TlsReload(err)) {
Mprintf("** [%p] TLS reload failed: %s (keeping current transport) ***\n", user, err.c_str());
return;
}
bool after = TlsEnabled();
if (before == after) {
Mprintf("** [%p] TLS trust anchor updated, transport unchanged (%s) ***\n",
user, after ? "TLS" : "plaintext");
return;
}
g_needReconnect.store(true);
Mprintf("** [%p] TLS transport switched to %s, reconnecting ***\n",
user, after ? "TLS" : "plaintext");
}
int DataProcess(void* user, PBYTE szBuffer, ULONG ulLength)
{
if (szBuffer == nullptr || ulLength == 0)
@@ -481,6 +507,32 @@ int DataProcess(void* user, PBYTE szBuffer, ULONG ulLength)
// 标记需要重发登录信息(让服务端更新分组显示)
g_needResendLogin.store(true);
Mprintf("** [%p] Group changed to: %s ***\n", user, groupName.c_str());
} else if (szBuffer[0] == COMMAND_TLS_ENABLE) {
// 服务端下发信任锚证书(载荷与 Windows 一致:szBuffer+1 起为 PEM 正文)。
// Windows 写注册表 settings\tls_cert;Linux 写 ~/.config/ghost/yama-ca.pem。
// 与 Windows 不同:Linux 落盘后热重载并重连,立即切换(Windows 仍需重启进程)。
if (ulLength > 1) {
std::string pem((char*)szBuffer + 1, ulLength - 1);
std::string err;
if (TlsTrustAnchorSave(pem, err)) {
Mprintf("** [%p] TLS trust anchor received and saved ***\n", user);
ApplyTlsAnchorChange(user);
} else {
Mprintf("** [%p] TLS trust anchor save failed: %s ***\n", user, err.c_str());
}
} else {
// 没有证书正文就等于「启用但没有锚」——不该悄悄忽略,留一行便于排查。
Mprintf("** [%p] COMMAND_TLS_ENABLE without a certificate payload, ignored\n", user);
}
} else if (szBuffer[0] == COMMAND_TLS_DISABLE) {
// 撤销信任锚:删除配置文件并热重载,当前连接若是 TLS 就重连回明文。
std::string err;
if (TlsTrustAnchorRemove(err)) {
Mprintf("** [%p] TLS trust anchor removed ***\n", user);
ApplyTlsAnchorChange(user);
} else {
Mprintf("** [%p] TLS trust anchor removal: %s ***\n", user, err.c_str());
}
} else if (szBuffer[0] == COMMAND_UPDATE) {
// 服务端"升级程序"菜单下发新版本 ELF
Mprintf("** [%p] Received 'UPDATE' command (%u bytes) ***\n", user, (unsigned)ulLength);
@@ -1032,6 +1084,37 @@ static void ApplySelfUpdate(const PBYTE szBuffer, ULONG ulLength)
g_bExit = S_CLIENT_UPDATE;
}
// 登录信息 szReserved 里的 [19] RES_TLS 是「当前」传输状态的快照,服务端在线列表的
// TLS 列就取这个值。热切换后重连会重新登录,必须在这里刷新,否则列里会一直显示旧值。
// 只在主线程调用(与 SendLoginInfo 同一线程),避免和接收线程抢同一个结构体。
static void RefreshLoginTls(LOGIN_INFOR& info)
{
std::vector<std::string> fields;
std::string s(info.szReserved);
size_t pos = 0;
for (;;) {
size_t bar = s.find('|', pos);
if (bar == std::string::npos) {
fields.push_back(s.substr(pos));
break;
}
fields.push_back(s.substr(pos, bar - pos));
pos = bar + 1;
}
while (fields.size() <= (size_t)RES_TLS)
fields.push_back("");
fields[RES_TLS] = TlsEnabled() ? "1" : "0";
std::string joined;
for (size_t i = 0; i < fields.size(); ++i) {
if (i)
joined += '|';
joined += fields[i];
}
strncpy(info.szReserved, joined.c_str(), sizeof(info.szReserved) - 1);
info.szReserved[sizeof(info.szReserved) - 1] = '\0';
}
// 用法: ./ghost [-d] [IP] [端口]
// -d 后台守护进程模式
// 示例: ./ghost -d 192.168.1.100 6543
@@ -1191,6 +1274,7 @@ int main(int argc, char* argv[])
logInfo.AddReserved(std::to_string(g_myClientID).c_str()); // [16] RES_CLIENT_ID
logInfo.AddReserved((int)getpid()); // [17] RES_PID
logInfo.AddReserved(getFileSize(exePath).c_str()); // [18] RES_FILESIZE
logInfo.AddReserved(TlsEnabled() ? 1 : 0); // [19] RES_TLS(有信任锚即 1)
// 服务端签名输入:与服务端 AddList 处签名格式一致(startTime + "|" + clientID)
ClientAuth::g_loginMsg = std::string(logInfo.szStartTime) + "|" + std::to_string(g_myClientID);
@@ -1210,6 +1294,8 @@ int main(int argc, char* argv[])
// 进入新连接,重置服务端身份校验状态
ClientAuth::OnNewConnection();
// 传输方式可能已被热切换(TLS 启/停),登录上报的 RES_TLS 必须反映本次连接。
RefreshLoginTls(logInfo);
ClientObject->SendLoginInfo(logInfo.Speed(clock() - c));
// 新连接:把 ACK 看门狗喂到当前时间,避免循环刚进来就被误判为超时
@@ -1228,6 +1314,7 @@ int main(int argc, char* argv[])
strncpy(logInfo.szPCName, hostname, sizeof(logInfo.szPCName) - 1);
}
logInfo.szPCName[sizeof(logInfo.szPCName) - 1] = '\0';
RefreshLoginTls(logInfo);
ClientObject->SendLoginInfo(logInfo);
Mprintf(">> Resent login info after group change\n");
}
@@ -1235,10 +1322,18 @@ int main(int argc, char* argv[])
// 等待心跳间隔(每秒检查一次退出条件,保证及时响应)
int interval = g_heartbeatInterval > 0 ? g_heartbeatInterval : 30;
for (int i = 0; i < interval; ++i) {
if (g_needReconnect.load(std::memory_order_relaxed))
break;
if (!ClientObject->IsRunning() || !ClientObject->IsConnected() || g_bExit != S_CLIENT_NORMAL)
break;
Sleep(1000);
}
// 信任锚热切换(COMMAND_TLS_ENABLE/DISABLE):断开后由外层循环用新传输方式重连。
if (g_needReconnect.exchange(false)) {
Mprintf(">>> Reconnecting to apply the TLS transport change\n");
ClientObject->Disconnect();
break;
}
if (!ClientObject->IsRunning() || !ClientObject->IsConnected() || g_bExit != S_CLIENT_NORMAL)
break;